Wood Working: Power Saws
|
Shop for Wood Working and other garage equipment in the
Classic Wheels online toolstore
You're in the power saws section of the Classic Wheels toolshop, describing these and other
wood working available at the Classic Car World (CCW) online store.
CCW are a specialist supplier of workshop and garage tools over the 'net, and listed below are the power saws
they have for sale in the wood working area of their catalogue. For their very latest prices please visit their site.
As well as low prices on new power saws, you can find hundreds of other tools, just check out the left hand
category menu and have a look around at other wood working they have. They stock all the leading brands, such
as Sealey.
|
| 250mm Table Saw 1500Watt |
| Professional quality table-top saw fully approved to CE regulations and backed by independent laboratory certification. Compound angle cutting permitted by full tilt and height adjustment (up to 45ø) of cutting arbor. Fitted with no-volt release safety switch and approved riving knife for added user safety. Includes twin dust-free adaptor, rip-fence and mitre gauge. Supplied fitted with BS approved 13Amp non-rewirable plug. |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code TS10CZ info) |
| |
| Abrasive Disc Cut-Off Saws |
| General-purpose abrasive disc saws suitable for portable site use. Fitted with powerful trigger operated, motor. Hardened gears give smooth transmission of power. Fitted with mitre vice for angle cutting pipe, bar and tube. Supplied with metal cutting disc. Models fully compliant with the Supply of Machinery (Safety) Regulations 1992 (S.I.3037) and fully CE approved. Fitted with fully approved plugs and cables. Models available in both 230V and 110V for site use. |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code MG214/110V info) |
| |
| Abrasive Disc Cut-Off Saws |
| General-purpose abrasive disc saws suitable for portable site use. Fitted with powerful trigger operated, motor. Hardened gears give smooth transmission of power. Fitted with mitre vice for angle cutting pipe, bar and tube. Supplied with metal cutting disc. Models fully compliant with the Supply of Machinery (Safety) Regulations 1992 (S.I.3037) and fully CE approved. Fitted with fully approved plugs and cables. Models available in both 230V and 110V for site use. |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code MG214/230V info) |
| |
| Abrasive Disc Cut-Off Saws |
| General purpose abrasive saw suitable for site use. Supplied with abrasive disc suitable for metal-cutting but will cut concrete with correct blade fitted. MG305 and MG314 are made in Europe to CE regulations and only available in 230Volt. The more competitively priced MG214 is made to CE regulations and imported into the EU. This model being available in 110 and 230Volt versions. |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code MG305/230VCE info) |
| |
| Abrasive Disc Cut-Off Saws |
| General purpose abrasive saw suitable for site use. Supplied with abrasive disc suitable for metal-cutting but will cut concrete with correct blade fitted. MG305 and MG314 are made in Europe to CE regulations and only available in 230Volt. The more competitively priced MG214 is made to CE regulations and imported into the EU. This model being available in 110 and 230Volt versions. |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code MG314/230VCE info) |
| |
| Bandsaw Blade Guards |
| All Sealey bandsaws are fitted with H & SE approved guards. Guards are available for retro fitting to older models and the kit part numbers are listed below. |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM35/CE/G info) |
| |
| Bandsaw Blade Guards |
| All Sealey bandsaws are fitted with H & SE approved guards. Guards are available for retro fitting to older models and the kit part numbers are listed below. |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM5/CE/G info) |
| |
| Bandsaw Blades |
| Flexible bandsaw blades with hardened steel teeth suitable for cutting wood, plastics and thin metal sheet. |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM1214/B/06 info) |
| |
| Bandsaw Blades |
| Flexible bandsaw blades with hardened steel teeth suitable for cutting wood, plastics and thin metal sheet. |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM1214/B/10 info) |
| |
| Bandsaw Blades |
| Flexible bandsaw blades with hardened steel teeth suitable for cutting wood, plastics and thin metal sheet. |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM1214/B/14 info) |
| |
| Bandsaw Blades |
| Flexible bandsaw blades with hardened steel teeth suitable for cutting wood, plastics and thin metal sheet. |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM1214/B/24 info) |
| |
| Bandsaw Blades |
| Flexible bandsaw blades with hardened steel teeth suitable for cutting wood, plastics and thin metal sheet. |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM62/B06 info) |
| |
| Bandsaw Blades |
| Flexible bandsaw blades with hardened steel teeth suitable for cutting wood, plastics and thin metal sheet. |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM62/B10 info) |
| |
| Bandsaw Blades |
| Flexible bandsaw blades with hardened steel teeth suitable for cutting wood, plastics and thin metal sheet. |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM62/B14 info) |
| |
| Bandsaw Blades |
| Flexible bandsaw blades with hardened steel teeth suitable for cutting wood, plastics and thin metal sheet. |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM62/B24 info) |
| |
| Bandsaw Blades |
| Flexible bandsaw blades with hardened steel teeth suitable for cutting wood, plastics and thin metal sheet. |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM63/B06 info) |
| |
| Bandsaw Blades |
| Flexible bandsaw blades with hardened steel teeth suitable for cutting wood, plastics and thin metal sheet. |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM63/B10 info) |
| |
| Bandsaw Blades |
| Flexible bandsaw blades with hardened steel teeth suitable for cutting wood, plastics and thin metal sheet. |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM63/B14 info) |
| |
| Bandsaw Blades |
| Flexible bandsaw blades with hardened steel teeth suitable for cutting wood, plastics and thin metal sheet. |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM63/B24 info) |
| |
| Bandsaw Blades |
| Flexible bandsaw blades with hardened steel teeth suitable for cutting wood, plastics and thin metal sheet. |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM64/B06 info) |
| |
| Bandsaw Blades |
| Flexible bandsaw blades with hardened steel teeth suitable for cutting wood, plastics and thin metal sheet. |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM64/B10 info) |
| |
| Bandsaw Blades |
| Flexible bandsaw blades with hardened steel teeth suitable for cutting wood, plastics and thin metal sheet. |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM64/B14 info) |
| |
| Bandsaw Blades |
| Flexible bandsaw blades with hardened steel teeth suitable for cutting wood, plastics and thin metal sheet. |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM64/B24 info) |
| |
| Blade 225x2x32mm 80T 9mm Tooth Pitch |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM225/B80 info) |
| |
| Blade 225x2x32mm 140T 5mm Tooth Pitch |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM225/B140 info) |
| |
| Blade 225x2x32mm 220T 3mm Tooth Pitch |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM225/B220 info) |
| |
| Blade 250 x 2 x 32mm 100T 8mm Tooth Pitch |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM250/B100 info) |
| |
| Blade 250 x 2 x 32mm 160T 5mm Tooth Pitch |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM250/B160 info) |
| |
| Blade 250 x 2 x 32mm 250T 3mm Tooth Pitch |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM250/B250 info) |
| |
| Blade 250 x 2 x 32mm 80T 10mm Tooth Pitch |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM250/B80 info) |
| |
| Blade 275 x 2 x 32mm 120T 7mm Tooth Pitch |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM275/B120 info) |
| |
| Blade 275 x 2 x 32mm 180T 5mm Tooth Pitch |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM275/B180 info) |
| |
| Blade 275 x 2 x 32mm 280T 3mm Tooth Pitch |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM275/B280 info) |
| |
| Blade 275 x 2 x 32mm 90T 10mm Tooth Pitch |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM275/B90 info) |
| |
| Blade 300x2.5x32mm 120T 8mm Tooth Pitch |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM300/B120 info) |
| |
| Blade 300x2.5x32mm 160T 6mm Tooth Pitch |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM300/B160 info) |
| |
| Blade 300x2.5x32mm 180T 5mm Tooth Pitch |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM300/B180 info) |
| |
| Blade 300x2.5x32mm 220T 4mm Tooth Pitch |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM300/B220 info) |
| |
| Compound Mitre Saw 205mm |
| Lightweight portable saw with composite base, aluminium chassis and polished aluminium table. Trigger control with safety catch provides added user safety. Blade is fully guarded and includes O38mm dust extraction port. Saw arm features 45ø swing and 45ø tilt for cutting compound mitres. Supplied with mini-tipped saw blade. Saw arm latches closed for easy storage and transport. |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM8 info) |
| |
| Compound Mitre Saw 250mm |
| Lightweight portable saw with aluminium base and chassis and polished aluminium table. Includes table extension wings and work clamp. Trigger control with guard safety catch provides added user safety. Blade is fully guarded and includes O48mm dust extraction port with removable dust-bag. Saw arm features 45ø swing and 45ø tilt for cutting compound mitres. Supplied with mini-tipped saw blade. Saw arm latches closed for easy storage and transport. |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM10 info) |
| |
| Contractors Saw 12 inch 230V |
| Fully approved to CE regulations this 300mm contractors saw is full of features and ideal for the serious enthusiast and professional workshop. Fitted with no-volt release safety switch, extended outfeed table and dust extraction. Full blade tilt up to 45 |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code TS12CZ info) |
| |
| Cut Off Machine 14 inch 110V Portable |
| General purpose abrasive saw suitable for site use. Supplied with abrasive disc suitable for metal-cutting but will cut concrete with correct blade fitted. These models being available in 110 and 230Volt versions. |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code MG314/110V info) |
| |
| Cut Off Machine 14 inch 230V Portable |
| General purpose abrasive saw suitable for site use. Supplied with abrasive disc suitable for metal-cutting but will cut concrete with correct blade fitted. These models being available in 110 and 230Volt versions. |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code MG314/230V info) |
| |
| Cut-Off Saw Pedestals |
| See below for our range of workshop pedestals. |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM250/ST info) |
| |
| Cut-Off Saw Pedestals |
| See below for our range of workshop pedestals. |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM275/ST info) |
| |
| Cut-Off Saw Pedestals |
| See below for our range of workshop pedestals. |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM300/ST info) |
| |
| Extension Wing for TS1098 |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code TS1098/EW info) |
| |
| Extension Wing Set for TS10CZ |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code TS10CZ/EWS info) |
| |
| Floor Stand for TS1098 |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code TS1098/ST info) |
| |
| Floor Stand for TS10CZ |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code TS10CZ/ST info) |
| |
| Industrial Cut-Off Saws |
| Manufactured to meet latest safety regulations. Heavy cast iron base with swivel head and independent swivel vice allow cutting angles of 45ø (90ø on SM300). Heavy-duty induction motor with 2 stage safety switching and no-volt release circuitry prevents inadvertent re-start after power interruption. Fitted with 24Volt safety switching circuit to reduce risk of electric shock. SM225 is small enough to be transported yet offers versatile cutting capacity on most metals. Supplied without blade. |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM225 info) |
| |
| Industrial Cut-Off Saws |
| Manufactured to meet latest safety regulations. Heavy cast iron base with swivel head and independent swivel vice allow cutting angles of 45ø (90ø on SM300). Heavy-duty induction motor with 2 stage safety switching and no-volt release circuitry prevents inadvertent re-start after power interruption. Fitted with 24Volt safety switching circuit to reduce risk of electric shock. SM225 is small enough to be transported yet offers versatile cutting capacity on most metals. Supplied without blade. |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM250 info) |
| |
| Industrial Cut-Off Saws |
| Manufactured to meet latest safety regulations. Heavy cast iron base with swivel head and independent swivel vice allow cutting angles of 45ø (90ø on SM300). Heavy-duty induction motor with 2 stage safety switching and no-volt release circuitry prevents inadvertent re-start after power interruption. Fitted with 24Volt safety switching circuit to reduce risk of electric shock. SM225 is small enough to be transported yet offers versatile cutting capacity on most metals. Supplied without blade. |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM275 info) |
| |
| Industrial Cut-Off Saws |
| Manufactured to meet latest safety regulations. Heavy cast iron base with swivel head and independent swivel vice allow cutting angles of 45ø (90ø on SM300). Heavy-duty induction motor with 2 stage safety switching and no-volt release circuitry prevents inadvertent re-start after power interruption. Fitted with 24Volt safety switching circuit to reduce risk of electric shock. SM225 is small enough to be transported yet offers versatile cutting capacity on most metals. Supplied without blade. |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM300 info) |
| |
| Industrial Power Bandsaws |
| Manufactured to comply with Supply of Machinery (Safety) Regulations 1992 (S.I.3073) and fully CE approved. All saw arms are fitted with hydraulic damping to prevent the arm being dropped onto the workpiece and to ensure smooth cutting performance. Coolant fluid system and main power controls are switched on 24 volt circuits for extra safety. Heavy duty single phase electric motors with over-current sensor on all models to cut power in the event of blade jam. |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM353CE info) |
| |
| Industrial Power Bandsaws |
| Manufactured to comply with Supply of Machinery (Safety) Regulations 1992 (S.I.3073) and fully CE approved. All saw arms are fitted with hydraulic damping to prevent the arm being dropped onto the workpiece and to ensure smooth cutting performance. Coolant fluid system and main power controls are switched on 24V/230V combined circuits for extra safety. Heavy duty single phase electric motors with over-current sensor on all models to cut power in the event of blade jam. |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM35CE info) |
| |
| Metal Cutting Bandsaw 3 Speed with Stand |
| Compact size and powerful motor make this unit suitable for the mobile workshop. Features swivel arm facility for added versatility. Provided with anti-vibration feet for mounting on bench or supplied workshop stand. |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM4 info) |
| |
| Power Bandsaw 150mm Horizontal/Vertical |
| Heavy duty cast base and horizontal/vertical cutting arm. Saw base features integral mitring vice with scale of 90ø to 45ø for angle cutting and fully adjustable precision blade guides for accurate cutting and longer blade life. Stand is fitted with 2 transport wheels, for portability in the workshop. |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM5 info) |
| |
| Power Bandsaw 150mm with Swivel Arm |
| Features swivel arm facility to aid angle cutting of long pieces of stock in confined workshop. Supplied with quick action vice - push the jaw up to the workpiece and then pull the cam action lever to lock. Fully adjustable precision blade guides for accurate cutting and longer blade life. Supplied with anti-vibration feet for bench mounting and workshop stand. |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM65 info) |
| |
| Power Bandsaw 200mm with Swivel Arm |
| Features swivel arm facility to aid angle cutting of long pieces of stock in confined workshop. Supplied with quick action vice - push the jaw up to the workpiece and then pull the cam action lever to lock. Supplied with anti-vibration feet for bench mounting. Illustrated with optional floor stand Model No. SM658/ST. |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM658 info) |
| |
| Power Bandsaw 8 inch with Swivel/Hydraulic Arm |
| Features hydraulic arm to enable smooth and clean cutting of thin-walled pipe and box section. Swivel arm facility aids angle cutting of long pieces of stock in confined workshop. Includes integral quick action vice. Supplied with anti-vibration feet for bench mounting. Illustrated with optional floor stand SM658/ST |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM6582 info) |
| |
| Power Bandsaw Blades |
| HSS bandsaw blades with hardened cutting edges. Suitable for cutting steel, aluminium, brass, copper and plastics. Note: Substitute blade pitch at the end of model number, i.e. SM35.B/14 is 14tpi blade for SM35CE |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM35/B04 info) |
| |
| Power Bandsaw Blades |
| HSS bandsaw blades with hardened cutting edges. Suitable for cutting steel, aluminium, brass, copper and plastics. Note: Substitute blade pitch at the end of model number, i.e. SM35.B/14 is 14tpi blade for SM35CE |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM35/B08 info) |
| |
| Power Bandsaw Blades |
| HSS bandsaw blades with hardened cutting edges. Suitable for cutting steel, aluminium, brass, copper and plastics. Note: Substitute blade pitch at the end of model number, i.e. SM35.B/14 is 14tpi blade for SM35CE |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM35/B14 info) |
| |
| Power Bandsaw Blades |
| HSS bandsaw blades with hardened cutting edges. Suitable for cutting steel, aluminium, brass, copper and plastics. Note: Substitute blade pitch at the end of model number, i.e. SM35.B/14 is 14tpi blade for SM35CE |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM35/B18 info) |
| |
| Power Bandsaw Blades |
| HSS bandsaw blades with hardened cutting edges. Suitable for cutting steel, aluminium, brass, copper and plastics. Note: Substitute blade pitch at the end of model number, i.e. SM35.B/14 is 14tpi blade for SM35CE |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM35/B24 info) |
| |
| Power Bandsaw Blades |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM353CE/085 info) |
| |
| Power Bandsaw Blades |
| HSS bandsaw blades with hardened cutting edges. Suitable for cutting steel, aluminium, brass, copper and plastics. Note: Substitute blade pitch at the end of model number, i.e. SM35.B/14 is 14tpi blade for SM35CE |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM353CE/B04 info) |
| |
| Power Bandsaw Blades |
| HSS bandsaw blades with hardened cutting edges. Suitable for cutting steel, aluminium, brass, copper and plastics. Note: Substitute blade pitch at the end of model number, i.e. SM35.B/14 is 14tpi blade for SM35CE |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM353CE/B08 info) |
| |
| Power Bandsaw Blades |
| HSS bandsaw blades with hardened cutting edges. Suitable for cutting steel, aluminium, brass, copper and plastics. Note: Substitute blade pitch at the end of model number, i.e. SM35.B/14 is 14tpi blade for SM35CE |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM353CE/B14 info) |
| |
| Power Bandsaw Blades |
| HSS bandsaw blades with hardened cutting edges. Suitable for cutting steel, aluminium, brass, copper and plastics. |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM4.B14 info) |
| |
| Power Bandsaw Blades |
| HSS bandsaw blades with hardened cutting edges. Suitable for cutting steel, aluminium, brass, copper and plastics. Note: Substitute blade pitch at the end of model number, i.e. SM35.B/14 is 14tpi blade for SM35CE |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM5/113 info) |
| |
| Power Bandsaw Blades |
| HSS bandsaw blades with hardened cutting edges. Suitable for cutting steel, aluminium, brass, copper and plastics. Note: Substitute blade pitch at the end of model number, i.e. SM35.B/14 is 14tpi blade for SM35CE |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM5/113/10 info) |
| |
| Power Bandsaw Blades |
| HSS bandsaw blades with hardened cutting edges. Suitable for cutting steel, aluminium, brass, copper and plastics. Note: Substitute blade pitch at the end of model number, i.e. SM35.B/14 is 14tpi blade for SM35CE |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM5/113/24 info) |
| |
| Power Bandsaw Blades |
| HSS bandsaw blades with hardened cutting edges. Suitable for cutting steel, aluminium, brass, copper and plastics. Note: Substitute blade pitch at the end of model number, i.e. SM35.B/14 is 14tpi blade for SM35CE |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM5/113/6 info) |
| |
| Power Bandsaw Blades |
| HSS bandsaw blades with hardened cutting edges. Suitable for cutting steel, aluminium, brass, copper and plastics. Note: Substitute blade pitch at the end of model number, i.e. SM35.B/14 is 14tpi blade for SM35CE |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM658/B/06 info) |
| |
| Power Bandsaw Blades |
| HSS bandsaw blades with hardened cutting edges. Suitable for cutting steel, aluminium, brass, copper and plastics. Note: Substitute blade pitch at the end of model number, i.e. SM35.B/14 is 14tpi blade for SM35CE |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM658/B/10 info) |
| |
| Power Bandsaw Blades |
| HSS bandsaw blades with hardened cutting edges. Suitable for cutting steel, aluminium, brass, copper and plastics. Note: Substitute blade pitch at the end of model number, i.e. SM35.B/14 is 14tpi blade for SM35CE |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM658/B/14 info) |
| |
| Power Bandsaw Blades |
| HSS bandsaw blades with hardened cutting edges. Suitable for cutting steel, aluminium, brass, copper and plastics. Note: Substitute blade pitch at the end of model number, i.e. SM35.B/14 is 14tpi blade for SM35CE |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM658/B/24 info) |
| |
| Power Hacksaw Blade 16 x 1-1/4 x .062 inch 24tpi |
| Manufactured from HSS stock and supplied individually. |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM18/B24 info) |
| |
| Power Hacksaw Blades |
| Manufactured from HSS stock and supplied individually. Note: Substitute required blade pitch at the end of the model number. i.e. SM16/17/B14 is a 14tpi blade for SM16/1 or SM17/1. |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM16/17/B info) |
| |
| Power Hacksaw Blades |
| Manufactured from HSS stock and supplied individually. Note: Substitute required blade pitch at the end of the model number. i.e. SM16/17/B14 is a 14tpi blade for SM16/1 or SM17/1. |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM16/17/B/10 info) |
| |
| Power Hacksaw Blades |
| Manufactured from HSS stock and supplied individually. Note: Substitute required blade pitch at the end of the model number. i.e. SM16/17/B14 is a 14tpi blade for SM16/1 or SM17/1. |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM16/17/B/18 info) |
| |
| Power Hacksaw Blades |
| Manufactured from HSS stock and supplied individually. |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM18/B info) |
| |
| Power Hacksaws |
| Manufactured to comply with Supply of Machinery (Safety) Regulations 1992 (S.I.3073). Cast base with integral mitring vice and setting bar for repetition cutting. Machined saw arm runners with wear shims for smooth cutting performance. Automatic power cut-off stops machine after completion of cutting. Fitted with heavy duty 230Volt single phase electric motor and an approved 3 pin safety plug. SM17/1 and SM18/1 supplied with a belt driven coolant pump system to lubricate and cool the workpiece. Fully guarded pulley and drive assembly. |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM16/1 info) |
| |
| Power Hacksaws |
| Manufactured to comply with Supply of Machinery (Safety) Regulations 1992 (S.I.3073). Cast base with integral mitring vice and setting bar for repetition cutting. Machined saw arm runners with wear shims for smooth cutting performance. Automatic power cut-off stops machine after completion of cutting. Fitted with heavy duty 230Volt single phase electric motor and an approved 3 pin safety plug. SM17/1 and SM18/1 supplied with a belt driven coolant pump system to lubricate and cool the workpiece. Fully guarded pulley and drive assembly. |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM17/1 info) |
| |
| Power Hacksaws |
| Manufactured to comply with Supply of Machinery (Safety) Regulations 1992 (S.I.3073). Cast base with integral mitring vice and setting bar for repetition cutting. Machined saw arm runners with wear shims for smooth cutting performance. Automatic power cut-off stops machine after completion of cutting. Fitted with heavy duty 230Volt single phase electric motor and an approved 3 pin safety plug. SM17/1 and SM18/1 supplied with a belt driven coolant pump system to lubricate and cool the workpiece. Fully guarded pulley and drive assembly. |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM18/1 info) |
| |
| Scroll Saw |
| Fully CE approved scroll saw suitable for cutting intricate shapes in wood, plastic and thin metal sheet. Fitted with eyeshields/safety guard and dust blower. |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM43 info) |
| |
| Scroll Saw Blades |
| Scroll saw blades with hardened steel teeth suitable for cutting wood, plastics and thin metal sheet. Suitable for all Sealey scroll saws. |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SMSS/B02 info) |
| |
| Scroll Saw Blades |
| Scroll saw blades with hardened steel teeth suitable for cutting wood, plastics and thin metal sheet. Suitable for all Sealey scroll saws. |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SMSS/B05 info) |
| |
| Scroll Saw Blades |
| Scroll saw blades with hardened steel teeth suitable for cutting wood, plastics and thin metal sheet. Suitable for all Sealey scroll saws. |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SMSS/B07 info) |
| |
| Scroll Saw Blades |
| Scroll saw blades with hardened steel teeth suitable for cutting wood, plastics and thin metal sheet. Suitable for all Sealey scroll saws. |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SMSS/B11 info) |
| |
| Stand for SM65 |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM65/ST info) |
| |
| Stand For SM658 |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM658/ST info) |
| |
| Steel Bladed Cut-Off Saw |
| Lightweight, heavy duty cut-off saw suitable for cutting steel and aluminium tube, bar and box section. Supplied with 230mm HSS blade, mitring vice, cut adjuster and coolant pump. Trigger operated, 1100Watt motor with hardened steel worm drive. |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM11 info) |
| |
| Table Saw Hobby 8 inch CE Approved |
| Fully approved to CE regulations this hobby saw offers many of the features of larger machines at an affordable price. Powerful 600Watt motor for accurate cutting up to 42mm at 90ø. |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code HTS8 info) |
| |
| Three-Wheel Bandsaw/Disc Sander |
| Fully approved to current CE regulations. Fitted with powerful induction motor and features ball bearing type blade guides for precision cutting. Fully guarded blade wheels. Includes integral sanding disc and sanding table. Both tables can be adjusted for angled cutting/sanding. Mitre gauge included fits both cutting and sanding tables. No-volt release switch prevents uncontrolled blade re-start after power interruption. Suitable for cutting wood, plastics and thin metal sheet. Supplied fitted with BS approved non-rewirable safety plug. |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM1214 info) |
| |
| Tungsten Carbide Tipped Cut-Off Machine |
| Tungsten steel blade cuts slow and cold, without the need for coolant fluid, and will handle steel, wood, brass, aluminium and most plastics. Powered by a 1900Watt motor and available in either 230 or 110 volt versions. Cast alloy base and saw arm with mitreing vice. Fully guarded and fitted with dead-man trigger control to prevent personal injury. Manufactured to comply with Supply of Machinery (Safety) Regulations 1992 (S.I.3073) and fully CE approved. |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code MG3143 info) |
| |
| Tungsten Carbide Tipped Cut-Off Machine |
| Tungsten steel blade cuts slow and cold, without the need for coolant fluid, and will handle steel, wood, brass, aluminium and most plastics. Powered by a 1900Watt motor and available in either 230 or 110 volt versions. Cast alloy base and saw arm with mitreing vice. Fully guarded and fitted with dead-man trigger control to prevent personal injury. Manufactured to comply with Supply of Machinery (Safety) Regulations 1992 (S.I.3073) and fully CE approved. |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code MG3143/110 info) |
| |
| Two-Wheel Bandsaw 305mm |
| Fully approved to current CE regulations. Aluminium chassis with composite blade wheel cover with blade wheel tracking window for accurate set-up. Includes microswitch power cut-out on blade wheel covers to prevent access while blade is operating. Bearing mounted aluminium blade wheels and belt drive induction motor provides smooth operation. No-volt release switch prevents uncontrolled blade re-start after power interruption. Suitable for cutting wood, plastics and thin metal sheet. Fitted with tilting table for cutting compound mitres. Supplied with mitre gauge. Includes dust extraction port. |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM63 info) |
| |
| Two-Wheel Bandsaw 305mm |
| Fully approved to current CE regulations. Aluminium chassis and blade wheel cover. Includes microswitch power cut-out on blade wheel covers to prevent access while blade is operating. Two speed operation by adjustable drive belt. Powered by smooth running induction motor. Bearing blade guides allow precise cutting set-up and include comprehensive blade guard assemblies. No-volt release switch prevents uncontrolled blade re-start after power interruption. Suitable for cutting wood, plastics and thin metal sheet. Tilting table includes Metric and Imperial rip fence rules. Supplied with mitre gauge and adjustable rip fence. Includes dust extraction port. |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM64 info) |
| |
| Two-Wheeled Bandsaw 190mm |
| Fully approved to current CE regulations. Aluminium chassis with composite blade wheel cover. Access to exposed blade wheels prevented by mechanical catch. Bearing mounted aluminium blade wheels and direct drive induction motor provide smooth operation. No-volt release switch prevents uncontrolled blade re-start after power interruption. Suitable for cutting wood, plastics and thin metal sheet. Fitted with tilting table for cutting compound mitres. Supplied with quick adjusting rip fence and mitre gauge. Includes dust extraction port. |
| CLICK HERE TO BUY AT CCW |
| (Wood Working Code SM62 info) |
| |
