Vehicle Service Tools: Setting and Locking Tools
|
Shop for Vehicle Service Tools and other garage equipment in the
Classic Wheels online toolstore
You're in the setting and locking tools section of the Classic Wheels toolshop, describing these and other
vehicle service tools available at the Classic Car World (CCW) online store.
CCW are a specialist supplier of workshop and garage tools over the 'net, and listed below are the setting and locking tools
they have for sale in the vehicle service tools area of their catalogue. For their very latest prices please visit their site.
As well as low prices on new setting and locking tools, you can find hundreds of other tools, just check out the left hand
category menu and have a look around at other vehicle service tools they have. They stock all the leading brands, such
as Sealey.
|
| Diesel & Petrol Engine Setting/Locking Tool Kit 2 |
| A comprehensive set of setting and locking tools designed for use on a wide range Citroen and Peugeot PSA engined vehicles. Designed for use on both diesel and petrol engines. Some components also suitable for Rover, FSO, LDV, Tata and Fiat applications. Supplied in carry-case with warning tag. Applications: Petrol - Citroen: AX, Saxo, C15, BX, ZX, Berlingo 1.0/1.1/1.4, Saxo 1.6 16v Twin Cam, Visa, ZX, BX 1.6/1.8/1.9/2.0, Xsara 1.8, Xantia 1.6/1.8/2.0, Synergie 2.0, Relay 2.0, Xsara/Xantia 1.8 16v, BX Gti, ZX, Xantia, XM 2.0 16v Twin Cam. Petrol - Peugeot: 1.0/1.1/1.4 - 106, 205, 306, 309, Partner, 405: 106 1.6 16v: 1.6/1.9 - 205, 305, 309, 405:1.6/1.8/1.9/2.0 - 205, 306, 309, 405, 406, 605, 806, Boxer: 1.8 16v - 306, 406: 2.0 16v - 306, 309, 405, 406, 605. Diesel - Citroen: 1.4D AX, ZX: 1.5D - AX, Saxo: 1.7D/1.8D/1.9D - Visa, BX, ZX, Xsara, Xantia, Synergie, C15D, Berlingo, Dispatch, Relay: 2.1D - Xantia, XM, Synergie: 2.5+DI - XM, Relay. Diesel - Peugeot: 1.4D/1.5D -106: 1.8D/1.9D - 205, 305, 306, 309, 405, 406, 806, J5, Partner, Expert, Boxer: 2.1D - 406, 605, 806: 2.5+DI - 605, Boxer. Also some models of FSO, LDV, Tata and Fiat. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS121 info) |
| |
| Belt Guide Roller Adjuster - GM V6 |
| Suitable for adjusting the position of the upper and lower guide rollers on the Vauxhall/Opel V6 EcoTec engine. Helps ensure that the timing belt is taut during installation and to assist initial belt tension. Use in conjunction with VS130 setting/locking |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS1301 info) |
| |
| Belt Tension Tester - Universal |
| Ensures accurate and consistent assessment of cam belt tension. Simple to use. Suitable for all common types of timing belt. Set includes belt gauge, tension gauge, tension buttons and calibration strip. Supplied in foam lined carry-case. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS009 info) |
| |
| Camshaft Setting Tool VAG |
| Suitable for VW 1.4 and 1.6 twin camshaft/twin belt engines introduced in 1997. Dependant on engine variant, either the complete bridge and pins or the pins alone may be used.
Applications:
VW Group: 1.4 & 1.6 16v twin cam engines.
Audi: A2.
Seat: |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS1246 info) |
| |
| Camshaft Setting/Adjusting Tool - GM |
| Used in conjunction with VS106 camshaft setting tool and AK9634M dial gauge. Provides means of rotating camshaft by small increments to obtain cam lobe reading necessary for accurately setting valve timing. Also restrains camshaft whilst retightening sprocket bolt. Applications: 1.6 and 1.7 OHC GM diesel engines - Astra, Cavalier and Vectra. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS1065 info) |
| |
| Crank Pulley Holding Tool Seat |
| Suitable for holding crankshaft on selected Seat twin cam petrol engines.
Applications:
Seat: Arosa, Ibiza/Cordoba, Toledo, Leon 1.4 16v (99on).
Engine Codes: AFK, AHW, APE, AQQ, AUA, AUB, AXP Ibiza/Cordoba 1.4 16v (95-99) AFH.
Additional Diesel App |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS12471 info) |
| |
| Crank Pulley Holding Tool VAG |
| Suitable for VW Group 1.4 & 1.6 16v twin cam petrol engines (97on). Use in conjunction with VS1246 twin cam locking set for timing belt replacement.
Applications:
Audi: A2 1.4 16v (00) AUA.
VW: Lupo, Polo/Classic, Golf, Bora & Caddy.
Engine Codes: A |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS12470 info) |
| |
| Crank Pulley Holding Tool VAG |
| Suitable for VW Group 1.4 & 1.6 16v twin cam petrol engines (97on). Use in conjunction with VS1246 twin cam locking set for timing belt replacement.
Applications:
VW: Lupo, Polo/Classic, Golf, Bora & Caddy.
Engine Codes: ARC, ATN, AUS, AVY, AZD |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS12473 info) |
| |
| Crankshaft Pulley Holding Tool - Land Rover/Rover KV6 |
| Use in conjunction with VS1290 kit for Rover KV6 engine variants. Designed to counter-hold the crank pulley whilst releasing and tightening the centre bolt. The pulley must be removed for timing belt replacement.
Applications:
Rover: 45 & 75 - 2.0 & 2 |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS1292 info) |
| |
| Crankshaft Pulley Remover & Installer - Ford |
| Suitable for removal and installation of free-floating crankshaft pulley. Essential tool for timing belt replacement on certain Zetec 16v engines. The only way to perform timing belt replacement without risk of damage to the engine.
Applications: Ford: |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS1013 info) |
| |
| Diesel & Petrol Engine Setting/Locking Kit - Ford |
| The most comprehensive kit for Ford cars and car-derived vans. Tools suitable for engine timing and timing belt replacement on the complete range of Zetec 16v petrol engines and all 1.8 diesels and turbo diesels including the 1.8 direct injection Endura e |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS1012 info) |
| |
| Diesel & Petrol Engine Setting/Locking Tool Kit 19 |
| Suitable for all Rover models detailed below including latest 2.0 SDI direct injection engine. Designed for use on both diesel and petrol engines. Includes petrol twin-cam locking tools. Supplied in carry-case with warning tag. Applications: Petrol: Metro Gta/GTI 16v Twin Cam, 214/414, 216 Gti 16v Twin Cam, 216/416 16v Twin Cam, 220/420/820 16v Twin Cam, 618/620, 620Ti 16v Twin Cam, 820, 12v, MGF 1.8 Twin Cam. Diesel: Metro/114D/115D,1.4/1.5D, Maestro/Montego 2.0D, 218SD/ 418SLD, 220D/ 420D/ 620D. Also some models of Citroen/Peugeot, FSO, Tata, LDV, Fiat, Honda, Land Rover. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS120 info) |
| |
| Diesel & Petrol Engine Setting/Locking Tool Kit 7p |
| A comprehensive set of setting and locking tools designed for use on all the Renault models detailed below. Designed for use on petrol and diesel engined vehicles. Supplied in carry-case with warning tag. Applications: Petrol: 1.2 - Clio, Twingo, Kangoo. 1.4/1.6 - Clio, Express, Kangoo, R19, Megane. 1.7 - R5, Clio, R19, Laguna, Traffic. 2.0 - Megane. 1.8/2.0 16v Twin Cam Clio Williams, R19, Megane. 2.0/2.2 - R21, R25, Safrane, Espace, Master, Traffic. Diesel: 1.6D - R5, R9, R11, Express. 1.9D - Clio, Express, R19, R21, Megane. 1.9D - Kangoo. 2.1D - Espace, Fuego, R21, R25, Master, Traffic. 2.1D - Safrane. 2.2D - Laguna, Safrane, Espace, Espace. 2.5D - Safrane, Master, Traffic. Also some models of Volvo, Fiat, Chrysler, Vauxhall and Mitsubishi. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS122 info) |
| |
| Diesel & Petrol Setting/Locking & Timing Kit 43pc |
| The most complete kit of timing and setting tools for French engine applications available. Suitable for new Di and twin cam engines and includes unique Multi-Lock timing device which can be used to lock camshaft to fuel injection pump in sync'. Includes tools for camshaft, injection pump, crank lock, tensioner adjustment, twin cam setting and RAM/EPIC injection timing adjustment. Supplied in carry-case with full applications listing and warning tag. Applications: Setting/Locking - Citroen, Peugeot, Renault Diesel and Petrol Engines. Also engines fitted in Fiat/Iveco, Vauxhall, Rover, Volvo, LDV, Chrysler, Mitsubishi, FSO and Tata. Fuel Injection Pump Timing/Adjustment - Renault RAM timing system and PSA EPIC injection pumps. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS125 info) |
| |
| Diesel and Petrol Engine Setting/Locking Kit 10pc |
| Comprehensive set of essential locking and setting tools for timing belt replacement on a huge range of diesel and petrol engines in VW Group vehicles. Includes camshaft, injector pump locking tools and cam belt tensioner tools. Applications: Diesel and Petrol versions of - Audi, Seat, Skoda, VW. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS124 info) |
| |
| Diesel Engine Camshaft Locking & Fuel Injection Pu |
| Kit contains specialised tools required for cam belt replacement without losing the engine camshaft and injection pump timing. Suitable for 2.5D, 200TDi and 300TDi engines fitted to Land Rover, LDV and LTI Carbodies vehicles. Supplied in carry-case with application and operation guidelines. Applications: Land Rover - 2.5D Defender 90/110 (to91). 200TDi - Defender 90/110, Discovery (89on), Range Rover Classic (93 on). 300TDi - Defender 90/110, Discovery, Range Rover Classic (95on). LDV - Sherpa 285, 310, 350, 2.5D. LTI Carbodies - Taxi FX45 2.5D. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS129 info) |
| |
| Diesel Engine Camshaft Locking Tool 4pc - GM |
| Location peg fixes camshaft for alignment without altering TDC position. Suitable for Mk1 and Mk2 Vauxhall/Opel 1.6 and 1.7 OHC diesel engines, as fitted to Astra, Belmont, and Cavalier. Suitable for use when changing camshaft belt. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS105 info) |
| |
| Diesel Engine Camshaft Setting Tool 4pc - GM |
| Carriage plate and gauge adaptor foot accepts AK9634M dial gauge (not included). Allows camshaft lobe position to be accurately checked and set for valve timing. Suitable for Vauxhall/Opel 1.6 and 1.7 OHC diesel engines, as fitted to Astra, Cavalier and Vectra. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS106 info) |
| |
| Diesel Engine Locking Set 3pc - Rover & Land Rover |
| Set contains flywheel locking tool, injection pump tool and cam belt tensioner tool. Supplied with warning tag. Applications: Rover - 220D, 420D, 620D. Land Rover - Freelander 2.0 'L series' diesel engines. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS123 info) |
| |
| Diesel Engine Piston Travel Adaptor |
| Suitable for use when setting fuel timing on XUD engines, as fitted to Citroen, Rover and Peugeot vehicles, where it is necessary to time the fuel pump relative to a known position before TDC. Suitable for use with AK9634M dial gauge (not included). |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS109 info) |
| |
| Diesel Engine Setting & Locking Kit 8pc - VW V6 Td |
| A dedicated set of setting/locking, support and tensioner adjusting tools for the VW 2.5 V6 diesel engines introduced in 1997. Includes front valance access sliding pins and tensioner adjustment tools. Applications: VW Group 2.5TDi V6 diesel. Audi: A4, A6, A8. VW: Passat AFB/AKN. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS1240 info) |
| |
| Diesel Engine Setting Locking Kit 2.0Di/2.2Di - GM |
| Essential tools for timing and setting new Di series EcoTec engines. Includes camshaft setting and locking tools. Additionally the kit contains a timing adjustment assembly which is used to fix the fuel pump timing and cam sprocket position during the engine timing procedure. Supplied with warning tag, comprehensive instructions and carry-case. Applications: Vauxhall/Opel X20DTL/X20DTH/X22DTH 2.0Di and 2.2Di EcoTec diesel engines. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS131 info) |
| |
| Diesel Engine Setting/Locking & Fuel Pump Timing 3 |
| Up-to-date master service kit for a wide variety of vehicles. Provides a comprehensive range of engine setting and locking tools to maintain datums and adjust timing on the engine and fuel injection pump. Includes dial gauge plus applications and instructions. Supplied in carry-case and supplied with warning tag. Applications: Setting/Locking: Audi, Citroen, Fiat, Ford, Mazda, Peugeot, Rover, Seat, Vauxhall/Opel, Volkswagen, Volvo. Fuel Injection Pumps: Bosch, Diesel Kiki, Nippon Denso VE Rotary, CAV/Rotodiesel. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS100 info) |
| |
| Diesel Engine Setting/Locking Kit - Fiat |
| Diesel setting/locking kit suitable for later model 1.9D/TD and JTD (common rail) diesels. Also suitable for the 2.1TD and 2.4TD engines. Supplied with warning tag, comprehensive instructions and carry-case. Applications: Fiat 1.9D/TD/JTD, 2.1TD & 2.4TD - Brava/Bravo, Marea/Weekend, Multipla, Punto, Scudo, Ulysse. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS1405 info) |
| |
| Diesel Engine Setting/Locking Kit - Fiat 1.7D/1.7D |
| Set includes crankshaft locking tool and camshaft setting tool. Supplied with warning tag and comprehensive instructions. Applications: Fiat 1.7D, 1.7DT. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS1406 info) |
| |
| Diesel Engine Setting/Locking Kit - Fiat 1.9D |
| Set includes crankshaft locking tool and camshaft setting tool. Supplied with warning tag and comprehensive instructions. Applications: Fiat 1.9D (Non-Turbo). |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS1407 info) |
| |
| Diesel Engine Setting/Locking Kit - Fiat 1.9DT |
| Set includes crankshaft locking tool and camshaft setting tool. Supplied with warning tag and comprehensive instructions. Applications: Fiat 1.9DT (Turbo). |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS1408 info) |
| |
| Diesel Engine Setting/Locking Kit 13pc - Euro |
| Suitable for Audi, Citroen, Peugeot, Volkswagen and Volvo vehicles. Manufactured from cropped steel stock. Supplied in carry-case. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VSE102 info) |
| |
| Diesel Engine Setting/Locking Kit 13pc - Rover |
| Cropped steel stock, chemically treated for corrosion resistance. Suitable for Rover group vehicles. Applications: Petrol: Metro Gta, GTI 16v Twin Cam, 111, 114, 214, 414, 216/416, Gti 16v Twin Cam, 820 8v. Diesel: Metro 1.4LD, 1.4SD. Maestro 2.0D, 2.0D Turbo. Maestro 500/700. Montego 2.0DT, 218SD, 218SLD T, 418 SLD T, 418 GSD T. Sherpa LD200. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VSE103 info) |
| |
| Diesel Engine Setting/Locking Kit 8pc - Ford |
| Cropped steel stock. Suitable for Ford 1.6 and 1.8 diesel engines as fitted to Fiesta, Escort, Orion, P100, Sierra, Mondeo. Transit 2.5DI (85 on) and Galaxy 1.9TD. Supplied in carry-case. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VSE101 info) |
| |
| Diesel Engine Setting/Locking Kit 9pc - Ford & VW |
| Suitable for setting and locking all current Ford diesel engines except Focus, but including 1.8TD/DI and Galaxy. Also incorporates tools for locking Volkswagen, Audi, Volvo, Mazda 121, Seat and Skoda. Supplied in carry-case with operating guide and warning tag. Applications: Ford - all diesel models (except Focus). Audi - A4, 80 and 100. Seat - Cordoba, Ibiza, Terra, Toledo. Volvo - 240, 740, 760, 940D/Turbo. Volkswagen - Polo 1.3S/ 1.4D, Golf/ Jetta/Cadoba 1.5/1.6D/Turbo, Golf/Vento 1.9TD, Passat/ Santana TD and 1.9TD, Transporter and LT diesel engines. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS1011 info) |
| |
| Diesel Engine Setting/Locking Kit Citroen & Peugeot HDI |
| Timing tool set for engine timing or belt replacement. Suitable for new PSA common rail diesel engines designated DW8 (1.9D) and DW10/DW12 (2.0/2.2Hdi). Includes warning tag.
Applications:
Citroen; Xsara, Berlingo, Dispatch/Jumpy - DW8 (WJZ0) 1.9D, Xa |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS1210 info) |
| |
| Diesel Engine Setting/Locking Kit Ford/VAG |
| Suitable for engine timing and belt replacement procedures on Pumpe Duse diesel engines fitted to VW group vehicles and Ford Galaxy from 1999 on. Set contains Crank Locking Tool, Camshaft Pin and Tensioner Tools to suit 1.2TDi, 1.4TDi and 1.9TDi engine v |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS1245 info) |
| |
| Diesel Engine Setting/Locking Plate - Ford |
| Camshaft setting and locking plate for late model Ford 1.8 diesel engines found in Fiesta 1.8D, Escort 1.8D, 1.8TD and Mondeo 1.8TD. Supplied with warning tag. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS116 info) |
| |
| Diesel Engine TDC Set 3pc - GM 1.7td |
| Flywheel and crankshaft TDC setting tool and locking pin now supplied with injection pump locking pin. Supplied with warning tag. Applications: GM(Vauxhall/Opel) X17DTL 1.7 diesel engines found in Astra-F and Astravan. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS1171 info) |
| |
| Diesel Fuel Pump Timing Kit 13pc - Bosch, Lucas/CA |
| A set of tools suitable for timing Bosch, Diesel Kiki, Nippon Denso VE Rotary or Lucas CAV Rotodiesel fuel injection pumps. Kit now includes Bosch adaptor for pumps fitted with M10 service ports commonly found on VW/Audi, Volvo, Renault and Ford Transit. Supplied in carry-case with AK9634M dial gauge together with application and operation guide. Applications: Fuel Injection Pumps: Bosch, Diesel Kiki, Nippon Denso VE Rotary, CAV/Rotodiesel (top entry). |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS1131 info) |
| |
| Diesel Pump Timing Tool Set - Bosch M8, M10, & M12 |
| Combination tool suitable for use on Bosch VE type fuel injection pumps and also for new pump with M10 service port. Also fits Kiki and Nippon Denso pumps. Includes adaptors and control rods. Adaptors supplied with 8mm threads plus M10 and M12 adaptors. M10 adaptor is new and is suitable for service ports commonly found on VW/Audi, Volvo, Renault and Ford Transit. Use in conjunction with AK9634M dial gauge and if timing XUD engines, VS109 piston travel adaptor (neither included). |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS1079 info) |
| |
| Diesel Timing Kit 12pc - GM |
| Suitable for setting timing on GM (Vauxhall/Opel) vehicles from 1987 onwards. Updated set covers latest X17DTL variants and includes camshaft setting plate and dial gauge for the 1.6 and 1.7D engines, flywheel setting tool for the 1.7DTL (to97) and locking pin for 1997 onward vehicles. Includes locking bolts for Isuzu engines. Supplied in carry-case with warning tag. Contents: Camshaft Setting Tool, TDC Setting Tools, AK9634M Dial Gauge. Use in conjunction with VS1065 Camshaft Holding/Setting/Adjusting Tool for accurate timing adjustment. For applications before 1987, use optional VS105. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS1141 info) |
| |
| Extension Piece for VS777 |
| Standard VS777 bar allows reach of between 28 and 92mm. Extension bar increases this up to between 90 and 160mm allowing tool to be used for wider range of vehicle applications including some single cam diesel engines where cam and fuel pump can be locked together to reduce cam-belt changing times. Use in conjunction with VS777 |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS777E info) |
| |
| Flange Repositioning Tool PSA 16V |
| Used on Hpi versions of the 2.0 PSA twin-cam 16v engine to counter-hold the crank pulley flange whilst releasing and tightening the centre bolt during final timing adjustment.
Applications:
Citroen; C5 - 2.0 16v EW10J4D (RLZ) - Hpi.
Peugeot; 406 - |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS1212 info) |
| |
| Flywheel Holding Tools |
| It is often necessary to remove the crankshaft pulley when replacing the timing belt. The pulley retaining bolt is fitted with a high torque loading and the flywheel must be securely locked during installation/removal. Jamming tools into the teeth of the flywheel will cause serious damage to both teeth and housing. These locking tools securely locates in the teeth and fixes to the housing using manufacturer's guidelines. Suitable for petrol and diesel engines. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS1280 info) |
| |
| Flywheel Holding Tools |
| It is often necessary to remove the crankshaft pulley when replacing the timing belt. The pulley retaining bolt is fitted with a high torque loading and the flywheel must be securely locked during installation/removal. Jamming tools into the teeth of the flywheel will cause serious damage to both teeth and housing. These locking tools securely locates in the teeth and fixes to the housing using manufacturer's guidelines. Suitable for petrol and diesel engines. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS1281 info) |
| |
| Flywheel Holding Tools |
| It is often necessary to remove the crankshaft pulley when replacing the timing belt. The pulley retaining bolt is fitted with a high torque loading and the flywheel must be securely locked during installation/removal. Jamming tools into the teeth of the flywheel will cause serious damage to both teeth and housing. These locking tools securely locates in the teeth and fixes to the housing using manufacturer's guidelines. Suitable for petrol and diesel engines. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS1282 info) |
| |
| Flywheel Holding Tools |
| It is often necessary to remove the crankshaft pulley when replacing the timing belt. The pulley retaining bolt is fitted with a high torque loading and the flywheel must be securely locked during installation/removal. Jamming tools into the teeth of the flywheel will cause serious damage to both teeth and housing. These locking tools securely locates in the teeth and fixes to the housing using manufacturer's guidelines. Suitable for petrol and diesel engines. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS1283 info) |
| |
| Flywheel Holding Tools |
| It is often necessary to remove the crankshaft pulley when replacing the timing belt. The pulley retaining bolt is fitted with a high torque loading and the flywheel must be securely locked during installation/removal. Jamming tools into the teeth of the flywheel will cause serious damage to both teeth and housing. These locking tools securely locates in the teeth and fixes to the housing using manufacturer's guidelines. Suitable for petrol and diesel engines. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS1284 info) |
| |
| Flywheel Holding Tools |
| It is often necessary to remove the crankshaft pulley when replacing the timing belt. The pulley retaining bolt is fitted with a high torque loading and the flywheel must be securely locked during installation/removal. Jamming tools into the teeth of the flywheel will cause serious damage to both teeth and housing. These locking tools securely locates in the teeth and fixes to the housing using manufacturer's guidelines. Suitable for petrol and diesel engines. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS1285 info) |
| |
| Flywheel Holding Tools |
| It is often necessary to remove the crankshaft pulley when replacing the timing belt. The pulley retaining bolt is fitted with a high torque loading and the flywheel must be securely locked during installation/removal. Jamming tools into the teeth of the flywheel will cause serious damage to both teeth and housing. These locking tools securely locates in the teeth and fixes to the housing using manufacturer's guidelines. Suitable for petrol and diesel engines. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS1286 info) |
| |
| Flywheel Holding Tools |
| It is often necessary to remove the crankshaft pulley when replacing the timing belt. The pulley retaining bolt is fitted with a high torque loading and the flywheel must be securely locked during installation/removal. Jamming tools into the teeth of the flywheel will cause serious damage to both teeth and housing. These locking tools securely locates in the teeth and fixes to the housing using manufacturer's guidelines. Suitable for petrol and diesel engines. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS1287 info) |
| |
| Flywheel Holding Tools |
| It is often necessary to remove the crankshaft pulley when replacing the timing belt. The pulley retaining bolt is fitted with a high torque loading and the flywheel must be securely locked during installation/removal. Jamming tools into the teeth of the flywheel will cause serious damage to both teeth and housing. These locking tools securely locates in the teeth and fixes to the housing using manufacturer's guidelines. Suitable for petrol and diesel engines. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS1288 info) |
| |
| Flywheel Positioning Tool |
| Locates in the teeth on the flywheel enabling precise positioning of crankshaft. Suitable for use when working on clutches, transmissions, pistons and any other job that requires accurate positioning of the crankshaft. Ideal for positioning timing marks. Heat treated, black oxide finished head with chromed shaft and comfortable handle. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS161 info) |
| |
| Land Rover EDC Timing Pin |
| Suitable for locking the flywheel in the timed position on Land Rover models fitted with EDC (Electronic Diesel Control) and manual transmission. Application: Land Rover 300TDi with EDC - Manual Gearbox. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS1291 info) |
| |
| Petrol Engine Camshaft & Crankshaft Tools - Audi & |
| Essential tools for locating the camshaft and crankshaft during timing belt replacement and other service applications. Applications: Audi A4, A6 2.4 (97on)/2.8 (97on) ALG, S4 2.7 Turbo (97on) AGB, VW Passat 2.8 30V (96on) ACK. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS1243 info) |
| |
| Petrol Engine Camshaft & Crankshaft Tools - Audi V |
| Essential tools for locating the camshaft and crankshaft during timing belt replacement and other service applications. Applications: Audi 80, 100, A4, A6, A8, Coupe/Cabrio 2.6/2.8 (91on) ABC/AAH. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS1242 info) |
| |
| Petrol Engine Cylinder Leakage Tester |
| Powered by a workshop compressed air supply and used to detect a variety of common engine faults including: Worn piston rings, worn valves, cracks in cylinder walls and blown head gaskets. Gauge shows % of cylinder leakage. Suitable for use with any petrol vehicle with 14 or 18mm spark plugs. Supplied in composite case with instructions. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS202 info) |
| |
| Petrol Engine Locking/Setting Kit - Fiat 1.4 12V |
| Includes camshaft setting plate which is fitted in place of the cam bearing cap and crankshaft locking tool to ensure that engine timing is accurately retained. Supplied with warning tag, comprehensive instructions and carry-case. Applications: 1.4 12v Fiat SOHC Engines - Brava/Bravo, Marea/Weekend. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS1401 info) |
| |
| Petrol Engine Locking/Setting Kit 1.0/1.2L - GM |
| Set includes camshaft setting plate, crankshaft locking pin and chain tensioner locking pin. In addition, the kit provides the timing disc position gauge, essential for establishing the correct position of the timing sensor disc located on the inlet camshaft sprocket. Applications: Vauxhall/Opel - X10XE 1.0 12V, X12XE 1.2 16V EcoTec engines on Corsa and Agila. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS132 info) |
| |
| Petrol Engine Setting /Locking Kit 3pc - Ford & Ma |
| Camshaft setting and locking plate. Updated set now covers Zetec engines found in Focus, Mondeo and Cougar from 98 on. Also covers Ford 1.6, 1.8 and Twin Cam 16V petrol engines. Crank shaft TDC location for Ford 1.25 and 1.4 engines plus the Puma 1.7 engine. TDC pin also suitable for Mazda 121 1.25 litre petrol engines. Supplied with warning tags. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS1152 info) |
| |
| Petrol Engine Setting/Locking & Timing Kit 5pc - T |
| Suitable for use on BMW M42, M44 and M50 twin cam engines. Essential for timing chain, sprocket or camshaft removal. Includes setting/locking plate, crankshaft TDC pin and secondary chain timing tool. Supplied with warning tag. Applications: BMW - M42, M44 and M50 engines. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS126 info) |
| |
| Petrol Engine Setting/Locking Kit - Land Rover/Rover KV6 |
| Set includes all engine timing belt replacement tools for the 2.0 and 2.5 variants of the KV6 quad cam engine. The tools necessary to time later versions of these engines are not all the same as the tools needed to time earlier engine types. However this |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS1290 info) |
| |
| Petrol Engine Setting/Locking Kit 2pc - Ford & Maz |
| Camshaft setting and locking plate. Suitable for Ford 1.6, 1.8 and Twin Cam 16V petrol engines. Crankshaft TDC location for Ford 1.25 and 1.4 engines plus the Puma 1.7 engine. TDC pin also suitable for Mazda 121 1.25ltr petrol engines. Supplied with warning tags. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS115 info) |
| |
| Petrol Engine Setting/Locking Kit Alfa Romeo V6 24V |
| Suitable for setting and locking Alfa Romeo 2.5 V6 quad cam engine. Kit contains camshaft setting plates to accurately position the four camshafts in their timed positions. The kit also includes a tensioner tool for adjusting the timing belt tension. Note |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS1410 info) |
| |
| Petrol Engine Setting/Locking Kit Citroen/Peugeot/Renault V6 |
| Suitable for setting and locking Renault 3.0 V6 (L7X) engines and Citroen/Peugeot V6 (XFZ) engines (97-01). Set contains locking pins for camshafts and crankshaft, camshaft holding tool and tensioner tools. Set also includes timing pin for checking valve |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS1213 info) |
| |
| Petrol Engine Setting/Locking Kit PSA 16V |
| Provides basic essential tools for timing belt replacement on the new generation of 1.8 and 2.0 PSA twin-cam 16v engines fitted to Citroen and Peugeot models. The set also covers models fitted with Hpi version of the 2.0 engine. Supplied with warning tag. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS1211 info) |
| |
| Petrol Engine Setting/Locking Tool Kit 5pc - GM & |
| Locking and setting tools for V6 EcoTec multi-valve GM engine. Use to maintain crankshaft gear and camshaft sprockets at TDC for belt removal, renewal and installation. Includes timing gauge for checking camshaft sprocket timing mark during installation. Supplied in carry-case with warning tag. Applications: Vauxhall/Opel: Cavalier/Vectra/Calibra 2.5I, Omega-B 2.5i/3.0I, Sintra 3.0I, ECO-Tec V6 multi-valve engine. Saab: 900 2.5V6, 9000 3.0V6. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS130 info) |
| |
| Petrol Engine Timing Belt Tensioner 1.0/1.2L - GM |
| The auxiliary drive belt on the 1.0 and 1.2 EcoTec engines is tensioned by a spring loaded roller. The VS133 consists of a tensioner wrench and tension retaining pin which are used to remove the tension in the belt so that it can be safely removed. Applications: Vauxhall/Opel - X10XE 1.0 12V, X12XE 1.2 16V EcoTec engines on Corsa and Agila. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS133 info) |
| |
| Petrol Engine Timing Tool 2pc - BMW M40 & M43 |
| Locking tools designed for setting camshaft and crankshaft timing positions. Precision-machined components ensure accurate location on cam. Essential for timing belt and chain changes. Suitable for BMW M40 and M43 engines fitted to 316i, 318i and 518i vehicles. Supplied in carry-case with warning tag and operating guidance. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS118 info) |
| |
| Petrol Engine Twin Cam Locking Kit - Alfa Romeo |
| Locking tools suitable for Alfa Romeo engines include cam locking plates which fit in the place of the camshaft bearing caps. Kit also includes timing/balancer shaft belt tensioner tools. Applications: 1.4, 1.6, 1.8, 2.0 twin cam, Twin Spark engines. Alfa Romeo 145, 146, 147, 155, 156, 166, Spider/GTV (95on). |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS1409 info) |
| |
| Petrol Engine Twin Cam Setting/Locking Kit 13pc |
| Updated kit designed to lock the camshafts on twin-cam (multi-valve) engines in order to stop them rotating out of timed position during removal of cam belt. Incorrect timing can cause serious damage to inlet and exhaust valves due to contact with piston head. Saves time by removing the need to re-time the engine following cam-belt changes. Colour coded, investment cast locking tools and precision-machined pins ensure accurate fit and aids quick tool selection. Supplied in carry-case with warning tag, instructions and parts list. Applications: Twin Cam Engines - Ford, Honda, Land Rover, Mazda, Rover, Vauxhall/Opel (early models and EcoTec). |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS171 info) |
| |
| Petrol Twin Cam Locking/Setting Kit - Fiat 1.2 16V |
| The 1.2 Fiat engine timing is assessed with all 4 pistons in-line. This kit includes piston positioning tools and camshaft setting tools. Also includes cam belt tension adjuster. Supplied with warning tag, comprehensive instructions and carry-case. Applications: 1.2 16v Fiat Twin Cam Engines - Punto, Brava/Bravo. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS1400 info) |
| |
| Petrol Twin Cam Locking/Setting Kit - Fiat 1.6 16V |
| Includes camshaft setting plates which are fitted at the rear of the camshafts to lock them in their timed positions. Supplied with cam belt tension adjustment and flywheel retention tools. Use in conjunction with VS1404 piston TDC tool and AK9634M dial gauge. Supplied with warning tag, comprehensive instructions and carry-case. Applications: 1.6 16v Fiat Engines(95on) - Brava/Bravo, Marea/Weekend, Multipla, Palio. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS1402 info) |
| |
| Petrol Twin Cam Locking/Setting Kit - Fiat 1.8 16V |
| Covers both variants of the 1.8 16v Fiat engine from 1995 on. Includes colour coded camshaft setting plates which are fitted in place of the camshaft bearing caps to enable retention of camshaft timing position. Supplied with cam belt tension adjustment and flywheel retention tools. Use in conjunction with VS1404 piston TDC tool and AK9634M dial gauge. Supplied with warning tag, comprehensive instructions and carry-case. Applications: 1.8 16V Fiat Engines (95on) - Barchetta, Brava/Bravo, Coupe, Marea/Weekend. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS1403 info) |
| |
| Setting/Locking Kit - Renault |
| Suitable for engine timing and belt replacement applications on the latest range of Renault 1.4, 1.6, 1.8 and 2.0 16v engines. Supplied with warning tag.
Applications: Renault; Clio 1.4, 1.6 16v, Megane/Scenic 1.4, 1.6 16v, Laguna 1.6 16v, K4J/K4M engi |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS1220 info) |
| |
| TDC Position Tool - Fiat |
| Used in conjunction with AK9634M dial gauge (not included) and enables accurate interpretation of piston position relative to TDC. Applications: Fiat 1.6 16v, 1.8 16v, 2.0 20v, Alfa Romeo Twin Spark. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS1404 info) |
| |
| Tension Adjuster VAG |
| Essential specialist wrench suitable for adjusting timing belt tension on VW group petrol engines.
Applications:
Audi: A6 1.6 (96on) ALZ.
Seat: Ibiza, Cordoba, Leon, Toledo 1.6 (99on) AEH, AKL,
APF, AUR, Alhambra 2.0 (00on) ATM.
Skoda: Octavia 1.6 |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS12472 info) |
| |
| Tensioner Adjuster - Renault |
| Specialist adjustment tool required to apply tension to timing belt on Renault diesel engines.
Applications: Renault; Laguna 2.2D (94-96) G8T diesel engines |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS1221 info) |
| |
| Tensioner Adjuster - Renault |
| Peg style adjustment tool required to apply tension to timing belt on Renault diesel engines.
Applications: Renault; Fuego, R18, R20, R21, R25, R30, Espace, Trafic, Master - J8S diesel engine |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS1222 info) |
| |
| Twin Cam Locking Tools - EcoTec |
| Designed to fit between camshaft pulleys on Vauxhall EcoTec petrol engines. Essential when removing or replacing timing belt. Helps retain manufacturer's timing positions. Supplied as a pair. Applications: Vauxhall EcoTec petrol engines 1.4, 1.6, 1.8, 2.0 and 2.2 16v engines. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS1700 info) |
| |
| Universal Timing Belt Pulley Locking Tool |
| One of the most versatile engine tools on the market. Lock single cam and two cam V engines fast and effectively. Suitable also for locking the injection pump sprocket on diesel engines. Compact, investment cast body allows use on the widest range of engi |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS780 info) |
| |
| Universal Twin/Quad/Diesel Camshaft Locking Tool |
| Unique new time-saving device suitable for locking the position of camshafts to retain engine timing positions. Also acts as a second pair of hands to hold camshafts in position during timing belt replacement. Huge range of application coverage from closely positioned sprockets on many twin cams to more widely spaced cam/injector pump sprockets on certain diesel engines. Incorporates tooth pitch adjustment covering varying sprocket diameters and tooth pitches. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS777 info) |
| |
