Sealey Hand Tools: Mechanics
|
Shop for Sealey Hand Tools and other garage equipment in the
Classic Wheels online toolstore
You're in the mechanics section of the Classic Wheels toolshop, describing these and other
sealey hand tools available at the Classic Car World (CCW) online store.
CCW are a specialist supplier of workshop and garage tools over the 'net, and listed below are the mechanics
they have for sale in the sealey hand tools area of their catalogue. For their very latest prices please visit their site.
As well as low prices on new mechanics, you can find hundreds of other tools, just check out the left hand
category menu and have a look around at other sealey hand tools they have. They stock all the leading brands, such
as Sealey.
|
| 11 inch Long Nose Plier Set 3pc |
| Manufactured from drop forged, heat treated steel with induction hardened cutting edges. Fully polished finish. Superb for use in areas with limited access. Non-slip foam cushion grip handles. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK530 info) |
| |
| 11 inch Needle Nose Pliers |
| Manufactured from drop forged, heat treated steel with induction hardened cutting edges. Fully polished finish. Superb for use in areas with limited access. Non-slip foam cushion grip handles. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK532 info) |
| |
| 11 inch Needle Nose Pliers |
| Manufactured from drop forged, heat treated steel with induction hardened cutting edges. Fully polished finish. Superb for use in areas with limited access. Non-slip foam cushion grip handles. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK533 info) |
| |
| 11 inch Needle Nose Pliers |
| Manufactured from drop forged, heat treated steel with induction hardened cutting edges. Fully polished finish. Superb for use in areas with limited access. Non-slip foam cushion grip handles. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK534 info) |
| |
| 11 inch Needle Nose Pliers |
| Manufactured from drop forged, heat treated steel with induction hardened cutting edges. Fully polished finish. Superb for use in areas with limited access. Non-slip foam cushion grip handles. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK535 info) |
| |
| 15-in-1 Ratchet Dual Driver with Magnetic Pick-Up |
| Hard wearing Chrome Vanadium steel bits. Combination large and small ratchet mechanism allows use as long or stubby driver. Magnetic bit retainer telescopes out of driver tip doubling as magnetic pick-up. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK4916 info) |
| |
| 20-in-1 Cushion Grip Screwdriver Set |
| Double ended, hardened and tempered, Chrome Vanadium steel shafts with satin chrome finish. Blackened and magnetized tips. Contoured power-grip handle allows superior power transfer. 250mm Overall length. Supplied in permanent storage case. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK3874 info) |
| |
| 3-D 12 inch Hacksaw |
| Unique design made from die-cast aluminium. 4-Position hacksaw frame enables large capacity cutting plus 3 other positions suitable for working in areas where access is tight. Especially suitable for works engineers and plumbers although equally at home in the general workshop environment. Quick action blade release allows blade to be switched without the need for additional tools. Accepts standard 12 inch blades. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK8694 info) |
| |
| 3-Legged Gear Puller Sets |
| Drop forged, high carbon steel reversible legs and body. Heat treated and chrome plated to resist corrosion. Swivel thrust plates on larger sizes prevent damage to shaft ends. Hex head forcing screws suitable for use with ratchet wrench or combination spanner. Available in either 3pc or 4pc sets. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK78 info) |
| |
| 3-Legged Gear Puller Sets |
| Drop forged, high carbon steel reversible legs and body. Heat treated and chrome plated to resist corrosion. Swivel thrust plates on larger sizes prevent damage to shaft ends. Hex head forcing screws suitable for use with ratchet wrench or combination spanner. Available in either 3pc or 4pc sets. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK79 info) |
| |
| 40-in-1 Powermaxr Combination Screwdriver Set 11p |
| Ergonomically fashioned Powermaxr screwdriver grip with quick-release chuck for fast blade interchange. Set features 10 double ended Chrome Vanadium S2 steel driver shafts, hardened and tempered for long life. Shafts can be locked in required length for added versatility. Supplied in folding case. Contents: 170mm Double-Ended Driver Bits; Slotted - 4 x 5.5, 4.5 x 6.5mm, Pozi - #1 x #2, Pozi #3 x Phillips #3, Phillips - #1 x #2, TRX-Star* T10 x T15, T20 x T25, T30 x T40, Hex - 3 x 4, 5 x 6mm, Powermaxr Driver with Quick Chuck. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK4820 info) |
| |
| Adjustable Pipe Wrenches |
| Drop forged, steel body with adjustable anodised jaw. Deeply serrated jaws for extra grip. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK511 info) |
| |
| Adjustable Pipe Wrenches |
| Drop forged, steel body with adjustable anodised jaw. Deeply serrated jaws for extra grip. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK512 info) |
| |
| Adjustable Pipe Wrenches |
| Drop forged, steel body with adjustable anodised jaw. Deeply serrated jaws for extra grip. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK513 info) |
| |
| Adjustable Pipe Wrenches |
| Drop forged, steel body with adjustable anodised jaw. Deeply serrated jaws for extra grip. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK514 info) |
| |
| Adjustable Ratchet Wrenches |
| Chrome Vanadium steel construction with satin handle and polished head. Unique jaw mechanism works with both Metric and Imperial sizes. Simply flip up the setting lever and adjust the jaws onto the corner of the fixing. On return of the lever to its start position, the jaw is minutely adjusted to allow it to ratchet over flats and grip the corners. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6230 info) |
| |
| Adjustable Ratchet Wrenches |
| Chrome Vanadium steel construction with satin handle and polished head. Unique jaw mechanism works with both Metric and Imperial sizes. Simply flip up the setting lever and adjust the jaws onto the corner of the fixing. On return of the lever to its start position, the jaw is minutely adjusted to allow it to ratchet over flats and grip the corners. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6231 info) |
| |
| Adjustable Wrench 150mm WallDrive |
| Drop forged Chrome Vanadium steel. Patented precision jaws, hardened and heat treated to HRC 40ø-50ø for durability and accurate contact with fastener. Feature lightweight, yet strong handle design and anti-slip comfort grip with indicator for correct dir |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK9451 info) |
| |
| Adjustable Wrench 200mm WallDrive |
| Drop forged Chrome Vanadium steel. Patented precision jaws, hardened and heat treated to HRC 40ø-50ø for durability and accurate contact with fastener. Feature lightweight, yet strong handle design and anti-slip comfort grip with indicator for correct dir |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK9452 info) |
| |
| Adjustable Wrench 250mm WallDrive |
| Drop forged Chrome Vanadium steel. Patented precision jaws, hardened and heat treated to HRC 40ø-50ø for durability and accurate contact with fastener. Feature lightweight, yet strong handle design and anti-slip comfort grip with indicator for correct dir |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK9453 info) |
| |
| Adjustable Wrench 300mm WallDrive |
| Drop forged Chrome Vanadium steel. Patented precision jaws, hardened and heat treated to HRC 40ø-50ø for durability and accurate contact with fastener. Feature lightweight, yet strong handle design and anti-slip comfort grip with indicator for correct dir |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK9454 info) |
| |
| Adjustable Wrench 600mm |
| Chrome Vanadium steel adjustable wrenches. Available individually. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK2357 info) |
| |
| Adjustable Wrench Set 3pc |
| Drop forged Chrome Vanadium steel. Hardened and heat treated. Precision ground, fully polished offset jaws for accuracy and black phosphate finish for long term corrosion resistance. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK607 info) |
| |
| Adjustable Wrench Sets |
| Chrome Vanadium steel. Hardened and heat treated with satin chrome finish. Fully polished, offset jaws. Slim raised lip style handle with hanging hole. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK207 info) |
| |
| Adjustable Wrench Sets |
| Chrome Vanadium steel. Hardened and heat treated with satin chrome finish. Fully polished, offset jaws. Slim raised lip style handle with hanging hole. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK235 info) |
| |
| Adjustable Wrenches |
| Chrome Vanadium steel adjustable wrench. Available individually. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK2351 info) |
| |
| Adjustable Wrenches |
| Chrome Vanadium steel adjustable wrench. Available individually. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK2352 info) |
| |
| Adjustable Wrenches |
| Chrome Vanadium steel adjustable wrench. Available individually. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK2353 info) |
| |
| Adjustable Wrenches |
| Chrome Vanadium steel adjustable wrench. Available individually. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK2354 info) |
| |
| Adjustable Wrenches |
| Chrome Vanadium steel adjustable wrench. Available individually. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK2355 info) |
| |
| Adjustable Wrenches |
| Chrome Vanadium steel adjustable wrench. Available individually. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK2356 info) |
| |
| Aluminium Alloy Locking inchC inch Clamps |
| Aircraft alloy arms and jaws help reduce weight and improve handling. Alloy has low affinity for welding spatter and stays cleaner longer. Suitable for body shop and fabrication workshop. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6843 info) |
| |
| Aluminium Alloy Locking inchC inch Clamps |
| Aircraft alloy arms and jaws help reduce weight and improve handling. Alloy has low affinity for welding spatter and stays cleaner longer. Suitable for body shop and fabrication workshop. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6844 info) |
| |
| Aluminium Alloy Locking inchC inch Clamps |
| Aircraft alloy arms and jaws help reduce weight and improve handling. Alloy has low affinity for welding spatter and stays cleaner longer. Suitable for body shop and fabrication workshop. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6845 info) |
| |
| Aluminium Alloy Locking inchC inch Clamps |
| Aircraft alloy arms and jaws help reduce weight and improve handling. Alloy has low affinity for welding spatter and stays cleaner longer. Suitable for body shop and fabrication workshop. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6846 info) |
| |
| Aluminium Alloy Locking inchC inch Clamps |
| Aircraft alloy arms and jaws help reduce weight and improve handling. Alloy has low affinity for welding spatter and stays cleaner longer. Suitable for body shop and fabrication workshop. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6847 info) |
| |
| Aluminium Alloy Locking inchU inch Clamps |
| Aircraft alloy arms and jaws help reduce weight and improve handling. Alloy has low affinity for welding spatter and stays cleaner, longer. Suitable for body shop and fabrication workshop. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6848 info) |
| |
| Aluminium Alloy Pipe Wrenches |
| European pattern pipe wrench. Gravity cast aluminium alloy handle has the strength of steel but at 2/3rds the weight. Drop forged high carbon steel jaws with tool steel spring. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK5106 info) |
| |
| Aluminium Alloy Pipe Wrenches |
| European pattern pipe wrench. Gravity cast aluminium alloy handle has the strength of steel but at 2/3rds the weight. Drop forged high carbon steel jaws with tool steel spring. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK5107 info) |
| |
| Aluminium Alloy Pipe Wrenches |
| European pattern pipe wrench. Gravity cast aluminium alloy handle has the strength of steel but at 2/3rds the weight. Drop forged high carbon steel jaws with tool steel spring. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK5108 info) |
| |
| Aluminium Alloy Pipe Wrenches |
| European pattern pipe wrench. Gravity cast aluminium alloy handle has the strength of steel but at 2/3rds the weight. Drop forged high carbon steel jaws with tool steel spring. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK5109 info) |
| |
| Aluminium Alloy Pipe Wrenches |
| European pattern pipe wrench. Gravity cast aluminium alloy handle has the strength of steel but at 2/3rds the weight. Drop forged high carbon steel jaws with tool steel spring. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK5110 info) |
| |
| Aluminium Alloy Pipe Wrenches |
| European pattern pipe wrench. Gravity cast aluminium alloy handle has the strength of steel but at 2/3rds the weight. Drop forged high carbon steel jaws with tool steel spring. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK5111 info) |
| |
| Angle Head Ratchet Wrench Sets 5pc |
| Chrome Vanadium steel rings, fully hardened and tempered. 12 Point format with rocker type ratchet reverse. Additionally features 30ø offset ratchet head. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK2260 info) |
| |
| Angle Head Ratchet Wrench Sets 5pc |
| Chrome Vanadium steel rings, fully hardened and tempered. 12 Point format with rocker type ratchet reverse. Additionally features 30ø offset ratchet head. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK2270 info) |
| |
| AutoGrip Pliers 175mm |
| Self-adjusting automatic pliers. Laminated steel plate, hardened, tempered and finished to resist corrosion. Straight jaws automatically adjust to size of work piece and are fully adjustable. Jaw pressure is adjustable by turning knurled screw. Vinyl covered handles. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6270 info) |
| |
| AutoGrip Pliers 225mm |
| Self-adjusting automatic pliers. Laminated steel plate, hardened, tempered and finished to resist corrosion. Straight jaws automatically adjust to size of work piece and are fully adjustable. Jaw pressure is adjustable by turning knurled screw. Vinyl covered handles. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6271 info) |
| |
| Automatic Grip Pliers |
| Manufactured from steel plate, hardened and tempered with chemically blackened finish to resist corrosion. Genuine one handed operation - cantilever mechanism permits automatic jaw sizing and grips without the need to re-adjust the slip joint as with traditional water pump pliers. Fitted with comfortable grips. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK625 info) |
| |
| Automatic Grip Pliers |
| Manufactured from steel plate, hardened and tempered with chemically blackened finish to resist corrosion. Genuine one handed operation - cantilever mechanism permits automatic jaw sizing and grips without the need to re-adjust the slip joint as with traditional water pump pliers. Fitted with comfortable grips. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK626 info) |
| |
| Automotive Fuses 120pcs |
| Automotive blade fuse assortment. Partitioned case. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code BCF120 info) |
| |
| Axial Grip Set with Rack |
| Wall or tool chest mountable rack consisting of a full set of locking welding pliers. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6840 info) |
| |
| Ball Ended Hex Key Set 9pc |
| Manufactured from heat treated and hardened Chrome Vanadium steel with matt chrome finish. Ball ends allow key to drive fixing at up to 30ø from the key's central axis. Supplied in sliding case for safe storage and easy key selection. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6136 info) |
| |
| Ball Ended Hex Key Sets 7pc |
| Chrome Vanadium steel keys with ball ended long reach shafts allowing up to 30ø of tilt from centre axis. Suitable for use where access is limited. Supplied in handy carry clip. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK237 info) |
| |
| Ball Ended Hex Key Sets 7pc |
| Chrome Vanadium steel keys with ball ended long reach shafts allowing up to 30ø of tilt from centre axis. Suitable for use where access is limited. Supplied in handy carry clip. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK238 info) |
| |
| Ball Ended Hex Socket & Bit Set 12pc |
| Forged Chrome Vanadium steel drive adaptors with spring ball bit retention. Chrome Molybdenum S2 steel TRX-Star* bits. Sockets heat treated and chrome plated for corrosion resistance. Supplied in case. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6211 info) |
| |
| Ball Pein Hammer Set 3pc |
| Drop forged medium carbon steel head. Genuine hickory shafts. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK203 info) |
| |
| Ball Pein Hammers with Hickory Shaft |
| Drop-forged steel heads manufactured and tested to BS876. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code BPH08 info) |
| |
| Ball Pein Hammers with Hickory Shaft |
| Drop-forged steel heads manufactured and tested to BS876. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code BPH12 info) |
| |
| Ball Pein Hammers with Hickory Shaft |
| Drop-forged steel heads manufactured and tested to BS876. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code BPH16 info) |
| |
| Ball Pein Hammers with Hickory Shaft |
| Drop-forged steel heads manufactured and tested to BS876. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code BPH24 info) |
| |
| Ball Pein Hammers with Hickory Shaft |
| Drop-forged steel heads manufactured and tested to BS876. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code BPH32 info) |
| |
| Ball-Ended Hex Key Socket Sets 7pc |
| Forged Chrome Vanadium steel sockets with Chrome Molybdenum S2 steel hex bits. Sockets heat treated and chrome plated for resistance to corrosion. Ball-ended bits allow fixings to be driven with the hex shaft up to 30ø off centre axis. Satin finish with knurled ring to assist gripping socket with greasy fingers. Supplied with socket rail for wall or tool chest mounting. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK621 info) |
| |
| Ball-Ended Hex Key Socket Sets 7pc |
| Forged Chrome Vanadium steel sockets with Chrome Molybdenum S2 steel hex bits. Sockets heat treated and chrome plated for resistance to corrosion. Ball-ended bits allow fixings to be driven with the hex shaft up to 30ø off centre axis. Satin finish with knurled ring to assist gripping socket with greasy fingers. Supplied with socket rail for wall or tool chest mounting. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6212 info) |
| |
| Ball-Ended Hex Key Socket Sets 7pc |
| Forged Chrome Vanadium steel sockets with Chrome Molybdenum S2 steel hex bits. Sockets heat treated and chrome plated for resistance to corrosion. Ball-ended bits allow fixings to be driven with the hex shaft up to 30ø off centre axis. Satin finish with knurled ring to assist gripping socket with greasy fingers. Supplied with socket rail for wall or tool chest mounting. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK622 info) |
| |
| Ball-Ended Hex Key Wrench Set with Power Bar 10pc |
| Keys manufactured from hardened and tempered Chrome Vanadium steel with matt chrome finish. Ball ends allow key to drive fixing at up to 30ø from the key's central axis. Set includes double ended power bar to aid comfort whilst driving stubborn fixings. Supplied with storage clip. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6145 info) |
| |
| Ball-Ended Hex Screwdriver Set 10pc |
| Chrome Vanadium steel shafts with slim grip handles. Ball end tips chemically blackened and shafts satin finished for corrosion resistance. Ball ended tips give up to 15ø lateral movement from centre axis making them ideal for use in confined spaces. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6146 info) |
| |
| Ball-Ended Long Reach Hex Key Set 6pc |
| Hardened and tempered Chrome Vanadium steel shafts. Tough, composite comfort grip handle with hanging hole allows extra torque to be applied to the fixing. Long shaft includes ball-ended tip allowing fixing to be driven at up to 30ø from the key's central axis. Short element finished with standard hex key. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6141 info) |
| |
| Bearing Separator |
| Drop forged steel bearing separator with black finish. Suitable for bearing sizes from O7mm through to O75mm. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK388 info) |
| |
| Bearing Separator & Gear Puller Set 12pc |
| Drop forged bearing separator yoke and 4 inch twin puller arms. Chemically blackened for corrosion resistance. Supplied in blow moulded case. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK389 info) |
| |
| Bit & Driver Set 21pc |
| Chrome Molybdenum S2 Steel with gold finish. Includes magnetic bit holder wrench. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK5589 info) |
| |
| Bit & Magnetic Adaptor Set 33pc |
| Chrome Molybdenum steel driver and bit set. Includes magnetic bit holder with 6mm Hex shank. Suitable for use with power tools and supplied in rubber storage case. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK110 info) |
| |
| Black Headed Rubber Mallets |
| General purpose mallet. Gives a gentle but firm blow with little rebound. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code RMB125 info) |
| |
| Black Headed Rubber Mallets |
| General purpose mallet. Gives a gentle but firm blow with little rebound. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code RMB175 info) |
| |
| Black Headed Rubber Mallets |
| General purpose mallet. Gives a gentle but firm blow with little rebound. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code RMB250 info) |
| |
| Bolt Croppers |
| GS/TUV Approved. Chrome Vanadium steel jaws with tubular steel handles and comfortable rubber grips. Suitable for materials up to HRC-45ø in hardness. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK507 info) |
| |
| Bolt Croppers |
| GS/TUV Approved. Chrome Vanadium steel jaws with tubular steel handles and comfortable rubber grips. Suitable for materials up to HRC-45ø in hardness. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK508 info) |
| |
| Bolt Croppers |
| GS/TUV Approved. Chrome Vanadium steel jaws with tubular steel handles and comfortable rubber grips. Suitable for materials up to HRC-45ø in hardness. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK509 info) |
| |
| Box Wrench Set 10pc |
| Hardened and tempered steel box wrenches. Chemically blackened for corrosion resistance. 8 Double-ended tube wrenches cover 16 sizes. Set includes 2 tommy bars and is supplied in tool roll. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK613 info) |
| |
| Brass Earth Clamp Kit for AK6817 |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6817B info) |
| |
| Breaker Bars |
| Hardened and tempered Chrome Vanadium steel bars with high chrome finish. Knurled handles with spring loaded socket retention. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK674 info) |
| |
| Breaker Bars |
| Hardened and tempered Chrome Vanadium steel bars with high chrome finish. Knurled handles with spring loaded socket retention. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK675 info) |
| |
| Cable Cutter 230mm for Medium Hard Wire |
| Double induction hardened jaws for cutting copper and aluminium cables. Integrated spring release jaw with one hand locking design. Fully polished head with low-slip chunky grip handles. Approved to GS/TUV and DIN Standards. (Not for steel wires). |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK8359 info) |
| |
| Cam Action Wrench |
| Laminated steel construction for strength and rigidity. Cam action head fits all bolt sizes from 10mm to 18mm (including Imperial equivalents). Rotate the wrench one way and the cam slides over the hex fixing, pull the other way and the cam grips. Includes finger tip jaw opening lever. Fitted with foam grip for extra comfort and control. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK2168 info) |
| |
| Cast Steel Pipe Wrenches |
| Shell moulded cast steel handle with high quality drop forged carbon steel jaws. One piece head design for added strength. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK5101 info) |
| |
| Cast Steel Pipe Wrenches |
| Shell moulded cast steel handle with high quality drop forged carbon steel jaws. One piece head design for added strength. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK5102 info) |
| |
| Cast Steel Pipe Wrenches |
| Shell moulded cast steel handle with high quality drop forged carbon steel jaws. One piece head design for added strength. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK5103 info) |
| |
| Cast Steel Pipe Wrenches |
| Shell moulded cast steel handle with high quality drop forged carbon steel jaws. One piece head design for added strength. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK5104 info) |
| |
| Cast Steel Pipe Wrenches |
| Shell moulded cast steel handle with high quality drop forged carbon steel jaws. One piece head design for added strength. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK5105 info) |
| |
| Cast Steel Pipe Wrenches |
| Shell moulded cast steel handle with high quality drop forged carbon steel jaws. One piece head design for added strength. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK5112 info) |
| |
| Cast Steel Pipe Wrenches |
| Shell moulded cast steel handle with high quality drop forged carbon steel jaws. One piece head design for added strength. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK5113 info) |
| |
| Chipboard Screws 250pcs |
| Countersunk Pozidriver yellow zinc plated screw assortment. Partitioned cantilever case. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code BCB250 info) |
| |
| Circlip Assortment 285pcs |
| Internal and external circlip assortment. Partitioned case. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code BC285 info) |
| |
| Circlip Plier Set 4pc |
| Spring loaded jaw sets manufactured from hardened and tempered steel. Pliers are fully polished and fitted with non-slip polyfoam grips. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK8440 info) |
| |
| Circlip Plier Set Internal/External 10pc |
| Heat-treated Chrome Molybdenum steel construction with blackened finish for strength and resistance to corrosion. All circlip pliers feature reversible joints enabling use for either external or internal circlips. Fitted with comfortable vinyl grips. Set includes 2pcs of 125mm picks for hard to reach or dropped clips. Supplied in carry-case. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK20510 info) |
| |
| Combination Internal/ External Circlip Plier Set |
| Hardened and tempered interchangeable steel jaws. Quick release mechanism allows six different internal/external applications. PVC insulated handles with spring loading. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK205 info) |
| |
| Combination Pliers |
| Manufactured from drop forged heat treated steel with induction hardened cutting edges. Fully polished finish with non-slip foam cushion grip handles. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK542 info) |
| |
| Combination Pliers |
| Manufactured from drop forged heat treated steel with induction hardened cutting edges. Fully polished finish with non-slip foam cushion grip handles. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK543 info) |
| |
| Combination Pliers |
| Manufactured from drop forged heat treated steel with induction hardened cutting edges. Fully polished finish with non-slip foam cushion grip handles. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK544 info) |
| |
| Combination Pliers DIN 5744/ISO 5746 |
| Manufactured from tool steel with extra-long induction hardened cutters. Wire cutting capacity O1.6mm according to DIN/ISO 5744. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK8302 info) |
| |
| Combination Pliers DIN 5744/ISO 5746 |
| Manufactured from tool steel with extra-long induction hardened cutters. Wire cutting capacity O1.6mm according to DIN/ISO 5744. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK8304 info) |
| |
| Combination Pliers DIN 5744/ISO 5746 |
| Manufactured from tool steel with extra-long induction hardened cutters. Wire cutting capacity O1.6mm according to DIN/ISO 5744. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK8322 info) |
| |
| Combination Pliers DIN 5744/ISO 5746 |
| Manufactured from tool steel with extra-long induction hardened cutters. Wire cutting capacity O1.6mm according to DIN/ISO 5744. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK8324 info) |
| |
| Combination Ratchet Wrench Set 12pc 8 - 19mm |
| Chrome Vanadium steel combination ratchet wrenches with 72-tooth, WallDriver, ratchet ring, giving ultra smooth ratchet action requiring only 5ø rotation to pick up the next ratchet tooth. Ideal for awkward applications. Available as a set of 12 wrenches |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK63912 info) |
| |
| Combination Wobble/Rigid Extension Bar Sets |
| Forged Chrome Vanadium steel shafts, heat treated and chrome plated with mirror finish. Dual feature allows off-centre driving of sockets at up to 10ø from centre axis or the socket can be locked into 0ø offset. Supplied in tool tray. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK769 info) |
| |
| Combination Wobble/Rigid Extension Bar Sets |
| Forged Chrome Vanadium steel shafts, heat treated and chrome plated with mirror finish. Dual feature allows off-centre driving of sockets at up to 10ø from centre axis or the socket can be locked into 0ø offset. Supplied in tool tray. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK770 info) |
| |
| Comfort Grip Ratchet Wrenches |
| Composite wrench body with hardened steel ratchet mechanism. Includes flip reverse and socket quick-release mechanism. Large comfort-grip handle with hanging point. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK700 info) |
| |
| Comfort Grip Ratchet Wrenches |
| Composite wrench body with hardened steel ratchet mechanism. Includes flip reverse and socket quick-release mechanism. Large comfort-grip handle with hanging point. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK701 info) |
| |
| Comfort Grip Ratchet Wrenches |
| Composite wrench body with hardened steel ratchet mechanism. Includes flip reverse and socket quick-release mechanism. Large comfort-grip handle with hanging point. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK702 info) |
| |
| Copper & Rawhide Faced Hammers |
| Malleable iron head fitted with one face of pure electrolytic copper and one face of compressed buffalo hide. Spare faces available. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code CRF15 info) |
| |
| Copper & Rawhide Faced Hammers |
| Malleable iron head fitted with one face of pure electrolytic copper and one face of compressed buffalo hide. Spare faces available. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code CRF25 info) |
| |
| Copper Faced Hammers |
| Malleable iron head of extra heavy construction fitted with two pure electrolytic copper faces. Replaceable copper faces available. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code CFH02 info) |
| |
| Copper Faced Hammers |
| Malleable iron head of extra heavy construction fitted with two pure electrolytic copper faces. Replaceable copper faces available. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code CFH03 info) |
| |
| Cotter Pins 555pcs |
| Cotter pin assortment. Partitioned case. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code BCP555 info) |
| |
| Crows Foot Wrench Set 3/8 inch Sq Drive |
| Chrome Vanadium steel jaws with 3/8 inch square drives suitable for limited access applications. Heat treated and hardened with chrome finish. Supplied on clip-rail. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK599 info) |
| |
| Crows Foot Wrench Sets 3/8 inch Sq Drive |
| Chrome Vanadium steel jaws with 3/8 inch square drives suitable for limited access applications. Heat treated and hardened with chrome finish. Supplied on clip-rail. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK598 info) |
| |
| Curved Jaw Locking Pliers |
| Particularly suitable for plumbing and heating work. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6820 info) |
| |
| Curved Jaw Locking Pliers |
| Particularly suitable for plumbing and heating work. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6821 info) |
| |
| Cushion Grip Screwdriver Set 21pc |
| Hardened and tempered Chrome Vanadium steel shafts with satin chrome finish. Blackened and magnetized tips. Contoured power-grip handles allow superior power transfer from hand to fixing. Includes bit holder and 14 driver bits. Supplied in permanent storage case. Contents: Slotted; 6 x 100, 8 x 150mm, Phillips; #1 x 75, #2 x 100mm, Pozi; #1 x 75, #2 x 75mm, Bit Holder, Bits; Hex Bits - 2, 2.5, 3, 4, 5, 5.5, 6mm, Slotted - 4, 5mm, Pozi - #3, Phillips - #3, TRX-Star* - T15, T20, T25. Colour coded handles - Red = Slotted, Blue = Phillips, Green = Pozi, Grey = Bit Driver. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK3873 info) |
| |
| Cushion Grip Screwdriver Set 30pc |
| Hardened and tempered Chrome Vanadium steel shafts with satin chrome finish. Blackened and magnetized tips. Contoured power-grip handles for superior power transfer. Includes bit holder and 14 driver bits, 7 precision drivers with Chrome Molybdenum shafts and 195mm flexible drive extension. Supplied in tough permanent storage case. Contents: Slotted; 4 x 75, 5 x 75 (Insulated), 6 x 100, 8 x 150mm, Phillips; #1 x 75, #1 x 75 (Insulated), #2 x 100mm, Bit Holder, Bits; Hex Bits - 3, 4, 5, 5.5, 6mm, Slotted - 5, 6mm, Phillips - #1, #2, TRX-Star* - T10, T25, T27, T30, T40, Precision Drivers; Phillips - #00 x 50, #0 x 50mm, Slotted - 2 x 50, 2.5 x 50, 3 x 50mm, TRX-Star* - T15 x 50, T20 x 50mm, Flexible Extension 195mm. Colour coded handles - Red = Slotted, Blue = Phillips, Green = Pozi, Grey = Bit Driver. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK3861 info) |
| |
| Cushion Grip Screwdriver Set 7pc |
| Hardened and tempered Chrome Vanadium steel shafts with satin chrome finish. Blackened and magnetized tips. Contoured power-grip handles allow superior power transfer from hand to fixing. Colour coded handles. Supplied in permanent storage case. Contents: Slotted; 4 x 75, 5 x 75, 6 x 100, 8 x 150mm, Phillips; #0 x 75, #1 x 75, #2 x 100mm. Colour coded handles - Red = Slotted, Blue = Phillips |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK3871 info) |
| |
| Cutter Wheel for AK5060 Pack of 2 |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK5060/B info) |
| |
| Cutter Wheel for AK5062 Pack of 2 |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK5062/B info) |
| |
| Deep Drive Socket Sets |
| 6 Point Chrome Vanadium steel deep sockets. Hardened and tempered for extra durability. High chrome finish. Each set supplied with socket rail for wall mounting or cabinet fixing. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK281 info) |
| |
| Deep Drive Socket Sets |
| 6 Point Chrome Vanadium steel deep sockets. Hardened and tempered for extra durability. High chrome finish. Each set supplied with socket rail for wall mounting or cabinet fixing. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK284 info) |
| |
| Deep Drive Socket Sets |
| 6 Point Chrome Vanadium steel deep sockets. Hardened and tempered for extra durability. High chrome finish. Each set supplied with socket rail for wall mounting or cabinet fixing. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK287 info) |
| |
| DeLuxe Stubby Combination Wrench Set 10pc - Metric |
| Drop forged Chrome Vanadium steel wrenches. Hardened, tempered and chrome plated for corrosion resistance. Fully polished and mirror finished. WallDriver combination rings. Stubby configuration gives improved access in confined spaces. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK633 info) |
| |
| DeLuxe Stubby Combination Wrench Set 7pc - Imperia |
| Drop forged Chrome Vanadium steel wrenches. Hardened, tempered and chrome plated for corrosion resistance. Fully polished and mirror finished. WallDriver combination rings. Stubby configuration gives improved access in confined spaces. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK633/AF info) |
| |
| DeLuxe WallDriver Combination Wrench Set 11pc - Im |
| Supplied with display/storage wall rack. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK630AF info) |
| |
| DeLuxe WallDriver Combination Wrench Set 11pc - Me |
| Supplied with display/storage wall rack. Available with either laser etched or stamped identification markings. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK630 info) |
| |
| DeLuxe WallDriver Combination Wrench Set 11pc - Me |
| Supplied with display/storage wall rack. Available with either laser etched or stamped identification markings. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK630/S info) |
| |
| DeLuxe WallDriver Combination Wrench Set 14pc - Me |
| Supplied in pouch. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6320 info) |
| |
| DeLuxe WallDriver Combination Wrench Set 6pc - Me |
| Supplied with display/storage wall rack. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK632 info) |
| |
| DeLuxe WallDriver Combination Wrench Set 9pc - Met |
| Supplied with display/storage wall rack. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK631 info) |
| |
| DeLuxe WallDriver Combination Wrenches - Metric |
| Our high quality Premier WallDriver combination wrenches are available individually from your local distributor. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code CW06 info) |
| |
| DeLuxe WallDriver Combination Wrenches - Metric |
| Our high quality Premier WallDriver combination wrenches are available individually from your local distributor. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code CW07 info) |
| |
| DeLuxe WallDriver Combination Wrenches - Metric |
| Our high quality Premier WallDriver combination wrenches are available individually from your local distributor. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code CW08 info) |
| |
| DeLuxe WallDriver Combination Wrenches - Metric |
| Our high quality Premier WallDriver combination wrenches are available individually from your local distributor. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code CW09 info) |
| |
| DeLuxe WallDriver Combination Wrenches - Metric |
| Our high quality Premier WallDriver combination wrenches are available individually from your local distributor. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code CW10 info) |
| |
| DeLuxe WallDriver Combination Wrenches - Metric |
| Our high quality Premier WallDriver combination wrenches are available individually from your local distributor. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code CW11 info) |
| |
| DeLuxe WallDriver Combination Wrenches - Metric |
| Our high quality Premier WallDriver combination wrenches are available individually from your local distributor. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code CW12 info) |
| |
| DeLuxe WallDriver Combination Wrenches - Metric |
| Our high quality Premier WallDriver combination wrenches are available individually from your local distributor. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code CW13 info) |
| |
| DeLuxe WallDriver Combination Wrenches - Metric |
| Our high quality Premier WallDriver combination wrenches are available individually from your local distributor. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code CW14 info) |
| |
| DeLuxe WallDriver Combination Wrenches - Metric |
| Our high quality Premier WallDriver combination wrenches are available individually from your local distributor. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code CW15 info) |
| |
| DeLuxe WallDriver Combination Wrenches - Metric |
| Our high quality Premier WallDriver combination wrenches are available individually from your local distributor. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code CW16 info) |
| |
| DeLuxe WallDriver Combination Wrenches - Metric |
| Our high quality Premier WallDriver combination wrenches are available individually from your local distributor. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code CW17 info) |
| |
| DeLuxe WallDriver Combination Wrenches - Metric |
| Our high quality Premier WallDriver combination wrenches are available individually from your local distributor. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code CW18 info) |
| |
| DeLuxe WallDriver Combination Wrenches - Metric |
| Our high quality Premier WallDriver combination wrenches are available individually from your local distributor. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code CW19 info) |
| |
| DeLuxe WallDriver Combination Wrenches - Metric |
| Our high quality Premier WallDriver combination wrenches are available individually from your local distributor. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code CW20 info) |
| |
| DeLuxe WallDriver Combination Wrenches - Metric |
| Our high quality Premier WallDriver combination wrenches are available individually from your local distributor. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code CW21 info) |
| |
| DeLuxe WallDriver Combination Wrenches - Metric |
| Our high quality Premier WallDriver combination wrenches are available individually from your local distributor. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code CW22 info) |
| |
| DeLuxe WallDriver Combination Wrenches - Metric |
| Our high quality Premier WallDriver combination wrenches are available individually from your local distributor. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code CW23 info) |
| |
| DeLuxe WallDriver Combination Wrenches - Metric |
| Our high quality Premier WallDriver combination wrenches are available individually from your local distributor. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code CW24 info) |
| |
| DeLuxe WallDriver Combination Wrenches - Metric |
| Our high quality Premier WallDriver combination wrenches are available individually from your local distributor. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code CW27 info) |
| |
| DeLuxe WallDriver Combination Wrenches - Metric |
| Our high quality Premier WallDriver combination wrenches are available individually from your local distributor. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code CW30 info) |
| |
| DeLuxe WallDriver Combination Wrenches - Metric |
| Our high quality Premier WallDriver combination wrenches are available individually from your local distributor. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code CW32 info) |
| |
| Diagonal Cutting Nipper |
| Manufactured from drop forged heat treated steel with induction hardened cutting edges. Fully polished finish with non-slip foam cushion grip handles. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK536 info) |
| |
| Diagonal Cutting Nipper |
| Manufactured from drop forged heat treated steel with induction hardened cutting edges. Fully polished finish with non-slip foam cushion grip handles. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK537 info) |
| |
| Diagonal Cutting Nipper |
| Manufactured from drop forged heat treated steel with induction hardened cutting edges. Fully polished finish with non-slip foam cushion grip handles. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK538 info) |
| |
| Display Stands with Stock |
| distributors are able to stock all sizes from 6mm through to 32mm on an eye-catching display module. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code WRENCH PAC 1 info) |
| |
| Display Stands with Stock |
| distributors are able to stock all sizes from 6mm through to 32mm on an eye-catching display module. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code WRENCH PAC 2 info) |
| |
| Display Stands with Stock |
| distributors are able to stock all sizes from 6mm through to 32mm on an eye-catching display module. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code WRENCH PAC 3 info) |
| |
| Double Ended Half Moon Wrench Set 5pc |
| Drop forged Chrome Vanadium steel wrenches with half-moon profile. Heat treated, chrome plated and fully polished. 12-Point, WallDriver rings. Supplied in case. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6312 info) |
| |
| Double Ratchet Wrench Set 3pc |
| Hardened and tempered Chrome Vanadium steel rings with toggle type ratchet pawls. Double sided rings mean each wrench covers four different metric sizes. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK655 info) |
| |
| Duo-Grip Combination Wrenches |
| Drop forged Chrome Vanadium steel wrenches with reversible feature. Use as adjustable spanner or adjustable pipe wrench. Quick release mechanism allows fast adjustment between sizes. Laser etched size guide on jaws. Fitted with rubber grip. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6855 info) |
| |
| Duo-Grip Combination Wrenches |
| Drop forged Chrome Vanadium steel wrenches with reversible feature. Use as adjustable spanner or adjustable pipe wrench. Quick release mechanism allows fast adjustment between sizes. Laser etched size guide on jaws. Fitted with rubber grip. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6856 info) |
| |
| Easy Change Internal/External Circlip Pliers 150mm |
| Easily adjusted between internal and external circlips. Supplied with set of universal straight jaws. Spring loaded. Fitted with chunky grip PVC handles. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK8448 info) |
| |
| Engineers 12 inch Hacksaw |
| Die-cast handle and stock. Micro adjusting blade tension device allowing rapid blade changes without the need to adjust the tensioning every time. Twin (90ø and 45ø) blade positions and cushion-grip for comfortable and accurate cutting. Compass saw capability. Supplied with quality bi-metal hacksaw blade suitable for cutting a variety of materials. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK8692 info) |
| |
| Engineers File Set 5pc |
| Set of second cut files with comfort-grip handles. Supplied in pouch. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK573 info) |
| |
| E-Ring Tool Kit 4pc |
| Composite handle with interchangeable heads. Suitable for fast removal and installation of E-Rings without damage. Reversible blades hold E-Ring in place for easy installation. Heads chemically treated to resist corrosion. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK3855 info) |
| |
| Extending Articulated Inspection Mirror |
| Chromed metal body with pocket-clip for safe storage. O40mm Inspection mirror mounted on ball swivel joint permitting full 360ø rotation. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK652 info) |
| |
| Extension Bar Sets 5pc |
| Forged Chrome Vanadium steel shafts, heat treated and chrome plated with mirror finish. Deep knurling on shafts allows extra grip for oily fingers when spinning off sockets. Sprung ball socket retainers. Supplied in tool tray. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6331 info) |
| |
| Extension Bar Sets 5pc |
| Forged Chrome Vanadium steel shafts, heat treated and chrome plated with mirror finish. Deep knurling on shafts allows extra grip for oily fingers when spinning off sockets. Sprung ball socket retainers. Supplied in tool tray. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6341 info) |
| |
| Extension Bar Sets 5pc |
| Forged Chrome Vanadium steel shafts, heat treated and chrome plated with mirror finish. Deep knurling on shafts allows extra grip for oily fingers when spinning off sockets. Sprung ball socket retainers. Supplied in tool tray. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6351 info) |
| |
| External/Bent Circlip Pliers |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK8412 info) |
| |
| External/Bent Circlip Pliers |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK8413 info) |
| |
| External/Bent Circlip Pliers |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK8414 info) |
| |
| External/Bent Circlip Pliers |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK8415 info) |
| |
| External/Straight Circlip Pliers |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK8402 info) |
| |
| External/Straight Circlip Pliers |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK8403 info) |
| |
| External/Straight Circlip Pliers |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK8404 info) |
| |
| External/Straight Circlip Pliers |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK8405 info) |
| |
| Extra Long Breaker Bars |
| Hardened and tempered Chrome Vanadium steel bars with high chrome finish. Long, slim style handles with spring loaded socket retention. Fully replaceable knuckle joints*. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK729 info) |
| |
| Extra Long Breaker Bars |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK729/RK info) |
| |
| Extra Long Breaker Bars |
| Hardened and tempered Chrome Vanadium steel bars with high chrome finish. Long, slim style handles with spring loaded socket retention. Fully replaceable knuckle joints*. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK730 info) |
| |
| Extra Long Breaker Bars |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK730/RK info) |
| |
| Extra Long Breaker Bars |
| Hardened and tempered Chrome Vanadium steel bars with high chrome finish. Long, slim style handles with spring loaded socket retention. Fully replaceable knuckle joints*. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK731 info) |
| |
| Extra Long Breaker Bars |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK731/RK info) |
| |
| Extra Long DeLuxe Combination Wrench Set 10pc |
| Drop forged Chrome Molybdenum steel wrenches. Hardened, tempered and chromed with fully polished, mirror finish. Open jaw and WallDriver ring combination with extra long shaft. Supplied in moulded tray. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6310 info) |
| |
| Extra Long DeLuxe Double Ended Ring Wrench Set 6pc |
| Extra long, drop forged, Chrome Vanadium steel, 12 point WallDriver ring wrenches. Hardened, tempered and chromed with fully polished, mirror finish. Covers 11 sizes. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6311 info) |
| |
| Fastener Assortment 1001pcs |
| Complete collection of screws, nuts, cotter-pins, washers and nails. Supplied with wall or bench mounting 25 drawer cabinet. Includes pre-printed, self-adhesive drawer labels. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code BAS1001 info) |
| |
| Female TRX-Star* Socket Sets |
| Forged Chrome Vanadium steel sockets. Heat treated and chrome plated for resistance to corrosion. Satin finished with knurled ring to assist gripping socket with greasy fingers. Supplied with socket rail for wall or tool chest mounting. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK616 info) |
| |
| Female TRX-Star* Socket Sets |
| Forged Chrome Vanadium steel sockets. Heat treated and chrome plated for resistance to corrosion. Satin finished with knurled ring to assist gripping socket with greasy fingers. Supplied with socket rail for wall or tool chest mounting. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK617 info) |
| |
| Female TRX-Star* Socket Sets |
| Forged Chrome Vanadium steel sockets. Heat treated and chrome plated for resistance to corrosion. Satin finished with knurled ring to assist gripping socket with greasy fingers. Supplied with socket rail for wall or tool chest mounting. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK618 info) |
| |
| Fixed Shaft Inspection Mirror |
| Heavy shaft, rubber grip and fully articulated O60mm mirror suitable for use in confined areas. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6502 info) |
| |
| Flag Drive TRX-Star* Key Set 8pc |
| Chrome Vanadium steel keys hardened, tempered and satin finished for corrosion resistance. Flag drive head provides a comfortable grip for 'cracking' fixing and thin toggle for spinning fixing out. Tip sizes marked on flag. Supplied in case. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6149 info) |
| |
| Flare Nut Wrench Set 6pc |
| Drop forged Chrome Vanadium steel wrenches with contoured shafts. Fully hardened, tempered and chrome finished for resistance to corrosion. Flare type spanner jaw suitable for most common sizes of compression joint fittings. 6 Double ended spanners cover 12 sizes. Supplied in a tool roll. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK269 info) |
| |
| Flare Nut Wrench Sets 3pc |
| Drop forged Chrome Vanadium Steel with contoured shafts. Fully hardened, tempered, chrome plated and fully polished for resistance to corrosion. Flare type spanner jaw suitable for most common sizes of compression joint fittings. 3 Spanners cover 6 sizes. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK600 info) |
| |
| Flare Nut Wrench Sets 3pc |
| Drop forged Chrome Vanadium Steel with contoured shafts. Fully hardened, tempered, chrome plated and fully polished for resistance to corrosion. Flare type spanner jaw suitable for most common sizes of compression joint fittings. 3 Spanners cover 6 sizes. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK601 info) |
| |
| Flex Head Socket Set 6pc |
| Chrome Vanadium drop forged steel wrenches with raised panel shafts. Hardened, tempered and chrome plated for strength and corrosion resistance. Fitted with 12 point swivel sockets at both ends for easy access in restricted areas. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK606 info) |
| |
| Flex Head Socket Wrench Set 6pc - Metric |
| Chrome Vanadium drop forged steel wrenches with slim style shafts. Hardened and tempered with a fully polished finish for strength and corrosion resistance. Supplied deluxe storage/carry-case. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK635 info) |
| |
| Flex Head Socket/Open End Wrench Set 6pc |
| Chrome Vanadium drop forged steel wrenches with raised panel shafts. Heat treated and chrome plated. Open jaw and socket with swivel joint for extra versatility. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK609 info) |
| |
| Flexi Light Inspection Tool & Magnetic Pick Up |
| Thin and flexible element with high power bulb for maximum light output. Interchangeable tips include fully articulated inspection mirror and illuminated magnetic pick-up. Supplied with sliding cover which doubles as extension handle for extra long reach. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6501 info) |
| |
| Flexi Shaft Inspection Mirror |
| Heavy rubber grip and strong, spring steel flexible shaft. O60mm Mirror suitable for use in confined areas. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6503 info) |
| |
| Flexible Claw Pick-up Tool |
| Bowden cable construction with spring loaded claw grab. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK653 info) |
| |
| Flexible Driver 190mm with 11pc Bit Set |
| Flexible shaft with spinner and secure bit retention socket. Hexagonal profile design with ribbed handle for maximum power transfer from hand to fixing. Impact resistant head with hanging hole. Supplied with 11pc bit set |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK4309 info) |
| |
| Flexible Driver 250mm with 11pc Bit Set |
| Flexible shaft with spinner and secure bit retention socket. Hexagonal profile design with ribbed handle for maximum power transfer from hand to fixing. Impact resistant head with hanging hole. Supplied with 11pc bit set |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK4310 info) |
| |
| Flexible Head Ratchet Wrench Set 12pc Metric 8 - 19mm |
| Chrome Vanadium steel combination ratchet wrenches with 72-tooth, WallDriver, ratchet ring, giving ultra smooth ratchet action requiring only 5ø rotation to pick up the next ratchet tooth. Flexible ring head is ideal for awkward applications. Supplied as |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6382 info) |
| |
| Flexible Magnetic Pick Up Tool |
| Chrome plated flexible shaft. Powerful enclosed magnet which helps reduce side pull. Dipped vinyl comfort handle. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6530 info) |
| |
| Flexible Magnetic Pick Up Tool 1kg Capacity |
| Chrome plated flexible shafts fitted with high quality strong magnets. Powermaxr handles fit perfectly in the hand providing comfort and control. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6532 info) |
| |
| Flexible Magnetic Pick Up Tool 2kg Capacity |
| Chrome plated flexible shafts fitted with high quality strong magnets. Powermaxr handles fit perfectly in the hand providing comfort and control. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6533 info) |
| |
| Flexible Magnetic Pick Up Tool 3kg Capacity |
| Chrome plated flexible shafts fitted with high quality strong magnets. Powermaxr handles fit perfectly in the hand providing comfort and control. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6534 info) |
| |
| Flexi-Extension Bars |
| Suitable for use where traditional solid bar extension bars will not fit. Suitable for all hand ratchet applications and workshop tested. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK734 info) |
| |
| Flexi-Extension Bars |
| Suitable for use where traditional solid bar extension bars will not fit. Suitable for all hand ratchet applications and workshop tested. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK735 info) |
| |
| Folding Hex Key Sets 11pc |
| Chrome Molybdenum steel shafts hardened and tempered with black phosphate finish for corrosion resistance. Keys spring loaded into chromed case. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK94 info) |
| |
| Folding Hex Key Sets 11pc |
| Chrome Molybdenum steel shafts hardened and tempered with black phosphate finish for corrosion resistance. Keys spring loaded into chromed case. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK95 info) |
| |
| Folding Wrench Sets 8pc |
| Case manufactured from 2mm plate with Chrome Vanadium steel wrench shafts, heat treated, hardened and matt Chrome plated. Spring fingers assist location of key shafts and prevent keys unfolding during storage. Supplied with hanging loop. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6131 info) |
| |
| Folding Wrench Sets 8pc |
| Case manufactured from 2mm plate with Chrome Vanadium steel wrench shafts, heat treated, hardened and matt chrome plated. Spring fingers assist location of key shafts and prevent keys unfolding during storage. Supplied with hanging loop. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6132 info) |
| |
| Folding Wrench Sets 8pc |
| Case manufactured from 2mm plate with Chrome Vanadium steel wrench shafts, heat treated, hardened and matt chrome plated. Spring fingers assist location of key shafts and prevent keys unfolding during storage. Supplied with hanging loop. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6133 info) |
| |
| Folding Wrench Sets 8pc |
| Case manufactured from 2mm plate with Chrome Vanadium steel wrench shafts, heat treated, hardened and matt chrome plated. Spring fingers assist location of key shafts and prevent keys unfolding during storage. Supplied with hanging loop. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6134 info) |
| |
| Gearless Combination Wrench Sets WallDriver |
| Heat treated Chrome Vanadium steel wrenches with mirror polished chrome finish. Super smooth gearless ratchet mechanism with 0§ ratchet backlash. Ratchet rings feature WallDriver configuration allowing even rounded off fixings to be gripped. Supplied in deluxe wooden storage case with spring catch. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK637 info) |
| |
| Gearless Combination Wrench Sets WallDriver |
| Heat treated Chrome Vanadium steel wrenches with mirror polished chrome finish. Super smooth gearless ratchet mechanism with 0§ ratchet backlash. Ratchet rings feature WallDriver configuration allowing even rounded off fixings to be gripped. Supplied in deluxe wooden storage case with spring catch. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK638 info) |
| |
| Gearless Ratchet Screwdriver/Driver Sets 34pc |
| Stepless, super smooth ratchet mechanism with 0ø backlash and twist reverse mechanism. Large diameter grip with integral bit storage on AK6498 and AK6500, with AK6499 featuring a T-handle grip for extra power transfer. Chrome Vanadium steel shaft with magnetic bit retention. Supplied with 33pc S2 steel bit and extension set. Contents: Driver Bits; Slotted - 3, 4, 5, 6, 7mm, Hex - 2, 2.5, 3, 4, 5, 6mm, TRX-Star* - T10, T15, T20, T25, T30, T40, Pozi - #1 x 2, #2 x 3, #3 x 2, Phillips - #0, #1 x 2, #2 x 3, #3 x 2, Magnetic Drive Adaptor/Extension. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6497 info) |
| |
| Gearless Ratchet Screwdriver/Driver Sets 34pc |
| Stepless, super smooth ratchet mechanism with 0ø backlash and twist reverse mechanism. Large diameter grip with integral bit storage on AK6498 and AK6500, with AK6499 featuring a T-handle grip for extra power transfer. Chrome Vanadium steel shaft with magnetic bit retention. Supplied with 33pc S2 steel bit and extension set. Contents: Driver Bits; Slotted - 3, 4, 5, 6, 7mm, Hex - 2, 2.5, 3, 4, 5, 6mm, TRX-Star* - T10, T15, T20, T25, T30, T40, Pozi - #1 x 2, #2 x 3, #3 x 2, Phillips - #0, #1 x 2, #2 x 3, #3 x 2, Magnetic Drive Adaptor/Extension. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6498 info) |
| |
| Gearless Ratchet Screwdriver/Driver Sets 34pc |
| Stepless, super smooth ratchet mechanism with 0ø backlash and twist reverse mechanism. Large diameter grip with integral bit storage on AK6498 and AK6500, with AK6499 featuring a T-handle grip for extra power transfer. Chrome Vanadium steel shaft with magnetic bit retention. Supplied with 33pc S2 steel bit and extension set. Contents: Driver Bits; Slotted - 3, 4, 5, 6, 7mm, Hex - 2, 2.5, 3, 4, 5, 6mm, TRX-Star* - T10, T15, T20, T25, T30, T40, Pozi - #1 x 2, #2 x 3, #3 x 2, Phillips - #0, #1 x 2, #2 x 3, #3 x 2, Magnetic Drive Adaptor/Extension. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6499 info) |
| |
| Gearless Ratchet Screwdriver/Driver Sets 34pc |
| Stepless, super smooth ratchet mechanism with 0ø backlash and twist reverse mechanism. Large diameter grip with integral bit storage on AK6498 and AK6500, with AK6499 featuring a T-handle grip for extra power transfer. Chrome Vanadium steel shaft with magnetic bit retention. Supplied with 33pc S2 steel bit and extension set. Contents: Driver Bits; Slotted - 3, 4, 5, 6, 7mm, Hex - 2, 2.5, 3, 4, 5, 6mm, TRX-Star* - T10, T15, T20, T25, T30, T40, Pozi - #1 x 2, #2 x 3, #3 x 2, Phillips - #0, #1 x 2, #2 x 3, #3 x 2, Magnetic Drive Adaptor/Extension. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6500 info) |
| |
| Gearless Ratchet Wrenches |
| Chrome Vanadium steel ratchet wrenches. Hardened, tempered and finished in deep polished high chrome. Super smooth gearless design eliminates ratchet backlash. Slim style contoured handle with pear-head design. Features include push-through reverse and silent action. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK561 info) |
| |
| Gearless Ratchet Wrenches |
| Chrome Vanadium steel ratchet wrenches. Hardened, tempered and finished in deep polished high chrome. Super smooth gearless design eliminates ratchet backlash. Slim style contoured handle with pear-head design. Features include push-through reverse and silent action. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK562 info) |
| |
| Gearless Ratchet Wrenches |
| Chrome Vanadium steel ratchet wrenches. Hardened, tempered and finished in deep polished high chrome. Super smooth gearless design eliminates ratchet backlash. Slim style contoured handle with pear-head design. Features include push-through reverse and silent action. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK563 info) |
| |
| Hair Pins 150pcs |
| Hair pin assortment. Partitioned case. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code BHP150 info) |
| |
| Hammer Face, Extra Hard Yellow |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code 342/712AF info) |
| |
| Hammer Face, Extra Hard Yellow |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code 342/714AF info) |
| |
| Hammer Face, Extra Hard Yellow |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code 342/716AF info) |
| |
| Hammer Face, Medium Red |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code 342/712PF info) |
| |
| Hammer Face, Medium Red |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code 342/714PF info) |
| |
| Hammer Face, Medium Red |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code 342/716PF info) |
| |
| Hammer Face, Nylon |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code 342/712NF info) |
| |
| Hammer Face, Nylon |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code 342/714NF info) |
| |
| Hammer Face, Nylon |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code 342/716NF info) |
| |
| Hammer Face, Soft Grey |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code 342/712VF info) |
| |
| Hammer Face, Soft Grey |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code 342/714VF info) |
| |
| Hammer Face, Soft Grey |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code 342/716VF info) |
| |
| Hammer Face, Tough Brown |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code 342/712TF info) |
| |
| Hammer Face, Tough Brown |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code 342/714TF info) |
| |
| Hammer Face, Tough Brown |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code 342/716TF info) |
| |
| Hammer-Thru Screwdriver Set 7pc |
| Shafts manufactured from heat treated Chrome Vanadium steel chrome plated for corrosion resistance. Shaft runs entire length of handle and is suitable for hammering in order to loosen rusted fixings. Square section shaft allows use with wrench for increased torque application. Impact resistant handles. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK73 info) |
| |
| Hand Riveter - Aluminium |
| GS/TUV Approved drop forged aluminium body with heavy duty SCM4 grade jaws, carbon steel jaw case and pin. PVC handle grips. Supplied with four rivet nozzles to accept 2.4mm(3/32), 3.2mm(1/8), 4.0mm(5/32) and 4.8mm(3/16) rivets. Supplied with nozzle spanner. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK9902 info) |
| |
| Heavy Duty Magnetic Pick-up Tool |
| Metal bodied pick-up tool with gold cap, pocket-clip and magnetic retainer. Huge 1.5kg pick-up capacity from O10mm magnet. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6511 info) |
| |
| Heavy Duty Magnetic Pick-up Tool/Pen |
| Metal bodied pick-up tool with gold effect cap, pocket clip and magnetic retainer. 1.0kg pick-up capacity. Built-in ball point pen. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6512 info) |
| |
| Hex Key Set 25pc |
| Chrome Vanadium steel hex key set with long-arm Imperial sizes and short-arm Metric sizes. Supplied in tool roll. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK93 info) |
| |
| Hex Key Set 9pc |
| Manufactured from heat treated and hardened Chrome Vanadium steel with matt chrome finish. Supplied in sliding case for safe storage and easy key selection. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6135 info) |
| |
| Hex Key Set MM/AF 30pc |
| Chrome Vanadium steel key set in folding carry-case. Includes 15 long arm series Imperial keys and 15 short arm Metric keys. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6144 info) |
| |
| Hex Key Set on Ring 10pc |
| Chemically blackened Chrome Vanadium steel hex keys. Supplied on ring. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6148 info) |
| |
| Hex Key Set on Ring 8pc |
| Chemically blackened Chrome Vanadium steel hex keys. Supplied on ring. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6147 info) |
| |
| Hex Key Socket Set 1/2 inchSq Drive 8pc |
| Forged Chrome Vanadium steel sockets with Chrome Molybdenum S2 steel hex bits. Sockets heat treated and chrome plated for resistance to corrosion. Satin finish with knurled ring to assist gripping socket with greasy fingers. Supplied in steel carry-case. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK9310 info) |
| |
| Hex Key Socket Set 1/2 inchSq Drive 9pc |
| Same materials and manufacturing techniques as AK9310 above. Supplied in steel carry-case. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK620 info) |
| |
| Hex Key Sockets 6pc |
| Forged Chrome Vanadium steel sockets with Chrome Molybdenum S2 steel hex bits. AK6561 features one piece Chrome Vanadium steel socket bits. Sockets are heat treated, chrome plated and satin finished. Knurled rings assist the gripping of the sockets with greasy fingers. Supplied on socket rail. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6209 info) |
| |
| Hex Key Sockets 6pc |
| Forged Chrome Vanadium steel sockets with Chrome Molybdenum S2 steel hex bits. AK6561 features one piece Chrome Vanadium steel socket bits. Sockets are heat treated, chrome plated and satin finished. Knurled rings assist the gripping of the sockets with greasy fingers. Supplied on socket rail. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK656 info) |
| |
| Hex Key Sockets 6pc |
| Forged Chrome Vanadium steel sockets with Chrome Molybdenum S2 steel hex bits. AK6561 features one piece Chrome Vanadium steel socket bits. Sockets are heat treated, chrome plated and satin finished. Knurled rings assist the gripping of the sockets with greasy fingers. Supplied on socket rail. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6561 info) |
| |
| Hexagon Nuts 150pcs |
| Zinc plated hex nuts. Partitioned case. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code BHN150 info) |
| |
| High Torque Adjustable Shank Screwdriver - GS/TUV |
| Forged, hardened and satin finished Chrome Vanadium steel shank. Adjust length, at the push of a button, in 20mm steps. Tough ABS handle for indestructible operation. Meets and exceeds German GS/TUV standards for torque capacity. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK4984 info) |
| |
| High Torque Adjustable Shank Screwdriver and Socke |
| Forged, hardened and satin finished Chrome Vanadium steel shank. Adjust length, at the push of a button, in 20mm steps. Tough ABS handle for indestructible operation. Meets and exceeds German GS/TUV standards for torque capacity. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK4983 info) |
| |
| High Torque Double-Ended Adjustable Screwdriver |
| Unique adjustable driver with 3 spring loaded Chrome Vanadium jaws. Always have the right length driver in your hand. Virtually indestructible construction. Adjustable driver length, from 125mm up to 190mm and any length in-between. Includes double-ended S2 steel driver shaft. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK4985 info) |
| |
| High Torque Ratchet Screwdriver & Socket Set 21pc |
| Virtually indestructible geared ratchet manufactured to exceed German DIN743115 standard by four times. Clip bit retention with unique snap lock articulated joint. Shockproof ABS handle with cushion grip. Chrome Vanadium 6 point, satin finished sockets heat treated and tempered. Chrome Molybdenum S2 steel driver bits. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK498 info) |
| |
| High Torque Ratchet Screwdriver GS/TUV |
| Virtually indestructible Chrome Vanadium geared ratchet mechanism manufactured to exceed German DIN743115 standard by four times. Clip bit retention with unique snap-lock articulated joint. Restyled shockproof ABS handle for equal appearance and performance. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK4982 info) |
| |
| Hose Clamp Locking Plier 235mm O30mm |
| Rounded jaws which pinch flexible tubing reducing the risk of damage. Precision milled tip and throat make these especially suitable for brake and fuel lines. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6839 info) |
| |
| Hose Clip Assortment |
| Hose clips in popular sizes. Packed in individual sizes or as an assorted pack of 20. Model No: Size: Qty: HC1117 11-17mm x 8mm 25pc HC1626 16-26mm x 8mm 15pc HC2232 22-32mm x 12.7mm 15pc HC2638 26-38mm x 12.7mm 6pc HC3252 32-52mm x 12.7mm 6pc HC713 7-13mm x 8mm 25pc |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code HC/KIT20 info) |
| |
| Hose Clips |
| Hose clips in popular sizes. Packed in individual sizes or as an assorted pack of 20. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code HC1117 info) |
| |
| Hose Clips |
| Hose clips in popular sizes. Packed in individual sizes or as an assorted pack of 20. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code HC1626 info) |
| |
| Hose Clips |
| Hose clips in popular sizes. Packed in individual sizes or as an assorted pack of 20. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code HC2232 info) |
| |
| Hose Clips |
| Hose clips in popular sizes. Packed in individual sizes or as an assorted pack of 20. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code HC2638 info) |
| |
| Hose Clips |
| Hose clips in popular sizes. Packed in individual sizes or as an assorted pack of 20. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code HC3252 info) |
| |
| Hose Clips |
| Hose clips in popular sizes. Packed in individual sizes or as an assorted pack of 20. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code HC713 info) |
| |
| Illuminated Inspection Mirror |
| Strong flexible metal element with illuminated tip and fully articulated inspection mirror. Twist on/off control. Suitable for automotive and industrial applications. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK650 info) |
| |
| Impact Driver Set 15pc |
| Heavy duty 1/2 inchsquare drive adaptor with Chrome Vanadium steel bits. Fully chromed impact body with twist to reverse function. Heavy knurling allows grip by oily hands. Supplied in steel case. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK208 info) |
| |
| Impact Driver Set 15pc |
| Heavy duty impact screwdriver with rubber grip and integral knuckle guard. Supplied with 13pc Chrome Vanadium steel driver bit set and 1/2 inch drive adaptor. Supplied in carry-case. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK2081 info) |
| |
| Impact TRX-Star Security Socket Set 15pc 1/4 inch&3/8 inch |
| Drop forged one piece Chrome Vanadium steel, specially hardened and tempered. Security type head. Finished in black oxide for corrosion resistance. Supplied on two rails. Suitable for use with any impact tool. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK5585 info) |
| |
| Impact TRX-Star Socket Set 15pc 1/4 inch & 3/8 inch Drive |
| Drop forged one piece Chrome Vanadium steel, specially hardened and tempered. Finished in black oxide for corrosion resistance. Supplied on two rails. Suitable for use with any impact tool. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK5584 info) |
| |
| Individual Socket Display Stand 1/2 inch Drive c/w Sto |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code SOCKET/PAC/12 info) |
| |
| Individual Socket Display Stand 3/8 inch Drive c/w Sto |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code SOCKET/PAC/38 info) |
| |
| Individual Socket Pac 1/2 inch Drive c/w Stock w/o Sta |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code SOCKET/PAC/12X info) |
| |
| Individual Socket Pac 3/8 inch Drive c/w Stock w/o Sta |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code SOCKET/PAC/38X info) |
| |
| Individual Sockets 1/2 inchSq Drive WallDriver |
| Cold forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Chrome plated and finished in half chrome, half satin effect with knurled ring for extra grip with oily fingers. WallDriver socket configuration. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S1208 info) |
| |
| Individual Sockets 1/2 inchSq Drive WallDriver |
| Cold forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Chrome plated and finished in half chrome, half satin effect with knurled ring for extra grip with oily fingers. WallDriver socket configuration. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S1209 info) |
| |
| Individual Sockets 1/2 inchSq Drive WallDriver |
| Cold forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Chrome plated and finished in half chrome, half satin effect with knurled ring for extra grip with oily fingers. WallDriver socket configuration. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S1210 info) |
| |
| Individual Sockets 1/2 inchSq Drive WallDriver |
| Cold forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Chrome plated and finished in half chrome, half satin effect with knurled ring for extra grip with oily fingers. WallDriver socket configuration. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S1211 info) |
| |
| Individual Sockets 1/2 inchSq Drive WallDriver |
| Cold forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Chrome plated and finished in half chrome, half satin effect with knurled ring for extra grip with oily fingers. WallDriver socket configuration. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S1211D info) |
| |
| Individual Sockets 1/2 inchSq Drive WallDriver |
| Cold forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Chrome plated and finished in half chrome, half satin effect with knurled ring for extra grip with oily fingers. WallDriver socket configuration. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S1212 info) |
| |
| Individual Sockets 1/2 inchSq Drive WallDriver |
| Cold forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Chrome plated and finished in half chrome, half satin effect with knurled ring for extra grip with oily fingers. WallDriver socket configuration. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S1212D info) |
| |
| Individual Sockets 1/2 inchSq Drive WallDriver |
| Cold forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Chrome plated and finished in half chrome, half satin effect with knurled ring for extra grip with oily fingers. WallDriver socket configuration. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S1213 info) |
| |
| Individual Sockets 1/2 inchSq Drive WallDriver |
| Cold forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Chrome plated and finished in half chrome, half satin effect with knurled ring for extra grip with oily fingers. WallDriver socket configuration. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S1213D info) |
| |
| Individual Sockets 1/2 inchSq Drive WallDriver |
| Cold forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Chrome plated and finished in half chrome, half satin effect with knurled ring for extra grip with oily fingers. WallDriver socket configuration. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S1214 info) |
| |
| Individual Sockets 1/2 inchSq Drive WallDriver |
| Cold forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Chrome plated and finished in half chrome, half satin effect with knurled ring for extra grip with oily fingers. WallDriver socket configuration. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S1214D info) |
| |
| Individual Sockets 1/2 inchSq Drive WallDriver |
| Cold forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Chrome plated and finished in half chrome, half satin effect with knurled ring for extra grip with oily fingers. WallDriver socket configuration. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S1215 info) |
| |
| Individual Sockets 1/2 inchSq Drive WallDriver |
| Cold forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Chrome plated and finished in half chrome, half satin effect with knurled ring for extra grip with oily fingers. WallDriver socket configuration. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S1215D info) |
| |
| Individual Sockets 1/2 inchSq Drive WallDriver |
| Cold forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Chrome plated and finished in half chrome, half satin effect with knurled ring for extra grip with oily fingers. WallDriver socket configuration. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S1216 info) |
| |
| Individual Sockets 1/2 inchSq Drive WallDriver |
| Cold forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Chrome plated and finished in half chrome, half satin effect with knurled ring for extra grip with oily fingers. WallDriver socket configuration. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S1216D info) |
| |
| Individual Sockets 1/2 inchSq Drive WallDriver |
| Cold forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Chrome plated and finished in half chrome, half satin effect with knurled ring for extra grip with oily fingers. WallDriver socket configuration. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S1217 info) |
| |
| Individual Sockets 1/2 inchSq Drive WallDriver |
| Cold forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Chrome plated and finished in half chrome, half satin effect with knurled ring for extra grip with oily fingers. WallDriver socket configuration. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S1217D info) |
| |
| Individual Sockets 1/2 inchSq Drive WallDriver |
| Cold forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Chrome plated and finished in half chrome, half satin effect with knurled ring for extra grip with oily fingers. WallDriver socket configuration. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S1218 info) |
| |
| Individual Sockets 1/2 inchSq Drive WallDriver |
| Cold forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Chrome plated and finished in half chrome, half satin effect with knurled ring for extra grip with oily fingers. WallDriver socket configuration. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S1218D info) |
| |
| Individual Sockets 1/2 inchSq Drive WallDriver |
| Cold forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Chrome plated and finished in half chrome, half satin effect with knurled ring for extra grip with oily fingers. WallDriver socket configuration. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S1219 info) |
| |
| Individual Sockets 1/2 inchSq Drive WallDriver |
| Cold forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Chrome plated and finished in half chrome, half satin effect with knurled ring for extra grip with oily fingers. WallDriver socket configuration. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S1219D info) |
| |
| Individual Sockets 1/2 inchSq Drive WallDriver |
| Cold forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Chrome plated and finished in half chrome, half satin effect with knurled ring for extra grip with oily fingers. WallDriver socket configuration. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S1220 info) |
| |
| Individual Sockets 1/2 inchSq Drive WallDriver |
| Cold forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Chrome plated and finished in half chrome, half satin effect with knurled ring for extra grip with oily fingers. WallDriver socket configuration. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S1221 info) |
| |
| Individual Sockets 1/2 inchSq Drive WallDriver |
| Cold forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Chrome plated and finished in half chrome, half satin effect with knurled ring for extra grip with oily fingers. WallDriver socket configuration. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S1221D info) |
| |
| Individual Sockets 1/2 inchSq Drive WallDriver |
| Cold forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Chrome plated and finished in half chrome, half satin effect with knurled ring for extra grip with oily fingers. WallDriver socket configuration. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S1222 info) |
| |
| Individual Sockets 1/2 inchSq Drive WallDriver |
| Cold forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Chrome plated and finished in half chrome, half satin effect with knurled ring for extra grip with oily fingers. WallDriver socket configuration. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S1222D info) |
| |
| Individual Sockets 1/2 inchSq Drive WallDriver |
| Cold forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Chrome plated and finished in half chrome, half satin effect with knurled ring for extra grip with oily fingers. WallDriver socket configuration. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S1223 info) |
| |
| Individual Sockets 1/2 inchSq Drive WallDriver |
| Cold forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Chrome plated and finished in half chrome, half satin effect with knurled ring for extra grip with oily fingers. WallDriver socket configuration. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S1224 info) |
| |
| Individual Sockets 1/2 inchSq Drive WallDriver |
| Cold forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Chrome plated and finished in half chrome, half satin effect with knurled ring for extra grip with oily fingers. WallDriver socket configuration. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S1224D info) |
| |
| Individual Sockets 1/2 inchSq Drive WallDriver |
| Cold forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Chrome plated and finished in half chrome, half satin effect with knurled ring for extra grip with oily fingers. WallDriver socket configuration. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S1225 info) |
| |
| Individual Sockets 1/2 inchSq Drive WallDriver |
| Cold forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Chrome plated and finished in half chrome, half satin effect with knurled ring for extra grip with oily fingers. WallDriver socket configuration. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S1226 info) |
| |
| Individual Sockets 1/2 inchSq Drive WallDriver |
| Cold forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Chrome plated and finished in half chrome, half satin effect with knurled ring for extra grip with oily fingers. WallDriver socket configuration. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S1227 info) |
| |
| Individual Sockets 1/2 inchSq Drive WallDriver |
| Cold forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Chrome plated and finished in half chrome, half satin effect with knurled ring for extra grip with oily fingers. WallDriver socket configuration. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S1228 info) |
| |
| Individual Sockets 1/2 inchSq Drive WallDriver |
| Cold forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Chrome plated and finished in half chrome, half satin effect with knurled ring for extra grip with oily fingers. WallDriver socket configuration. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S1229 info) |
| |
| Individual Sockets 1/2 inchSq Drive WallDriver |
| Cold forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Chrome plated and finished in half chrome, half satin effect with knurled ring for extra grip with oily fingers. WallDriver socket configuration. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S1230 info) |
| |
| Individual Sockets 1/2 inchSq Drive WallDriver |
| Cold forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Chrome plated and finished in half chrome, half satin effect with knurled ring for extra grip with oily fingers. WallDriver socket configuration. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S1232 info) |
| |
| Individual Sockets 3/4 inchSq Drive |
| Forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Finished in high chrome for corrosion resistance. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S34/19 info) |
| |
| Individual Sockets 3/4 inchSq Drive |
| Forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Finished in high chrome for corrosion resistance. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S34/22 info) |
| |
| Individual Sockets 3/4 inchSq Drive |
| Forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Finished in high chrome for corrosion resistance. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S34/24 info) |
| |
| Individual Sockets 3/4 inchSq Drive |
| Forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Finished in high chrome for corrosion resistance. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S34/26 info) |
| |
| Individual Sockets 3/4 inchSq Drive |
| Forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Finished in high chrome for corrosion resistance. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S34/27 info) |
| |
| Individual Sockets 3/4 inchSq Drive |
| Forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Finished in high chrome for corrosion resistance. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S34/29 info) |
| |
| Individual Sockets 3/4 inchSq Drive |
| Forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Finished in high chrome for corrosion resistance. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S34/30 info) |
| |
| Individual Sockets 3/4 inchSq Drive |
| Forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Finished in high chrome for corrosion resistance. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S34/32 info) |
| |
| Individual Sockets 3/4 inchSq Drive |
| Forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Finished in high chrome for corrosion resistance. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S34/33 info) |
| |
| Individual Sockets 3/4 inchSq Drive |
| Forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Finished in high chrome for corrosion resistance. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S34/36 info) |
| |
| Individual Sockets 3/4 inchSq Drive |
| Forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Finished in high chrome for corrosion resistance. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S34/38 info) |
| |
| Individual Sockets 3/4 inchSq Drive |
| Forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Finished in high chrome for corrosion resistance. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S34/41 info) |
| |
| Individual Sockets 3/4 inchSq Drive |
| Forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Finished in high chrome for corrosion resistance. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S34/42 info) |
| |
| Individual Sockets 3/4 inchSq Drive |
| Forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Finished in high chrome for corrosion resistance. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S34/46 info) |
| |
| Individual Sockets 3/4 inchSq Drive |
| Forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Finished in high chrome for corrosion resistance. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S34/50 info) |
| |
| Individual Sockets 3/4 inchSq Drive |
| Forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Finished in high chrome for corrosion resistance. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S34/55 info) |
| |
| Individual Sockets 3/8 inchSq Drive WallDriver |
| Cold forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Chrome plated and finished in half chrome, half satin effect with knurled ring for extra grip with oily fingers. WallDriver socket configuration. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S3806 info) |
| |
| Individual Sockets 3/8 inchSq Drive WallDriver |
| Cold forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Chrome plated and finished in half chrome, half satin effect with knurled ring for extra grip with oily fingers. WallDriver socket configuration. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S3807 info) |
| |
| Individual Sockets 3/8 inchSq Drive WallDriver |
| Cold forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Chrome plated and finished in half chrome, half satin effect with knurled ring for extra grip with oily fingers. WallDriver socket configuration. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S3808 info) |
| |
| Individual Sockets 3/8 inchSq Drive WallDriver |
| Cold forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Chrome plated and finished in half chrome, half satin effect with knurled ring for extra grip with oily fingers. WallDriver socket configuration. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S3808D info) |
| |
| Individual Sockets 3/8 inchSq Drive WallDriver |
| Cold forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Chrome plated and finished in half chrome, half satin effect with knurled ring for extra grip with oily fingers. WallDriver socket configuration. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S3809 info) |
| |
| Individual Sockets 3/8 inchSq Drive WallDriver |
| Cold forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Chrome plated and finished in half chrome, half satin effect with knurled ring for extra grip with oily fingers. WallDriver socket configuration. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S3809D info) |
| |
| Individual Sockets 3/8 inchSq Drive WallDriver |
| Cold forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Chrome plated and finished in half chrome, half satin effect with knurled ring for extra grip with oily fingers. WallDriver socket configuration. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S3810 info) |
| |
| Individual Sockets 3/8 inchSq Drive WallDriver |
| Cold forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Chrome plated and finished in half chrome, half satin effect with knurled ring for extra grip with oily fingers. WallDriver socket configuration. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S3810D info) |
| |
| Individual Sockets 3/8 inchSq Drive WallDriver |
| Cold forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Chrome plated and finished in half chrome, half satin effect with knurled ring for extra grip with oily fingers. WallDriver socket configuration. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S3811 info) |
| |
| Individual Sockets 3/8 inchSq Drive WallDriver |
| Cold forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Chrome plated and finished in half chrome, half satin effect with knurled ring for extra grip with oily fingers. WallDriver socket configuration. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S3811D info) |
| |
| Individual Sockets 3/8 inchSq Drive WallDriver |
| Cold forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Chrome plated and finished in half chrome, half satin effect with knurled ring for extra grip with oily fingers. WallDriver socket configuration. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S3812 info) |
| |
| Individual Sockets 3/8 inchSq Drive WallDriver |
| Cold forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Chrome plated and finished in half chrome, half satin effect with knurled ring for extra grip with oily fingers. WallDriver socket configuration. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S3812D info) |
| |
| Individual Sockets 3/8 inchSq Drive WallDriver |
| Cold forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Chrome plated and finished in half chrome, half satin effect with knurled ring for extra grip with oily fingers. WallDriver socket configuration. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S3813 info) |
| |
| Individual Sockets 3/8 inchSq Drive WallDriver |
| Cold forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Chrome plated and finished in half chrome, half satin effect with knurled ring for extra grip with oily fingers. WallDriver socket configuration. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S3813D info) |
| |
| Individual Sockets 3/8 inchSq Drive WallDriver |
| Cold forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Chrome plated and finished in half chrome, half satin effect with knurled ring for extra grip with oily fingers. WallDriver socket configuration. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S3814 info) |
| |
| Individual Sockets 3/8 inchSq Drive WallDriver |
| Cold forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Chrome plated and finished in half chrome, half satin effect with knurled ring for extra grip with oily fingers. WallDriver socket configuration. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S3814D info) |
| |
| Individual Sockets 3/8 inchSq Drive WallDriver |
| Cold forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Chrome plated and finished in half chrome, half satin effect with knurled ring for extra grip with oily fingers. WallDriver socket configuration. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S3815 info) |
| |
| Individual Sockets 3/8 inchSq Drive WallDriver |
| Cold forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Chrome plated and finished in half chrome, half satin effect with knurled ring for extra grip with oily fingers. WallDriver socket configuration. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S3815D info) |
| |
| Individual Sockets 3/8 inchSq Drive WallDriver |
| Cold forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Chrome plated and finished in half chrome, half satin effect with knurled ring for extra grip with oily fingers. WallDriver socket configuration. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S3816 info) |
| |
| Individual Sockets 3/8 inchSq Drive WallDriver |
| Cold forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Chrome plated and finished in half chrome, half satin effect with knurled ring for extra grip with oily fingers. WallDriver socket configuration. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S3816D info) |
| |
| Individual Sockets 3/8 inchSq Drive WallDriver |
| Cold forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Chrome plated and finished in half chrome, half satin effect with knurled ring for extra grip with oily fingers. WallDriver socket configuration. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S3817 info) |
| |
| Individual Sockets 3/8 inchSq Drive WallDriver |
| Cold forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Chrome plated and finished in half chrome, half satin effect with knurled ring for extra grip with oily fingers. WallDriver socket configuration. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S3817D info) |
| |
| Individual Sockets 3/8 inchSq Drive WallDriver |
| Cold forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Chrome plated and finished in half chrome, half satin effect with knurled ring for extra grip with oily fingers. WallDriver socket configuration. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S3818 info) |
| |
| Individual Sockets 3/8 inchSq Drive WallDriver |
| Cold forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Chrome plated and finished in half chrome, half satin effect with knurled ring for extra grip with oily fingers. WallDriver socket configuration. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S3818D info) |
| |
| Individual Sockets 3/8 inchSq Drive WallDriver |
| Cold forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Chrome plated and finished in half chrome, half satin effect with knurled ring for extra grip with oily fingers. WallDriver socket configuration. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S3819 info) |
| |
| Individual Sockets 3/8 inchSq Drive WallDriver |
| Cold forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Chrome plated and finished in half chrome, half satin effect with knurled ring for extra grip with oily fingers. WallDriver socket configuration. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S3819D info) |
| |
| Individual Sockets 3/8 inchSq Drive WallDriver |
| Cold forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Chrome plated and finished in half chrome, half satin effect with knurled ring for extra grip with oily fingers. WallDriver socket configuration. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S3820 info) |
| |
| Individual Sockets 3/8 inchSq Drive WallDriver |
| Cold forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Chrome plated and finished in half chrome, half satin effect with knurled ring for extra grip with oily fingers. WallDriver socket configuration. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S3821 info) |
| |
| Individual Sockets 3/8 inchSq Drive WallDriver |
| Cold forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Chrome plated and finished in half chrome, half satin effect with knurled ring for extra grip with oily fingers. WallDriver socket configuration. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S3822 info) |
| |
| Individual Sockets 3/8 inchSq Drive WallDriver |
| Cold forged Chrome Vanadium steel sockets. Hardened and tempered for added strength. Chrome plated and finished in half chrome, half satin effect with knurled ring for extra grip with oily fingers. WallDriver socket configuration. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S3824 info) |
| |
| Individual Super Jumbo Combination Wrenches |
| Drop forged Chrome Vanadium steel wrench. Packed individually. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK2166/01 info) |
| |
| Individual Super Jumbo Combination Wrenches |
| Drop forged Chrome Vanadium steel wrench. Packed individually. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK2166/02 info) |
| |
| Individual Super Jumbo Combination Wrenches |
| Drop forged Chrome Vanadium steel wrench. Packed individually. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK2166/03 info) |
| |
| Individual Super Jumbo Combination Wrenches |
| Drop forged Chrome Vanadium steel wrench. Packed individually. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK2166/04 info) |
| |
| Individual Super Jumbo Combination Wrenches |
| Drop forged Chrome Vanadium steel wrench. Packed individually. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK2166/05 info) |
| |
| Individual Super Jumbo Combination Wrenches |
| Drop forged Chrome Vanadium steel wrench. Packed individually. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK2166/06 info) |
| |
| Individual Super Jumbo Combination Wrenches |
| Drop forged Chrome Vanadium steel wrench. Packed individually. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK2166/07 info) |
| |
| Individual Super Jumbo Combination Wrenches |
| Drop forged Chrome Vanadium steel wrench. Packed individually. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK2166/08 info) |
| |
| Individual Super Jumbo Combination Wrenches |
| Drop forged Chrome Vanadium steel wrench. Packed individually. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK2166/09 info) |
| |
| Individual Super Jumbo Combination Wrenches |
| Drop forged Chrome Vanadium steel wrench. Packed individually. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK2166/10 info) |
| |
| Individual Super Jumbo Combination Wrenches |
| Drop forged Chrome Vanadium steel wrench. Packed individually. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK2166/11 info) |
| |
| Individual Super Jumbo Combination Wrenches |
| Drop forged Chrome Vanadium steel wrench. Packed individually. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK2166/12 info) |
| |
| Individual Super Jumbo Combination Wrenches |
| Drop forged Chrome Vanadium steel wrench. Packed individually. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK2167/01 info) |
| |
| Individual Super Jumbo Combination Wrenches |
| Drop forged Chrome Vanadium steel wrench. Packed individually. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK2167/02 info) |
| |
| Individual Super Jumbo Combination Wrenches |
| Drop forged Chrome Vanadium steel wrench. Packed individually. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK2167/03 info) |
| |
| Individual Super Jumbo Combination Wrenches |
| Drop forged Chrome Vanadium steel wrench. Packed individually. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK2167/04 info) |
| |
| Individual Super Jumbo Combination Wrenches |
| Drop forged Chrome Vanadium steel wrench. Packed individually. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK2167/05 info) |
| |
| Individual Super Jumbo Combination Wrenches |
| Drop forged Chrome Vanadium steel wrench. Packed individually. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK2167/06 info) |
| |
| Individual Super Jumbo Combination Wrenches |
| Drop forged Chrome Vanadium steel wrench. Packed individually. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK2167/07 info) |
| |
| Individual Super Jumbo Combination Wrenches |
| Drop forged Chrome Vanadium steel wrench. Packed individually. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK2167/08 info) |
| |
| Individual Super Jumbo Combination Wrenches |
| Drop forged Chrome Vanadium steel wrench. Packed individually. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK2167/09 info) |
| |
| Industrial Pliers Set 3pc |
| Manufactured from Chrome Vanadium Steel. Drop forged, hardened and tempered, with phosphate black finish for corrosion resistance. PVC Super grip handles. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK82 info) |
| |
| Internal/Bent Circlip Pliers |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK8431 info) |
| |
| Internal/Bent Circlip Pliers |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK8432 info) |
| |
| Internal/Bent Circlip Pliers |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK8433 info) |
| |
| Internal/Bent Circlip Pliers |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK8435 info) |
| |
| Internal/External Circlip Plier Set 2pc 150mm |
| Reversible handle joint allows use on both internal and external circlips. Chrome Molybdenum fitted with PVC grips. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK8445 info) |
| |
| Internal/External Circlip Pliers 175mm |
| Spring loaded jaw sets manufactured from hardened and tempered steel. Pliers are fully polished and fitted with non-slip polyfoam grips. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK8441 info) |
| |
| Internal/External Circlip Pliers 175mm |
| Spring loaded jaw, manufactured from hardened and tempered steel. Pliers are fully polished and fitted with non-slip polyfoam grips. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK8442 info) |
| |
| Internal/External Circlip Pliers 175mm |
| Spring loaded jaw, manufactured from hardened and tempered steel. Pliers are fully polished and fitted with non-slip polyfoam grips. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK8443 info) |
| |
| Internal/External Circlip Pliers 175mm |
| Spring loaded jaw sets manufactured from hardened and tempered steel. Pliers are fully polished and fitted with non-slip polyfoam grips. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK8444 info) |
| |
| Internal/External Circlip Pliers 200mm |
| Reversible handle joint allows use on both internal and external circlips. Spring loaded jaws. Chrome Molybdenum fitted with PVC grips. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK8446 info) |
| |
| Internal/External Circlip Pliers 200mm |
| Reversible handle joint allows use on both internal and external circlips. Spring loaded jaws. Chrome Molybdenum fitted with PVC grips. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK8447 info) |
| |
| Internal/Straight Circlip Pliers |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK8421 info) |
| |
| Internal/Straight Circlip Pliers |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK8422 info) |
| |
| Internal/Straight Circlip Pliers |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK8424 info) |
| |
| Internal/Straight Circlip Pliers |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK8425 info) |
| |
| JJ-Tip Locking Grip |
| Manufactured with rounded contours for smooth, secure handling. Grip Features linear jaw action which applies pressure perpendicular to the workpiece for secure clamping. Compact size with push-button jaw release is ideal for working in confined spaces. Thumb release operation allows one handed operation. Suitable for a wide variety of applications including welding, gluing and riveting. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6836 info) |
| |
| J-Tip Locking Grip |
| Manufactured with rounded contours for smooth, secure handling. Grips feature linear jaw action which applies pressure perpendicular to the workpiece for secure clamping. Compact size with push-button jaw release is ideal for working in confined spaces. Thumb release operation allows one handed operation. Suitable for a wide variety of applications including welding, gluing and riveting. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6835 info) |
| |
| Jumbo Combination Wrench Set 12pc |
| High quality, drop forged Chrome Vanadium steel wrenches with raised panel shafts. Heat treated and chrome plated with fully polished jaws and bi-hex combination ring. Supplied with tool roll. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK2163 info) |
| |
| Jumbo Combination Wrench Set 12pc |
| Drop forged Chrome Vanadium steel with fully polished slim shafts. Hardened, tempered and chrome plated for corrosion resistance. Supplied with tool roll. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK608 info) |
| |
| Jumbo Combination Wrench Sets - Metric |
| Drop forged Chrome Vanadium Steel wrenches. Hardened, tempered and chromed with fully polished, mirror finish. Open jaw and 12 point ring combination with long slim shaft. Supplied in tool roll. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6082 info) |
| |
| Jumbo Combination Wrench Sets - Metric |
| Drop forged Chrome Vanadium steel wrenches. Hardened, tempered and chromed with fully polished, mirror finish. Open jaw and 12 point ring combination with long slim shaft. Supplied in tool roll. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6083 info) |
| |
| Jumbo Hex Key Wrench Set 10pc |
| Manufactured from heat treated and hardened Chrome Vanadium steel with matt chrome finish. Jumbo sizes suitable for industrial and agricultural applications. Supplied in tough carry-case. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6143 info) |
| |
| Lever Type Tube Bender O10mm |
| Die-cast steel heads suitable for bending soft metal pipes with diameters between O6mm and O10mm up to 180ø. Features include integral pipe retaining clip and tubular steel handles with comfortable rubber grips. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK5053 info) |
| |
| LL-Tip Locking Grip |
| Manufactured with rounded contours for smooth, secure handling. Grip features linear jaw action which applies pressure perpendicular to the workpiece for secure clamping. Compact size with push-button jaw release is ideal for working in confined spaces. Thumb release operation allows one handed operation. Suitable for a wide variety of applications including welding, gluing and riveting. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6833 info) |
| |
| Locking `C' Clamps |
| One handed operation allows free hand to position material whilst being clamped Suitable for clamping material whilst marking, welding, brazing, gluing and soldering. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6826 info) |
| |
| Locking `C' Clamps |
| One handed operation allows free hand to position material whilst being clamped Suitable for clamping material whilst marking, welding, brazing, gluing and soldering. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6827 info) |
| |
| Locking `C' Clamps |
| One handed operation allows free hand to position material whilst being clamped Suitable for clamping material whilst marking, welding, brazing, gluing and soldering. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6841 info) |
| |
| Locking `C' Clamps |
| One handed operation allows free hand to position material whilst being clamped Suitable for clamping material whilst marking, welding, brazing, gluing and soldering. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6842 info) |
| |
| Locking `U' Clamp |
| Suitable for assembly and welding work. One handed operation. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6828 info) |
| |
| Locking Extension Bar Sets 3pc |
| Forged Chrome Vanadium steel shafts, heat treated and chrome plated with mirror finish. Locking mechanism retains socket on extension. Push-button socket release. Deep knurling on shafts allows extra grip for oily fingers when spinning off sockets. Supplied in tool tray. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK771 info) |
| |
| Locking Extension Bar Sets 3pc |
| Forged Chrome Vanadium steel shafts, heat treated and chrome plated with mirror finish. Locking mechanism retains socket on extension. Push-button socket release. Deep knurling on shafts allows extra grip for oily fingers when spinning off sockets. Supplied in tool tray. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK772 info) |
| |
| Locking Grip Table Clamp |
| Converts the following grips into a portable vice. Maximum capacity 50mm. Suitable for Models: AK6821 AK6843 AK6823 AK6848 AK6827 AK6849 AK6830 AK6850 AK6841 AK6851 AK6842 |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6819 info) |
| |
| Locking Micrometer Type Torque Wrench |
| Chrome Vanadium steel ratchet head with flip reverse action and push-through 1/2 inchsq drive to allow torquing in both directions. Large composite handle grip with unique mechanism which locks adjustment in place once torque figure is selected. Calibration tolerance in accordance with BS2689/94. Scales graduated in both Nm and lb.ft. Wrench is individually tested with ñ4% accuracy and each wrench is issued with an individually numbered test certificate. Supplied in carry-case. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code STW201 info) |
| |
| Locking Plier Set 3pc |
| Hardened and tempered, drop forged Chrome Vanadium steel jaws with combination profile for sheet or pipe. Deep cut jaw faces assist grip. Knurled jaw adjustment screw and flip release mechanism. Black, rust resistant finish. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK668 info) |
| |
| Locking Pocket Knives |
| Supplied with high quality stainless steel blade. Fitted with aluminium alloy handle with rubber grip for added comfort and control. Available in a range of colours. Blade locks open for safe use. Fitted with belt clip. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code PK1 info) |
| |
| Locking Pocket Knives |
| Supplied with high quality stainless steel blade. Fitted with aluminium alloy handle with rubber grip for added comfort and control. Available in a range of colours. Blade locks open for safe use. Fitted with belt clip. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code PK1/B info) |
| |
| Locking Pocket Knives |
| Supplied with high quality stainless steel blade. Fitted with aluminium alloy handle with rubber grip for added comfort and control. Available in a range of colours. Blade locks open for safe use. Fitted with belt clip. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code PK1/G info) |
| |
| Locking Pocket Knives |
| Supplied with high quality stainless steel blade. Fitted with aluminium alloy handle with rubber grip for added comfort and control. Available in a range of colours. Blade locks open for safe use. Fitted with belt clip. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code PK1/R info) |
| |
| Locking Wing Clamps |
| Designed to aid positioning of wing on inner wing prior to welding or gluing. Spring loaded arm rests on wheel arch flange and swivel pad securely clamps wing in position. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6849 info) |
| |
| Locking Wing Clamps |
| Designed to aid positioning of wing on inner wing prior to welding or gluing. Spring loaded arm rests on wheel arch flange and swivel pad securely clamps wing in position. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6850 info) |
| |
| Locking Wing Clamps |
| Designed to aid positioning of wing on inner wing prior to welding or gluing. Spring loaded arm rests on wheel arch flange and swivel pad securely clamps wing in position. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6851 info) |
| |
| Long Nose Locking Pliers |
| Multi-purpose locking pliers suitable for use where access is confined. Jaws incorporate long section for gripping flat material and curved section for pipes and tubes. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6824 info) |
| |
| Long Nose Locking Pliers |
| Multi-purpose locking pliers suitable for use where access is confined. Jaws incorporate long section for gripping flat material and curved section for pipes and tubes. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6825 info) |
| |
| Long Nose Plier Multi-Tool 21 Function |
| Long nose multi-function, self-tensioning plier, no need to adjust for different size fixings. 21 Functions including bit driver. Supplied with Chrome Vanadium bits. Stainless steel construction for long life. Supplied with belt storage/carry pouch. Functions: 1. Locking Plier 2. Long Nose Plier 3. Regular Jaw Plier 4. Flat Nose Plier 5. Wire Cutter 6. #1 Phillips Driver Bit 7. #2 Phillips Driver Bit 8. 3/16 Slotted Driver Bit 9. 1/4 Slotted Driver Bit 10. Bottle Opener 11. Punch/Scratch Awl 12. 1/8 Hex Wrench 13. 3/16 Hex Wrench 14. 1/4 Hex Wrench 15. Wood Saw Blade 16. Large Slotted Driver 17. Double Cut File 18. Serrated Knife Blade 19. Inch Scale 20. Knife Blade 21. Magnetized Bit Holder |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK21 info) |
| |
| Long Nose Pliers |
| Manufactured from drop forged heat treated steel with induction hardened cutting edges. Fully polished finish with non-slip foam cushion grip handles. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK539 info) |
| |
| Long Nose Pliers |
| Manufactured from drop forged heat treated steel with induction hardened cutting edges. Fully polished finish with non-slip foam cushion grip handles. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK540 info) |
| |
| Long Nose Pliers |
| Manufactured from drop forged heat treated steel with induction hardened cutting edges. Fully polished finish with non-slip foam cushion grip handles. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK541 info) |
| |
| Long Pattern Ball-Ended Hex Key Set 8pc |
| Manufactured from heat treated and hardened Chrome Vanadium steel with matt chrome finish. Keys range in size from 235mm down to 105mm. Ball ends allow key to drive fixing at up to 30ø from the key's central axis. Supplied in sliding case for safe storage and easy key selection. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6139 info) |
| |
| Long Pattern Cushion Grip Screwdriver Set 3pc |
| Hardened and tempered Chrome Vanadium steel shafts with satin chrome finish. Contoured power-grip handles allow superior power transfer from hand to fixing. Supplied in pouch. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK3875 info) |
| |
| Long Pattern Hex Key Set 8pc |
| Manufactured from heat treated and hardened Chrome Vanadium steel with matt chrome finish. Keys range in size from 235mm down to 105mm. Supplied in sliding case for safe storage and easy key selection. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6138 info) |
| |
| Long Pattern Parallel Pin Punch Set 5pc |
| Chrome Vanadium steel stock hardened and heat treated. Chemically blackened for corrosion resistance. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK9124 info) |
| |
| Long Pattern Power Bit Set 9pc |
| Manufactured from Chrome Molybdenum steel. 150mm Long with steel finish. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK565 info) |
| |
| Long Pattern Taper Punch Set 4pc |
| Manufactured from Chrome Vanadium steel, hardened, tempered and chemically blackened shanks with extra long machined tapers. Supplied in plastic case. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK9125 info) |
| |
| Long Reach Security TRX-Star* Key Set 6pc |
| Hardened and tempered Chrome Vanadium steel shafts. Tough, composite comfort grip handle with hanging hole allows extra torque to be applied to the fixing. Short element finished with tamper-proof TRX-Star* drive. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6142 info) |
| |
| Long Type Screwdriver Set 3pc |
| 450mm, Extra long Chrome Vanadium steel shafts. Fully hardened, tempered and matt chrome plated. Classic type handles. Supplied with tool roll. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK373 info) |
| |
| L-Tip Locking Grip |
| Manufactured with rounded contours for smooth, secure handling. Grip features linear jaw action which applies pressure perpendicular to the workpiece for secure clamping. Compact size with push-button jaw release is ideal for working in confined spaces. Thumb release operation allows one handed operation. Suitable for a wide variety of applications including welding, gluing and riveting. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6832 info) |
| |
| Machine Screws & Nuts 366pcs |
| Zinc plated hex nut and machine screws assortment. Partitioned cantilever case. Contents: Size (Qty); Machine Screws - M3x0.5x10(40), M3x0.5x12(30), M4x0.7x12(25), M4x0.7x25(12), M5x0.8x20(12), M5x0.8x25(10), M5x0.8x30(12), M6x1.0x12(20), M6x1.0x20(12), M6x1.0x25mm(10), Hex Nuts - M3x0.5(70), M4x0.7(37), M5x0.8(34), M6x1.0mm(42) |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code BHN366 info) |
| |
| Magnetic Collection Trays |
| Stainless steel trays with O85mm magnets in non-marking cover. Ideal for storing nuts, bolts, screws, washers and sockets during disassembly/assembly. Attaches to any ferrous surface and even works upside-down. Ideal for dismantlers, breakdown trucks and engine rebuilders. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK231 info) |
| |
| Magnetic Collection Trays |
| Stainless steel trays with O85mm magnets in non-marking cover. Ideal for storing nuts, bolts, screws, washers and sockets during disassembly/assembly. Attaches to any ferrous surface and even works upside-down. Ideal for dismantlers, breakdown trucks and engine rebuilders. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK2312 info) |
| |
| Magnetic Collection Trays |
| Stainless steel trays with O85mm magnets in non-marking cover. Ideal for storing nuts, bolts, screws, washers and sockets during disassembly/assembly. Attaches to any ferrous surface and even works upside-down. Ideal for dismantlers, breakdown trucks and engine rebuilders. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK2313 info) |
| |
| Magnetic Collection Trays |
| Stainless steel trays with O85mm magnets in non-marking cover. Ideal for storing nuts, bolts, screws, washers and sockets during disassembly/assembly. Attaches to any ferrous surface and even works upside-down. Ideal for dismantlers, breakdown trucks and engine rebuilders. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK2314 info) |
| |
| Magnetic Flexible Pick-up Tool |
| Flexible chromed shaft with Classic styled composite handle. Use with or without magnet protection cap. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6531 info) |
| |
| Magnetic Holder & Bit Set 9pc |
| Suitable for use with electric and air tools. Chrome Molybdenum S2 steel bits with magnetic adaptor. Supplied in sliding storage case. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK564 info) |
| |
| Magnetic Pick-up Combination Screwdriver Set 8pc |
| Chrome Vanadium steel driver bits with gold style finish. Steel shaft with extending magnetic pick-up. Extends from 230mm to 585mm overall. Large, comfortable contour grip. When not in use as a screwdriver telescopic magnetic pick-up extends from shaft. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK4912 info) |
| |
| Magnetic Pick-up Tool |
| Chromed metal body with pocket-clip for safe storage. Powerful magnet with 1.0kg capacity. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK651 info) |
| |
| Magnetic Tool Holder |
| Wall or tool box mounted magnetic rack. Suitable for retaining frequently used steel tools such as screwdrivers, spanners and pliers. Supplied with fixing screws. Tools not included. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK211 info) |
| |
| Magnetizer/Demagnetizer Block |
| Magnetize and demagnetize ferrous items such as screwdriver tips and tweezers. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK/M info) |
| |
| Magnetizer/Demagnetizer Screwdriver Block |
| Slimline magnetizer and demagnetizer suitable for use with screwdrivers and tweezers. Block can also be slid onto screwdriver shaft for extra pick-up power. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK/MS info) |
| |
| Mechanics Screwdriver Set 6pc |
| High grade alloy steel shafts hardened, tempered and chrome plated. Classic style grips manufactured from high impact resistant composite. Supplied with wall hanging rack. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK441 info) |
| |
| Mechanics Palm Ratchet 3/8 inchSq Drive |
| Chrome Vanadium steel 3/8 inch square drive ratchet with twist-reverse. Low profile construction gives access in confined areas. Fits neatly into the palm of your hand and great for low torque quick fastener rotation. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK262 info) |
| |
| Micro Grip Locking Clamp |
| The world's smallest locking tool grip allows perpendicular positioning of tool enabling clamping in awkward to reach spots. Ergonomically designed with smooth rounded edges allows one handed operation. Solid brass jaw and heat treated aircraft aluminium |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6817 info) |
| |
| Micro Locking Combination Wrenches |
| Chrome Vanadium steel ratchet wrenches with special heat treatment for added strength to thin wall ring design. 72-Tooth ratchet ring and gear set give ultra smooth ratchet action and means the spanner needs only be rotated 5ø to pick up next ratchet tooth. Ideal for applications where space is tight. Also features interchangeable gear sets. Available as a set of 6 wrenches in quality aluminium case or individually on presentation cards. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK639 info) |
| |
| Micro Locking Combination Wrenches |
| Chrome Vanadium steel ratchet wrenches with special heat treatment for added strength to thin wall ring design. 72-Tooth ratchet ring and gear set give ultra smooth ratchet action and means the spanner needs only be rotated 5ø to pick up next ratchet tooth. Ideal for applications where space is tight. Also features interchangeable gear sets. Available as a set of 6 wrenches in quality aluminium case or individually on presentation cards. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code RCW08 info) |
| |
| Micro Locking Combination Wrenches |
| Chrome Vanadium steel ratchet wrenches with special heat treatment for added strength to thin wall ring design. 72-Tooth ratchet ring and gear set give ultra smooth ratchet action and means the spanner needs only be rotated 5ø to pick up next ratchet tooth. Ideal for applications where space is tight. Also features interchangeable gear sets. Available as a set of 6 wrenches in quality aluminium case or individually on presentation cards. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code RCW09 info) |
| |
| Micro Locking Combination Wrenches |
| Chrome Vanadium steel ratchet wrenches with special heat treatment for added strength to thin wall ring design. 72-Tooth ratchet ring and gear set give ultra smooth ratchet action and means the spanner needs only be rotated 5ø to pick up next ratchet tooth. Ideal for applications where space is tight. Also features interchangeable gear sets. Available as a set of 6 wrenches in quality aluminium case or individually on presentation cards. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code RCW10 info) |
| |
| Micro Locking Combination Wrenches |
| Chrome Vanadium steel ratchet wrenches with special heat treatment for added strength to thin wall ring design. 72-Tooth ratchet ring and gear set give ultra smooth ratchet action and means the spanner needs only be rotated 5ø to pick up next ratchet tooth. Ideal for applications where space is tight. Also features interchangeable gear sets. Available as a set of 6 wrenches in quality aluminium case or individually on presentation cards. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code RCW11 info) |
| |
| Micro Locking Combination Wrenches |
| Chrome Vanadium steel ratchet wrenches with special heat treatment for added strength to thin wall ring design. 72-Tooth ratchet ring and gear set give ultra smooth ratchet action and means the spanner needs only be rotated 5ø to pick up next ratchet tooth. Ideal for applications where space is tight. Also features interchangeable gear sets. Available as a set of 6 wrenches in quality aluminium case or individually on presentation cards. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code RCW12 info) |
| |
| Micro Locking Combination Wrenches |
| Chrome Vanadium steel ratchet wrenches with special heat treatment for added strength to thin wall ring design. 72-Tooth ratchet ring and gear set give ultra smooth ratchet action and means the spanner needs only be rotated 5ø to pick up next ratchet tooth. Ideal for applications where space is tight. Also features interchangeable gear sets. Available as a set of 6 wrenches in quality aluminium case or individually on presentation cards. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code RCW13 info) |
| |
| Micro Locking Combination Wrenches |
| Chrome Vanadium steel ratchet wrenches with special heat treatment for added strength to thin wall ring design. 72-Tooth ratchet ring and gear set give ultra smooth ratchet action and means the spanner needs only be rotated 5ø to pick up next ratchet tooth. Ideal for applications where space is tight. Also features interchangeable gear sets. Available as a set of 6 wrenches in quality aluminium case or individually on presentation cards. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code RCW14 info) |
| |
| Micro Locking Combination Wrenches |
| Chrome Vanadium steel ratchet wrenches with special heat treatment for added strength to thin wall ring design. 72-Tooth ratchet ring and gear set give ultra smooth ratchet action and means the spanner needs only be rotated 5ø to pick up next ratchet tooth. Ideal for applications where space is tight. Also features interchangeable gear sets. Available as a set of 6 wrenches in quality aluminium case or individually on presentation cards. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code RCW15 info) |
| |
| Micro Locking Combination Wrenches |
| Chrome Vanadium steel ratchet wrenches with special heat treatment for added strength to thin wall ring design. 72-Tooth ratchet ring and gear set give ultra smooth ratchet action and means the spanner needs only be rotated 5ø to pick up next ratchet tooth. Ideal for applications where space is tight. Also features interchangeable gear sets. Available as a set of 6 wrenches in quality aluminium case or individually on presentation cards. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code RCW16 info) |
| |
| Micro Locking Combination Wrenches |
| Chrome Vanadium steel ratchet wrenches with special heat treatment for added strength to thin wall ring design. 72-Tooth ratchet ring and gear set give ultra smooth ratchet action and means the spanner needs only be rotated 5ø to pick up next ratchet tooth. Ideal for applications where space is tight. Also features interchangeable gear sets. Available as a set of 6 wrenches in quality aluminium case or individually on presentation cards. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code RCW17 info) |
| |
| Micro Locking Combination Wrenches |
| Chrome Vanadium steel ratchet wrenches with special heat treatment for added strength to thin wall ring design. 72-Tooth ratchet ring and gear set give ultra smooth ratchet action and means the spanner needs only be rotated 5ø to pick up next ratchet tooth. Ideal for applications where space is tight. Also features interchangeable gear sets. Available as a set of 6 wrenches in quality aluminium case or individually on presentation cards. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code RCW18 info) |
| |
| Micro Locking Combination Wrenches |
| Chrome Vanadium steel ratchet wrenches with special heat treatment for added strength to thin wall ring design. 72-Tooth ratchet ring and gear set give ultra smooth ratchet action and means the spanner needs only be rotated 5ø to pick up next ratchet tooth. Ideal for applications where space is tight. Also features interchangeable gear sets. Available as a set of 6 wrenches in quality aluminium case or individually on presentation cards. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code RCW19 info) |
| |
| Micro Locking Combination Wrenches |
| Chrome Vanadium steel ratchet wrenches with special heat treatment for added strength to thin wall ring design. 72-Tooth ratchet ring and gear set give ultra smooth ratchet action and means the spanner needs only be rotated 5ø to pick up next ratchet tooth. Ideal for applications where space is tight. Also features interchangeable gear sets. Available as a set of 6 wrenches in quality aluminium case or individually on presentation cards. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code RCW21 info) |
| |
| Micro Locking Combination Wrenches |
| Chrome Vanadium steel ratchet wrenches with special heat treatment for added strength to thin wall ring design. 72-Tooth ratchet ring and gear set give ultra smooth ratchet action and means the spanner needs only be rotated 5ø to pick up next ratchet tooth. Ideal for applications where space is tight. Also features interchangeable gear sets. Available as a set of 6 wrenches in quality aluminium case or individually on presentation cards. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code RCW22 info) |
| |
| Micro Locking Combination Wrenches |
| Chrome Vanadium steel ratchet wrenches with special heat treatment for added strength to thin wall ring design. 72-Tooth ratchet ring and gear set give ultra smooth ratchet action and means the spanner needs only be rotated 5ø to pick up next ratchet tooth. Ideal for applications where space is tight. Also features interchangeable gear sets. Available as a set of 6 wrenches in quality aluminium case or individually on presentation cards. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code RCW24 info) |
| |
| Micrometer Type Torque Wrenches |
| Chrome Vanadium steel ratchet head with smooth action mechanism. Calibration tolerance in accordance with BS2689/94. Scales graduated in both Nm and lb.in/lb.ft. Wrenches are individually tested to standards with ñ4% accuracy and each wrench is issued with an individually numbered test certificate. Supplied in carry-case. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code STW101 info) |
| |
| Micrometer Type Torque Wrenches |
| Chrome Vanadium steel ratchet head with smooth action mechanism. Calibration tolerance in accordance with BS2689/94. Scales graduated in both Nm and lb.in/lb.ft. Wrenches are individually tested to standards with ñ4% accuracy and each wrench is issued with an individually numbered test certificate. Supplied in carry-case. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code STW1011 info) |
| |
| Micrometer Type Torque Wrenches |
| Chrome Vanadium steel ratchet head with smooth action mechanism. Calibration tolerance in accordance with BS2689/94. Scales graduated in both Nm and lb.in/lb.ft. Wrenches are individually tested to standards with ñ4% accuracy and each wrench is issued with an individually numbered test certificate. Supplied in carry-case. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code STW102 info) |
| |
| Micrometer Type Torque Wrenches |
| Chrome Vanadium steel ratchet head with smooth action mechanism. Calibration tolerance in accordance with BS2689/94. Scales graduated in both Nm and lb.in/lb.ft. Wrenches are individually tested to standards with ñ4% accuracy and each wrench is issued with an individually numbered test certificate. Supplied in carry-case. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code STW103 info) |
| |
| Micrometer Type Torque Wrenches |
| Chrome Vanadium steel ratchet head with smooth action mechanism. Calibration tolerance in accordance with BS2689/94. Scales graduated in both Nm and lb.in/lb.ft. Wrenches are individually tested to standards with ñ4% accuracy and each wrench is issued with an individually numbered test certificate. Supplied in carry-case. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code STW104 info) |
| |
| Microtip Driver & Bit Set 20pc |
| Chrome Vanadium steel shafts. Contoured handle style with spinner top enables finger-tip control of tool on fixing. Set includes interchangeable Chrome Molybdenum screwdriver tips. Supplied in carry-case. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK9720 info) |
| |
| Microtip Driver & Bit Set 7pc |
| High quality Chrome Molybdenum driver shafts. Contoured handle with soft rubber grip for added control, includes hanging hole. Spinner top enables finger-tip control of driver. Four jaw locking coupler with knurled ring. Supplied with six 120mm double end |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK97301 info) |
| |
| Microtip Nutspinner Set 6pc |
| Chrome Vanadium steel shafts with swaged sockets. Contoured handle style with spinner top enables finger-tip control of tool on fixing. Supplied in carry-case. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK9706 info) |
| |
| Microtip Screwdriver Set 6pc |
| High quality Chrome Molybdenum driver shafts. Contoured handle with soft rubber grip for added control, includes hanging hole. Spinner top enables finger-tip control of driver. Shot blasted and blackened tips. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK97302 info) |
| |
| Microtip Screwdriver Set 8pc |
| Chrome Vanadium steel shafts with shot blasted tips. Contoured handle style with spinner top enables finger-tip control of tool on fixing. Supplied in carry-case. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK9708 info) |
| |
| Microtip TRX-Star Set 6pc |
| High quality Chrome Molybdenum driver shafts. Contoured handle with soft rubber grip for added control, includes hanging hole. Spinner top enables finger-tip control of driver. Shot blasted and blackened tips. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK97303 info) |
| |
| Mini Bolt Croppers |
| GS/TUV Approved. Chrome Vanadium steel jaws with steel grips. Suitable for materials up to HRC-35ø in hardness. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK504 info) |
| |
| Mini Circlip Plier Set 4pc |
| Spring loaded jaws manufactured from Chrome Molybdenum steel. Internal and external pliers in straight and bent profiles. Fitted with non-slip pvc grips. Suitable for 10-40mm circlips. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK8449 info) |
| |
| Mini Combination Wrench Set 8pc - Metric |
| Chrome Vanadium steel wrenches with satin finish for corrosion resistance. Suitable for intricate work on items such as carburettors, fuel pumps and alternators. Supplied on ring. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK3790 info) |
| |
| Mini Hacksaw c/w Bi-Metal Blade |
| Die-cast zinc frame for durability. Ideal for use in confined spaces. Accepts 10, 12 and even broken blades. Supplied with quality bi-metal hacksaw blade. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK8696 info) |
| |
| Mini Hacksaw with Bi-Metal Blade |
| Comfort foam dipped handle and composite frame for lightweight and easy handling make it ideal for use in confined spaces. Accepts 10, 12 and even broken blades. Supplied with quality bi-metal hacksaw blade suitable for cutting a variety of materials. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK8695 info) |
| |
| Mini Open Ended Wrench Sets 8pc |
| Drop forged steel wrenches fully hardened, tempered and chrome plated with a fully polished finish. Only 100mm long, these wrenches are suitable for intricate work such as carburettor rebuilds. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK379 info) |
| |
| Mini Open Ended Wrench Sets 8pc |
| Drop forged steel wrenches fully hardened, tempered and chrome plated with a fully polished finish. Only 100mm long, these wrenches are suitable for intricate work such as carburettor rebuilds. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK379AF info) |
| |
| Multi-Coloured Combination Wrench Set 14pc 6 - 19mm |
| Multi-coloured, drop forged, Chrome Vanadium steel combination wrenches. Hardened, tempered and chrome plated for corrosion resistance. Fully polished and coloured mirror finish. WallDriver rings. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6314 info) |
| |
| Multifunction Tool Set 4pc |
| Manufactured from top grade stainless steel. Fully hardened and tempered for long life. Includes 3 pocket tools and torch. Large Folding Pliers/Multi-Tool Closed Length: 100mm Weight: 160g Functions: 1. Needle Nose Plier 2. Regular Plier 3. Wire Cutter 4. Large Knife Blade 5. Small Knife Blade 6. Screwdriver 4mm 7. Bottle Opener 8. Screwdriver 5mm 9. Disgorger 10. De-Scaler 11. File 12. Ruler 13. Screwdriver 3mm 14. Phillips Screwdriver 15. Can Opener Large Folding Multi-Tool Closed Length: 93mm Weight: 100g Functions: 1. Large Spear Blade 2. Saw 3. De-Scaler 4. Disgorger 5. Scissors 6. Can Opener 7. Phillips Screwdriver 8. Reamer 9. File 10. Nail Cleaner 11. Needle Punch 12. Corkscrew 13. Screwdriver 14. Bottle Opener 15. Tweezers 16. Pick Small Folding Multi-Tool Closed Length: 60mm Weight: 10g Functions: 1. Knife Blade 2. Nail Cleaner 3. File 4. Scissors 5. Tweezers 6. Pick Pocket Torch Accepts 2 x AAA Batteries(Not included) |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code PK24 info) |
| |
| Multi-Tool 12 Function |
| Folding plier style multi-tool. Stainless steel construction with fully hardened and tempered elements for long life. Composite coating to the handles for added comfort and control. Functions: 1. Large Spear Blade 2. Serrated Blade 3. File 4. Screwdriver 5mm 5. Screwdriver 7mm 6. Bottle Opener 7. Pliers 8. Wire Cutters 9. Can Opener 10. Phillips Screwdriver 11. Scissors 12. Wood Saw |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK12 info) |
| |
| Multi-Tool 12 Function |
| 12 Tools in one. Manufactured from top grade, high carbon stainless steel. Fully hardened and tempered for long life. Zytel handle cheeks allow a firm and comfortable grip. Supplied with belt pouch. Functions: 1. Large Spear Blade 2. File 3. Screwdriver 4. Serrated Blade 5. Ruler 6. Disgorger 7. De-Scaler 8. Bottle Opener 9. Wire Cutters 10. Pliers 11. Combination Prybar/Handle 12. Phillips Screwdriver |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code PK12 info) |
| |
| Multi-Tool 14 Function |
| 14 Tools in one. Manufactured from stainless steel. Fully hardened and tempered for long life. Fitted with hanging ring. Functions: 1. Large Spear Blade 2. Wood Saw 3. Ruler 4. Disgorger 5. De-Scaler 6. Scissors 7. Can Opener 8. Bottle Opener 9. Screwdriver 10. Corkscrew 11. Needle/Punch 12. File 13. Reamer 14. Phillips Screwdriver |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code PK14 info) |
| |
| Multi-Tool 15 Function |
| 15 Tools in one. Manufactured from top grade, high carbon stainless steel. Fully hardened and tempered for long life. Zytel handle cheeks allow a firm and comfortable grip. Supplied with belt pouch. Functions: 1. Large Spear Blade 2. File 3. Screwdriver 4. Serrated Blade 5. Wood Saw 6. Disgorger 7. Ruler 8. De-Scaler 9. Bottle Opener 10. Pliers 11. Wire Cutters 12. Combination Prybar/Handle 13. Multi-Purpose Hook 14. Phillips Screwdriver 15. Scissors |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code PK15 info) |
| |
| Multi-Tool 16 Function |
| Hardened and tempered stainless steel construction with composite cheeks. Positive action spring loaded blades. Supplied with ring to accept lanyard or belt clip (not included). Functions: 1. Large Spear Blade 2. Wood Saw 3. Disgorger 4. De-Scaler 5. Scissors 6. Can Opener 7. Bottle Opener 8. Screwdriver 4mm 9. Corkscrew 10. Needle/Punch 11. Nail Cleaner 12. File 13. Reamer 14. Phillips Screwdriver 15. Tweezers 16. Pick |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code PK16 info) |
| |
| Multi-Tool 18 Function |
| 18 Tools in one folding plier style multi-tool with spring loaded plier jaws. Stainless steel construction with fully hardened and tempered elements for long life. Composite coating to the handles for added comfort and control. Functions: 1. Large Spear Blade 2. Bottle Opener 3. Screwdriver 5mm 4. Phillips Screwdriver 5. Ruler 170mm 6. Ruler 6-1/4 inch 7. Pliers 8. Terminal Crimpers 9. Wire Cutters 10. Saw Blade 11. Serrated Blade 12. Flat Blade 13. Screwdriver 4mm 14. Can Opener 15. Screwdriver 3mm 16. Disgorger 17. File 18. De-Scaler |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK18 info) |
| |
| Multi-Tool 24 Function |
| Folding plier style multi-tool with spring loaded plier jaws and locking blades. Converts to high torque T-handle screwdriver. Features integral storage for Chrome Vanadium driver bits. Stainless steel construction for long life. Supplied with belt storage/carry pouch. Functions: 1. Flat Nose Pliers 2. Regular Jaw Pliers 3. #1 Phillips Driver Bit 4. #2 Phillips Driver Bit 5. 3/16 inch Slotted Driver Bit 6. 1/4 inch Slotted Driver Bit 7. Bottle Opener 8. Punch/Scratch Awl 9. 1/8 inch Hex Wrench 10. 3/16 inch Hex Wrench 11. 1/4 inch Hex Wrench 12. Wood Saw Blade 13. Knife Blade 14. Inch Scale 15. Large Slotted Driver 16. Serrated Knife Blade 17. Double Cut File 18. Long Nose Pliers 19. 12 Gauge Wire Stripper 20. 16 Gauge Wire Stripper 21. Terminal Crimper 22. Wire Cutter 23. Bit Storage Chamber 24. Magnetized Bit Holder |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK24 info) |
| |
| Multi-Tool 9 Function |
| Hardened and tempered stainless steel construction with composite cheeks. Positive action spring loaded blades. Supplied with ring to accept lanyard or belt clip (not included). Functions: 1. Large Spear Blade 2. Scissors 3. Can Opener 4. Bottle Opener 5. Screwdriver 4mm 6. Corkscrew 7. Nail Cleaner 8. File 9. Phillips Screwdriver |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code PK9 info) |
| |
| Nail Assortment 1110pcs |
| Nail assortment. Partitioned cantilever case. Contents: Size (Qty); Panel Nails 2.0x25(60), Masonry Nails 25(30), 40mm(15), Tacks 1.2x11(85), 1.2x14(80), Staples 12mm(40), Wire Nails 1.2x20(180), 1.5x25(120), 2.0x40(60), 2.5x50(40) Wire Brads 1.2x20(180), 1.5x25(120), 1.8x40(60), 2.3x50(40) |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code BN1110 info) |
| |
| Nut Driver Set 6pc |
| Extra strong Chrome Molybdenum shafts with satin finish. Shot blasted and magnetised tips. Hexagonal profile design with ribbed handle for maximum power transfer from hand to fixing. Impact resistant head with hanging hole. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK4308 info) |
| |
| Nut Splitter 2pc |
| Chrome Molybdenum steel blades with forged high carbon steel body. Hardened, tempered and chrome plated for rust resistance. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK84 info) |
| |
| Nut Splitter 4pc |
| Chrome Molybdenum steel blades with forged high carbon steel grips. Hardened, tempered and chrome plated for rust resistance. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK85 info) |
| |
| Nylon Faced Dead Blow Hammer with One Piece Shaft |
| Coated die-cast head and handle of aluminium alloy with absorbent rubber grip. Fitted with two screw-in durable nylon faces. Head partially filled with steel shot for controlled blows. Spare faces available with alternative hardness. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code DBHN15 info) |
| |
| Nylon Faced Dead Blow Hammer with One Piece Shaft |
| Coated die-cast head and handle of aluminium alloy with absorbent rubber grip. Fitted with two screw-in durable nylon faces. Head partially filled with steel shot for controlled blows. Spare faces available with alternative hardness. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code DBHN20 info) |
| |
| Nylon Faced Dead Blow Hammer with One Piece Shaft |
| Coated die-cast head and handle of aluminium alloy with absorbent rubber grip. Fitted with two screw-in durable nylon faces. Head partially filled with steel shot for controlled blows. Spare faces available with alternative hardness. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code DBHN275 info) |
| |
| Nylon Faced Hammers with One Piece Shaft |
| Chrome plated zinc head with two durable white nylon faces. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code NFH15 info) |
| |
| Nylon Faced Hammers with One Piece Shaft |
| Chrome plated zinc head with two durable white nylon faces. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code NFH175 info) |
| |
| Nylon Faced Hammers with One Piece Shaft |
| Chrome plated zinc head with two durable white nylon faces. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code NFH275 info) |
| |
| Obstruction Wrench Sets 5pc |
| Drop forged Chrome Vanadium steel wrenches with bi-hex rings. Heat treated and chrome plated with industrial satin finish. Display packed. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK602 info) |
| |
| Obstruction Wrench Sets 5pc |
| Drop forged Chrome Vanadium steel wrenches with bi-hex rings. Heat treated and chrome plated with industrial satin finish. Display packed. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK603 info) |
| |
| Offset Ratchet Screwdriver Set 11pc |
| Steel construction with mechanical bit retention. Flip reverse with knurled thumbscrew. Supplied with 30mm Chrome Vanadium steel bits. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK74 info) |
| |
| Open Type Ratchet Wrench Set 8pc - Medium Stroke |
| Drop forged Chrome Vanadium steel wrenches. Hardened and tempered with fully polished chrome finish. Open jaw with ratchet configuration handles fixings with 70-80% rounded heads. Suitable for use in areas where space is at a premium. Supplied with storage rack. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6360 info) |
| |
| Open Type Ratchet Wrench Set 9pc - Short Stroke |
| Chrome Vanadium steel open ended wrenches. Hardened, tempered and chrome plated. Unique jaw configuration not only handles fixings which are 75-80% rounded off, but also features a ratchet action. Suitable for use in confined spaces. Supplied in DeLuxe storage case. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK636 info) |
| |
| Optimum Grip |
| Versatile locking plier with specially profiled jaws which combine curved, straight and flat locking grips. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6830 info) |
| |
| Optimum Grip Clamp 200mm Capacity 0-42mm |
| Versatile locking pliers with specially profiled jaws which combine curved, straight and flat locking grips. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6818 info) |
| |
| Palm Ratchet Socket & Bit Set 1/4 inchHex Drive 32pc |
| Folding type palm ratchet set delivers up to 548lb.in of torque leverage - exceeding ANSI standard. Fits in the palm or folds out for extra leverage. Chrome Vanadium steel double pawl ratchet gives smooth reliable operation. Sets include WallDriver sockets for added torque. Supplied with accessory kit in carry-case. Contents: 1/4Hex Drive Palm Ratchet,1/4Sq Dr 6pt WallDriver Sockets; 6, 7, 8, 9, 10, 11, 12mm, Bit Holder 60mm, Bit Adaptor 50mm, Driver Bits (S2) 25mm; Phillips - #0, #1, #2, #3, Slotted - 4, 5.5, 7mm, Tamper-proof TRX-Star* - T10H, T15H, T20H, T25H, T27H, T30H, T40H, Hex - 3, 4, 5, 6mm, Pozi - #0, #1, #2. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6394 info) |
| |
| Palm Ratchet Socket & Bit Set 3/8 inchSq Drive 30pc |
| Folding type palm ratchet set delivers up to 1800lb.in of torque leverage - exceeding ANSI standard. Fits in the palm or folds out for extra leverage. Chrome Vanadium steel double pawl ratchet gives smooth reliable operation. Sets include WallDriver sockets for added torque. Supplied with accessory kit in carry-case. Contents: 3/8Sq Drive Palm Ratchet, 3/8Sq Dr 12pt WallDriver Sockets; 8, 10, 11, 12, 13mm, Extension Bar 150mm, Magnetic Bit Holder, Driver Bits (S2) 25mm; Phillips - #0, #1, #2, #3, Slotted - 4, 5.5, 7mm, Tamper-proof TRX-Star* - T10H, T15H, T20H, T25H, T27H, T30H, T40H, Hex - 3, 4, 5, 6mm, Pozi - #0, #1, #2. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6395 info) |
| |
| Parallel Pin Punch Set 6pc Long Style |
| Hardened, tempered and fully polished Chrome Vanadium steel long style punches. Set supplied with composite retainer. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK9128L info) |
| |
| Parallel Pin Punch Set 4pc |
| Chrome Vanadium steel punches with satin nickel plated finish. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK9122 info) |
| |
| Parallel Pin Punch Set 6pc |
| Chrome Vanadium steel punches with satin nickel plated finish. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK9123 info) |
| |
| Parallel Pin Punch Set 6pc |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK9126 info) |
| |
| Parallel Pin Punch Set 6pc |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK9128 info) |
| |
| Parallel Roll-Pin Punch Set AF 9pc |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK9109 info) |
| |
| Parallel Roll-Pin Punch Set Metric 9pc |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK9109M info) |
| |
| Pear-head Ratchet Wrench 3/4 inchSq Drive |
| Hardened and tempered steel ratchet wrench. Slim style contoured handle shaft. Features include flip-reverse and chemically blackened ratchet head for corrosion resistance. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK669 info) |
| |
| Pin Hammers with Hickory Shaft |
| Drop forged carbon steel head. Induction hardened and tempered with polished face and cheek. Fitted with straight grain hickory shaft. Manufactured and tested to BS876. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code BPH04 info) |
| |
| Pipe Cutter O3-50mm |
| Heavy duty die-cast body with hardened steel blade for cutting steel and cast iron pipe. Two wide rollers for extra control with less burring leaving a clean cut. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK5062 info) |
| |
| Plier Counter-top Display Stand |
| Counter-top display with selection of 44 popular pliers. Look out for our counter-top display units at your local distributors, offering a full range of individual pliers. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code PLIER/PAC info) |
| |
| Plier Set 3pc |
| Manufactured from drop forged, heat treated steel with induction hardened cutting edges. Fully polished finish with non-slip foam cushion-grip handles. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK546 info) |
| |
| Plug-Weld Pliers |
| Awarded `Top 20 Tools of 1995' accolade by US Motor magazine. Suitable for use when Mig spot-welding and eliminates burn through on thin panel work. Features replaceable Copper alloy pad which has a low affinity for molten weld and good heat dissipation properties. Incorporates features from locking plier range. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6831 info) |
| |
| Power Bit Set 32pc 50mm |
| High quality Chrome Vanadium steel bit set with sand blast finish. 1/4 inch Hex x 50mm long. Supplied in case for ease of use and storage. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK111 info) |
| |
| Power Tool Bit Set 22pc |
| Chrome Molybdenum S2 Steel with gold finish. Includes magnetic bit holder and socket adaptor. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK5588 info) |
| |
| Power Tool Bit Set Pozi #2 75mm Long 5pc |
| Manufactured from high quality Chrome Vanadium steel. 75mm Length shaft enables easier access to fixings in recessed areas. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK5591 info) |
| |
| Power Tool Bit Set Pozi/Slotted 75mm Long 5pc |
| Manufactured from high quality Chrome Vanadium steel. 75mm Length shaft enables easier access to fixings in recessed areas. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK5592 info) |
| |
| Power Tool Bit Sets |
| Super hard Chrome Molybdenum S2 steel bits with striking gold effect finish. Includes magnetic adaptor with 6mm hex shank and supplied in rotary bit dispenser. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK554 info) |
| |
| Power Tool Bit Sets |
| Super hard Chrome Molybdenum S2 steel bits with striking gold effect finish. Includes magnetic adaptor with 6mm hex shank and supplied in rotary bit dispenser. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK555 info) |
| |
| Power Tool Bit Sets |
| Super hard Chrome Molybdenum S2 steel bits with striking gold effect finish. Includes magnetic adaptor with 6mm hex shank and supplied in rotary bit dispenser. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK556 info) |
| |
| Power Tool Bit Sets |
| Super hard Chrome Molybdenum S2 steel bits with striking gold effect finish. Includes magnetic adaptor with 6mm hex shank and supplied in rotary bit dispenser. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK557 info) |
| |
| Power Tool/Security Bit Set 100pc |
| One of the most comprehensive driver, security and tamper-proof bit sets available. High quality Chrome Vanadium steel bits. Suitable for a wide variety of applications. Supplied in carry-case. Contents: Bits; TRX-Star* Security(9pcs), TRX-Star*(9pcs), Hex - Metric(9pcs), Hex - Imperial(9pcs), Flat Screwdriver(9pcs), Pozi Screwdriver(8pcs), Phillips Screwdriver(8pcs), Hex Security - Metric(6pcs), Hex Security - Imperial(6pcs), Tri-Wing(4pcs), Square(4pcs), Spanner(4pcs), Torq(3pcs), Spline(3pcs), Butterfly(3pcs). Special Hook Bit, Magnetic Extension/Bit Holder, 1/4Dr Extension, 1/4Dr Socket Adaptor(2pcs). |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK2100 info) |
| |
| Power Tool/Security Bit Set 75mm Long 32pc |
| Comprehensive set of security and driver bits manufactured from high quality Chrome Vanadium steel. 75mm hex shank enables easy access into recessed fixings. Supplied with rubber storage case. Contents: Spanner; 6, 8, 10mm, Security TRX-Star*; T6, T8, T10, T15, T20, T25, T27, T30, T35, T40, Security Hex; 2, 2.5, 3, 4, 5, 6mm, Torq; 6, 8, 10mm, Spline; M5, M6, M8, Pozi; #1, #2, Phillips; #1, #2, Slotted; 4, 5, 6mm. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK2032 info) |
| |
| Power Tool/Security Bit Set 75mm Long 50pc |
| A comprehensive set of 75mm long, high quality, Chrome Vanadium steel driver bits. Includes hex, slotted, Pozi, Phillips and TRX-Star* security bits. Suitable for a wide variety of applications. Supplied in carry-case. Contents: Bits; TRX-Star* Security(10pcs), TRX-Star*(5pcs), Hex - Metric(3pcs), Flat Screwdriver(3pcs), Pozi Screwdriver(2pcs), Phillips Screwdriver(2pcs), Hex Tamper-proof(6pcs), Tri-Wing(3pcs), Square(2pcs), Spanner(4pcs), Torq(3pcs), Spline(3pcs), Butterfly(3pcs), Magnetic Extension/Bit Holder. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK2050 info) |
| |
| Powermaxr Screwdriver Set 11pc |
| Set includes telescopic magnetic pick-up tool and 2 x fully insulated VDE approved electrical screwdrivers for installation work. Contents: Slotted; 3.2 x 80, 5.5 x 125, 6.5 x 150, 8 x 150mm, Phillips; #1 x 75, #2 x 100mm, Pozi; #1 x 75, #2 x 100mm, VDE Approved Insulated Drivers; Slotted - 4 x 100mm, Phillips - #1x100mm, Telescopic Magnetic Pick-Up; 115-485mm |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK4869 info) |
| |
| Powermaxr Screwdriver Set 21pc |
| Supplied in a plastic carry-case. Contents: Slotted; 6 x 100, 8 x 150mm, Phillips; #1 x 75, #2 x 100mm, Pozi; #1 x 75, #2 x 100mm, Bit Holder and Bits; Hex Bits - 2, 2.5, 3, 4, 5, 5.5, 6mm, Slotted - 4, 5mm, Pozi - #3, Phillips - #3, TRX-Star* - T15, T20, T25 |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK4873 info) |
| |
| Powermaxr Screwdriver Set 5pc |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK4865 info) |
| |
| Powermaxr Screwdriver Set 7pc |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK4866 info) |
| |
| Powermaxr Screwdriver Set 8pc with Rack |
| Supplied with wall mounting rack. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK4871 info) |
| |
| Powermaxr Screwdrivers |
| Counter-top display with selection of 96 popular drivers. Includes a double-ended demonstrator to show the superior grip qualities of the Powermaxr range. Stock includes 6 of each Model No. AK4860/1 to AK4860/16. Look out for our counter-top display units at your local distributors, offering a full range of individual Powermaxr screwdrivers. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK4860 info) |
| |
| Powermaxr Screwdrivers |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK4860/1 info) |
| |
| Powermaxr Screwdrivers |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK4860/10 info) |
| |
| Powermaxr Screwdrivers |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK4860/11 info) |
| |
| Powermaxr Screwdrivers |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK4860/12 info) |
| |
| Powermaxr Screwdrivers |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK4860/13 info) |
| |
| Powermaxr Screwdrivers |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK4860/14 info) |
| |
| Powermaxr Screwdrivers |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK4860/15 info) |
| |
| Powermaxr Screwdrivers |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK4860/16 info) |
| |
| Powermaxr Screwdrivers |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK4860/17 info) |
| |
| Powermaxr Screwdrivers |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK4860/18 info) |
| |
| Powermaxr Screwdrivers |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK4860/2 info) |
| |
| Powermaxr Screwdrivers |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK4860/3 info) |
| |
| Powermaxr Screwdrivers |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK4860/4 info) |
| |
| Powermaxr Screwdrivers |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK4860/5 info) |
| |
| Powermaxr Screwdrivers |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK4860/6 info) |
| |
| Powermaxr Screwdrivers |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK4860/7 info) |
| |
| Powermaxr Screwdrivers |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK4860/8 info) |
| |
| Powermaxr Screwdrivers |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK4860/9 info) |
| |
| Precision Plier & Screwdriver Set 8pc |
| Long pattern SAE8650 Chrome Molybdenum alloy steel shafts with satin finish and hardened, blackened tips. Composite handles with colour coded swivel heads for extra control. Stainless steel miniature pliers with spring loaded handles and chubby grips for fine control. Nippers suitable for cutting plastics (max 3mm) and copper wires (max O1.2mm). Also includes awl/probe and O40mm magnifying glass. Supplied in lined carry-case. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK974 info) |
| |
| Precision Plier & Screwdriver Set 9pc |
| SAE8650 Chrome Molybdenum alloy steel shafts with satin finish and hardened, blackened tips. Composite handles with colour coded swivel heads for extra control. Stainless steel miniature pliers with spring loaded handles and chubby grips for delicate control. Nippers suitable for cutting plastics (max 3mm) and copper wires (max O1.2mm). Also includes O40mm magnifying glass. Supplied in lined carry-case. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK973 info) |
| |
| Precision Plier Set 2pc |
| Stainless steel miniature plier set with spring loaded handles and chubby grips for delicate control. Nippers suitable for cutting plastics (max 3mm) and copper wires (max O1.2mm). |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK970 info) |
| |
| Precision Plier Set 5pc |
| Stainless steel miniature plier set with spring loaded handles and chubby grips for delicate control. Suitable for a variety of precision jobs including carburettor repairs. Nippers suitable for cutting plastics (max 3mm) and copper wires (max O1.2mm). |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK971 info) |
| |
| Precision Screwdriver & Tweezer Set 16pc |
| Hardened and tempered nickel alloy steel screwdriver shafts with jewellers pattern chromed handles and swivel heads. Larger sizes drilled to take a tommy bar (supplied). Stainless steel tweezers. Supplied in carry-case. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK975 info) |
| |
| Precision Tool Set 21pc |
| Chrome Molybdenum steel long pattern and jeweller's pattern drivers. Hardened and tempered. All drivers with swivel heads for finger-tip control. Long pattern drivers are colour coded. Set includes cutting nippers, stainless steel tweezers and magnifying glass. Supplied in deluxe presentation case. Contents: Long Pattern Drivers; Slotted - 2.4 x 75, 3.0 x 100, 3.8 x 150mm, Phillips - #0 x 75, #1 x 100, #1 x 150mm, Jewellers Pattern Drivers; Slotted - 1.0, 1.4, 2.0, 2.4, 3.0, 3.8mm, Phillips - #0000, #000, #00, #0, 1, #1.1, 90mm Diagonal Cutting Nippers, 160mm Bent Nose Tweezers, Magnifying Glass O40mm. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK977 info) |
| |
| Precision Tweezer Set 6pc |
| Stainless steel tweezers suitable for use on computers, telecoms, TV, radio, glasses, clocks, watches, cameras, VCR and CD. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK976 info) |
| |
| Professional 12 inch Hacksaw |
| Die-cast handle and stock with blade storage facility. No tools required to change blade. Twin (90ø and 45ø) blade positions for comfortable and accurate cutting. Compass saw capability. Supplied with quality bi-metal hacksaw blade suitable for cutting a variety of materials. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK869 info) |
| |
| Professional Screwdriver Set 22pc |
| Chrome Vanadium steel shafts fully hardened, tempered and chrome plated. Driver tips are hardened, shot blasted and magnetized. Larger sizes fitted with hex drive bolster. Classic type handles manufactured from high impact resistant material. Contents: Slotted; 3.2 x 75, 6 x 38, 4 x 100, 5 x 100, 5 x 150, 6 x 150, 6 x 100, 8 x 200, 9 x 250, 4 x 110mm(with Screw Holder), Phillips; #0-32 x 75, #2-6 x 38, #1-5 x 75, #3-8 x 150, #2-6 x 100mm, TRX-Star*; T10-4 x 75, T15-5 x 100, T20-5 x 100, T25-6 x 100, T30-6 x 115mm, Tack Puller, Scratch Awl |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK372 info) |
| |
| Professional Screwdriver Set 8pc |
| Chrome Vanadium steel shafts fully hardened, tempered and chrome plated. Driver tips are extra hard, shot blasted and magnetized. Larger sizes fitted with hex drive bolster. Classic type handles manufactured from high impact resistant material. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK71 info) |
| |
| Punch & Chisel Set 12pc |
| Contents: Centre Punches; #1x8x100, #2x9.5x120mm, Taper Pin Punches; O3x9.5x120, O4x9.5x120, O5x9.5x120mm, Parallel Pin Punches; O2x8x115, O4x9.5x150, O6x12.7x180mm, Cold Chisels; 5x9.5x130, 7x12.7x165mm, Utility Chisel x 2, Tool Roll |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK9129 info) |
| |
| Punch & Chisel Set 12pc |
| Manufactured from hardened and tempered Chrome Vanadium steel. Chemically blackened for corrosion resistance. Vinyl grip handles. Supplied in tool roll. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK92 info) |
| |
| Punch & Chisel Set 25pc |
| A comprehensive 25pc set made from best quality Chrome Vanadium steel. Hardened, tempered and finished. Supplied in tool roll. Contents: Pin Punches; 3/32, 1/8 (125mm length), 5/32, 3/16, 7/32, 1/4 (150mm length), Centre Punches; 32, 34mm (125mm length), 35mm (150mm length), Taper Punches; 3/32, 1/8, 3/16, 7/32, 1/4 (150mm length), 1/8, 3/16, 1/4 (250mm length), Chisels; 3/8, 1/2 (150mm length), 5/8, 3/4 (175mm length), 7/8, 1 (200mm length), 7/8 (310mm length), Utility Chisel |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK9298 info) |
| |
| Punch & Chisel Set 4pc |
| Manufactured from Chrome Vanadium steel. Hardened, tempered and chemically blackened for corrosion resistance. Vinyl grip handles. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK9297 info) |
| |
| Punch & Chisel Set 5pc |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK9127 info) |
| |
| Punch and Chisel Set 17pc |
| Contents: Long Pin Punches; 3x9.5x200mm, 4x9.5x200mm, 5x9.5x200mm, 6x9.5x200mm, 8x12.7x200mm, 10x12.7x200mm. Pin Punches; 2x8x115mm, 3x8x125mm, 4x9.5x150mm,5x9.5x165mm, 6x12.7x180mm, 8x12.7x180mm. Taper Punches; 2x9.5x120mm, 3x9.5x120mm, 4x9.5x120mm, 5x9. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK9130 info) |
| |
| Punch and Chisel Set 7pc |
| Manufactured from hardened and tempered Chrome Vanadium Steel. Chemically blackened for corrosion resistance. Vinyl grip handles. Supplied in tool roll. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK91 info) |
| |
| Radio Pliers DIN 5236/ISO 5745/6 |
| Long nose pliers with double hardened cutters to HRC-60ø. Suitable for medium/hard wires. Wire cutting capacities quoted according to DIN/ISO 5744. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK8313 info) |
| |
| Radio Pliers DIN 5236/ISO 5745/6 |
| Long nose pliers with double hardened cutters to HRC-60ø. Suitable for medium/hard wires. Wire cutting capacities quoted according to DIN/ISO 5744. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK8315 info) |
| |
| Radio Pliers DIN 5236/ISO 5745/6 |
| Long nose pliers with double hardened cutters to HRC-60ø. Suitable for medium/hard wires. Wire cutting capacities quoted according to DIN/ISO 5744. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK8330 info) |
| |
| Radio Pliers DIN 5236/ISO 5745/6 |
| Long nose pliers with double hardened cutters to HRC-60ø. Suitable for medium/hard wires. Wire cutting capacities quoted according to DIN/ISO 5744. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK8332 info) |
| |
| Ratchet Driver & Power Bit Set 36pc |
| Chrome Molybdenum steel driver bits with 10 tooth ratchet driver body. Classic type driver handle. Supplied in storage case. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK374 info) |
| |
| Ratchet Ring Wrench Set 5pc - Metric |
| Made in the USA to meet and exceed Federal Specification number GGG-W-001405 in torque capacity. Handle cheeks made from heat treated 1050 carbon steel with nickel chrome plating. Wrench wheels made to ANSI tolerances and feature WallDriver rings. Fully reversible. Available in flat or 25ø offset configurations. Supplied in tool caddy. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK2271 info) |
| |
| Ratchet Ring Wrench Set 5pc - Metric |
| Made in the USA to meet and exceed Federal Specification number GGG-W-001405 in torque capacity. Handle cheeks made from heat treated 1050 carbon steel with nickel chrome plating. Wrench wheels made to ANSI tolerances and feature WallDriver rings. Fully reversible. Available in flat or 25ø offset configurations. Supplied in tool caddy. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK2272 info) |
| |
| Ratchet Speed Wrench 3/8 inch Square Drive |
| High quality Chrome Vanadium steel ratchet with smooth satin finish. Locking switch allows ratchet head to be locked in any position through 360ø radius allowing access into hard to reach areas. Head can also rotate freely though 360ø to allow speed action. Pear head ratchet with flip reverse and push button quick socket release. Long ergonomic cranked handle allows greater comfort and flexibility. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK5691 info) |
| |
| Ratchet T-Handle Driver Set 10pc |
| One-piece, Chrome Vanadium steel drive shaft gives extra strength. High quality bits can be used with air and electric power tools. Double pawl ratchet T-bar with lock and reverse gives added torque capacity. Supplied in tool tray. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6151 info) |
| |
| Ratchet T-Handle Socket Set 10pc |
| One-piece, Chrome Vanadium steel drive shaft and socket gives extra strength. WallDriver socket drives damaged fixings and permits up to 30% more torque to be applied to intact fixings. Double pawl ratchet T-bar with lock and reverse gives added torque capacity. Supplied in tool tray. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6153 info) |
| |
| Ratchet T-Handle TRX-Star* Driver Set 10pc |
| One-piece, Chrome Vanadium steel drive shaft and socket gives extra strength. High quality bits can be used with air and electric power tools. Double pawl ratchet T-bar with lock and reverse gives added torque capacity. Supplied in tool tray. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6150 info) |
| |
| Ratchet T-Handle TRX-Star* Socket Set 10pc |
| One-piece, Chrome Vanadium steel drive shaft and socket gives extra strength. High quality bits can be used with air and electric power tools. Double pawl ratchet T-bar with lock and reverse gives added torque capacity. Supplied in tool tray. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6152 info) |
| |
| Ratchet Wrench 1/2 inch Square Drive |
| Chrome Vanadium steel single pawl ratchet wrenches, hardened and tempered, with fully polished mirror chrome finish. Features pear head with flip reverse, push-button quick release and bi-material handle with anti-slip comfort grip. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK593 info) |
| |
| Ratchet Wrench 1/2 inch Square Drive |
| Ergonomically designed Chrome Vanadium steel reversible ratchet wrenches with comfort handle and anti-slip grip. Hardened, tempered with polished chrome finish. Features ultra smooth 72-tooth ratchet action allowing ratcheting in increments of 5ø for ease |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK968 info) |
| |
| Ratchet Wrench 1/2 inch Square Drive 375mm Pear Head Flip Reverse |
| Chrome Vanadium steel ratchet wrenches. Hardened, tempered and finished in deep polished high chrome. Slim style contoured handle with pear-head design. Features include flip-reverse and socket quick release mechanism. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK662L info) |
| |
| Ratchet Wrench 1/4 inch Square Drive |
| Chrome Vanadium steel single pawl ratchet wrenches, hardened and tempered, with fully polished mirror chrome finish. Features pear head with flip reverse, push-button quick release and bi-material handle with anti-slip comfort grip. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK591 info) |
| |
| Ratchet Wrench 1/4 inch Square Drive |
| Ergonomically designed Chrome Vanadium steel reversible ratchet wrenches with comfort handle and anti-slip grip. Hardened, tempered with polished chrome finish. Features ultra smooth 72-tooth ratchet action allowing ratcheting in increments of 5ø for ease |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK966 info) |
| |
| Ratchet Wrench 3/8 inch Square Drive |
| Chrome Vanadium steel single pawl ratchet wrenches, hardened and tempered, with fully polished mirror chrome finish. Features pear head with flip reverse, push-button quick release and bi-material handle with anti-slip comfort grip. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK592 info) |
| |
| Ratchet Wrench 3/8 inch Square Drive |
| Ergonomically designed Chrome Vanadium steel reversible ratchet wrenches with comfort handle and anti-slip grip. Hardened, tempered with polished chrome finish. Features ultra smooth 72-tooth ratchet action allowing ratcheting in increments of 5ø for ease |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK967 info) |
| |
| Ratchet Wrench 3/8 inch Square Drive 300mm Pear Head Flip Reverse |
| Chrome Vanadium steel ratchet wrenches. Hardened, tempered and finished in deep polished high chrome. Slim style, contoured handle with pear-head design. Features include flip-reverse and socket quick release mechanism. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK661L info) |
| |
| Ratchet Wrench 3/8 inch Square Drive Stubby |
| Ergonomically designed, Chrome Vanadium steel, reversible ratchet wrench with comfort handle and anti-slip grip. Hardened, tempered with polished chrome finish. Stubby design improves access in confined spaces. Features ultra smooth 72 tooth ratchet actio |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK967S info) |
| |
| Ratchet Wrench Set 3pc |
| Ergonomically designed Chrome Vanadium steel reversible ratchet wrenches with comfort handle and anti-slip grip. Hardened, tempered with polished chrome finish. Features ultra smooth 72 tooth ratchet action allowing ratcheting in increments of 5ø for grea |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK969 info) |
| |
| Ratchet Wrench Sets 5pc |
| Chrome Vanadium steel rings, fully hardened and tempered. 12 Point format with rocker type ratchet reverse mechanism. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK226 info) |
| |
| Ratchet Wrench Sets 5pc |
| Chrome Vanadium steel rings, fully hardened and tempered. 12 Point format with rocker type ratchet reverse mechanism. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK227 info) |
| |
| Ratchet Wrenches |
| Chrome Vanadium steel ratchet wrenches. Hardened, tempered and finished in deep polished high chrome. Slim style contoured handle with pear-shaped design. Features include flip-reverse and socket quick release mechanism. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK660 info) |
| |
| Ratchet Wrenches |
| Chrome Vanadium steel ratchet wrenches. Hardened, tempered and finished in deep polished high chrome. Slim style contoured handle with pear-shaped design. Features include flip-reverse and socket quick release mechanism. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK661 info) |
| |
| Ratchet Wrenches |
| Chrome Vanadium steel ratchet wrenches. Hardened, tempered and finished in deep polished high chrome. Slim style contoured handle with pear-shaped design. Features include flip-reverse and socket quick release mechanism. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK662 info) |
| |
| Ratchet Wrenches |
| Chrome Vanadium steel ratchet wrenches. Hardened, tempered and plated. Features include flip-reverse, socket quick release button, satin chrome finish for corrosion resistance and rubber-grip handle. GS/TUV approved. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK703 info) |
| |
| Ratchet Wrenches |
| Chrome Vanadium steel ratchet wrenches. Hardened, tempered and plated. Features include flip-reverse, socket quick release button, satin chrome finish for corrosion resistance and rubber-grip handle. GS/TUV approved. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK704 info) |
| |
| Ratchet Wrenches |
| Chrome Vanadium steel ratchet wrenches. Hardened, tempered and plated. Features include flip-reverse, socket quick release button, satin chrome finish for corrosion resistance and rubber-grip handle. GS/TUV approved. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK705 info) |
| |
| Repousse Hammer |
| Suitable for planishing and shaping sheet metal. Use with sandbag or small anvil for best results. Ball pein permits use for riveting. Dried, seasoned and contoured hardwood handle for comfort and control. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code RPH16 info) |
| |
| Reversible Ratchet Combination Wrenches |
| High quality slim style Chrome Vanadium steel wrenches. Hardened, tempered and mirror finished for corrosion resistance. 72-Tooth Chrome molybdenum WallDriver ratchet ring with flip reverse combines ultra-smooth operation and durability with simple and effective reverse action. Meets and exceeds ISO1711, DIN899 and BS3555 torque standards - by our reckoning, the strongest range of ratchet wrenches on the market. 15§ Offset keeps knuckles clear of obstructions. Ideal for use where space is at a premium. Available in a set of 11 wrenches on storage rack or individually on presentation hangers. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6381 info) |
| |
| Reversible Ratchet Combination Wrenches |
| High quality slim style Chrome Vanadium steel wrenches. Hardened, tempered and mirror finished for corrosion resistance. 72-Tooth Chrome Molybdenum WallDriver ratchet ring with flip reverse combines ultra-smooth operation and durability with simple and effective reverse action. Meets and exceeds ISO1711, DIN899 and BS3555 torque standards - by our reckoning, the strongest range of ratchet wrenches on the market. 15§ Offset keeps knuckles clear of obstructions. Ideal for use where space is at a premium. Available as a set of 11 wrenches on storage rack or individually on presentation hangers. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code RRCW08 info) |
| |
| Reversible Ratchet Combination Wrenches |
| High quality slim style Chrome Vanadium steel wrenches. Hardened, tempered and mirror finished for corrosion resistance. 72-Tooth Chrome Molybdenum WallDriver ratchet ring with flip reverse combines ultra-smooth operation and durability with simple and effective reverse action. Meets and exceeds ISO1711, DIN899 and BS3555 torque standards - by our reckoning, the strongest range of ratchet wrenches on the market. 15§ Offset keeps knuckles clear of obstructions. Ideal for use where space is at a premium. Available as a set of 11 wrenches on storage rack or individually on presentation hangers. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code RRCW09 info) |
| |
| Reversible Ratchet Combination Wrenches |
| High quality slim style Chrome Vanadium steel wrenches. Hardened, tempered and mirror finished for corrosion resistance. 72-Tooth Chrome Molybdenum WallDriver ratchet ring with flip reverse combines ultra-smooth operation and durability with simple and effective reverse action. Meets and exceeds ISO1711, DIN899 and BS3555 torque standards - by our reckoning, the strongest range of ratchet wrenches on the market. 15§ Offset keeps knuckles clear of obstructions. Ideal for use where space is at a premium. Available as a set of 11 wrenches on storage rack or individually on presentation hangers. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code RRCW10 info) |
| |
| Reversible Ratchet Combination Wrenches |
| High quality slim style Chrome Vanadium steel wrenches. Hardened, tempered and mirror finished for corrosion resistance. 72-Tooth Chrome Molybdenum WallDriver ratchet ring with flip reverse combines ultra-smooth operation and durability with simple and effective reverse action. Meets and exceeds ISO1711, DIN899 and BS3555 torque standards - by our reckoning, the strongest range of ratchet wrenches on the market. 15§ Offset keeps knuckles clear of obstructions. Ideal for use where space is at a premium. Available as a set of 11 wrenches on storage rack or individually on presentation hangers. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code RRCW11 info) |
| |
| Reversible Ratchet Combination Wrenches |
| High quality slim style Chrome Vanadium steel wrenches. Hardened, tempered and mirror finished for corrosion resistance. 72-Tooth Chrome Molybdenum WallDriver ratchet ring with flip reverse combines ultra-smooth operation and durability with simple and effective reverse action. Meets and exceeds ISO1711, DIN899 and BS3555 torque standards - by our reckoning, the strongest range of ratchet wrenches on the market. 15§ Offset keeps knuckles clear of obstructions. Ideal for use where space is at a premium. Available as a set of 11 wrenches on storage rack or individually on presentation hangers. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code RRCW12 info) |
| |
| Reversible Ratchet Combination Wrenches |
| High quality slim style Chrome Vanadium steel wrenches. Hardened, tempered and mirror finished for corrosion resistance. 72-Tooth Chrome Molybdenum WallDriver ratchet ring with flip reverse combines ultra-smooth operation and durability with simple and effective reverse action. Meets and exceeds ISO1711, DIN899 and BS3555 torque standards - by our reckoning, the strongest range of ratchet wrenches on the market. 15§ Offset keeps knuckles clear of obstructions. Ideal for use where space is at a premium. Available as a set of 11 wrenches on storage rack or individually on presentation hangers. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code RRCW13 info) |
| |
| Reversible Ratchet Combination Wrenches |
| High quality slim style Chrome Vanadium steel wrenches. Hardened, tempered and mirror finished for corrosion resistance. 72-Tooth Chrome Molybdenum WallDriver ratchet ring with flip reverse combines ultra-smooth operation and durability with simple and effective reverse action. Meets and exceeds ISO1711, DIN899 and BS3555 torque standards - by our reckoning, the strongest range of ratchet wrenches on the market. 15§ Offset keeps knuckles clear of obstructions. Ideal for use where space is at a premium. Available as a set of 11 wrenches on storage rack or individually on presentation hangers. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code RRCW14 info) |
| |
| Reversible Ratchet Combination Wrenches |
| High quality slim style Chrome Vanadium steel wrenches. Hardened, tempered and mirror finished for corrosion resistance. 72-Tooth Chrome Molybdenum WallDriver ratchet ring with flip reverse combines ultra-smooth operation and durability with simple and effective reverse action. Meets and exceeds ISO1711, DIN899 and BS3555 torque standards - by our reckoning, the strongest range of ratchet wrenches on the market. 15§ Offset keeps knuckles clear of obstructions. Ideal for use where space is at a premium. Available as a set of 11 wrenches on storage rack or individually on presentation hangers. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code RRCW15 info) |
| |
| Reversible Ratchet Combination Wrenches |
| High quality slim style Chrome Vanadium steel wrenches. Hardened, tempered and mirror finished for corrosion resistance. 72-Tooth Chrome Molybdenum WallDriver ratchet ring with flip reverse combines ultra-smooth operation and durability with simple and effective reverse action. Meets and exceeds ISO1711, DIN899 and BS3555 torque standards - by our reckoning, the strongest range of ratchet wrenches on the market. 15§ Offset keeps knuckles clear of obstructions. Ideal for use where space is at a premium. Available as a set of 11 wrenches on storage rack or individually on presentation hangers. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code RRCW16 info) |
| |
| Reversible Ratchet Combination Wrenches |
| High quality slim style Chrome Vanadium steel wrenches. Hardened, tempered and mirror finished for corrosion resistance. 72-Tooth Chrome Molybdenum WallDriver ratchet ring with flip reverse combines ultra-smooth operation and durability with simple and effective reverse action. Meets and exceeds ISO1711, DIN899 and BS3555 torque standards - by our reckoning, the strongest range of ratchet wrenches on the market. 15§ Offset keeps knuckles clear of obstructions. Ideal for use where space is at a premium. Available as a set of 11 wrenches on storage rack or individually on presentation hangers. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code RRCW17 info) |
| |
| Reversible Ratchet Combination Wrenches |
| High quality slim style Chrome Vanadium steel wrenches. Hardened, tempered and mirror finished for corrosion resistance. 72-Tooth Chrome Molybdenum WallDriver ratchet ring with flip reverse combines ultra-smooth operation and durability with simple and effective reverse action. Meets and exceeds ISO1711, DIN899 and BS3555 torque standards - by our reckoning, the strongest range of ratchet wrenches on the market. 15§ Offset keeps knuckles clear of obstructions. Ideal for use where space is at a premium. Available as a set of 11 wrenches on storage rack or individually on presentation hangers. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code RRCW18 info) |
| |
| Reversible Ratchet Combination Wrenches |
| High quality slim style Chrome Vanadium steel wrenches. Hardened, tempered and mirror finished for corrosion resistance. 72-Tooth Chrome Molybdenum WallDriver ratchet ring with flip reverse combines ultra-smooth operation and durability with simple and effective reverse action. Meets and exceeds ISO1711, DIN899 and BS3555 torque standards - by our reckoning, the strongest range of ratchet wrenches on the market. 15§ Offset keeps knuckles clear of obstructions. Ideal for use where space is at a premium. Available as a set of 11 wrenches on storage rack or individually on presentation hangers. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code RRCW19 info) |
| |
| Ribe Key Set 7pc |
| Drop forged Chrome Vanadium S2 steel, hardened and tempered for added strength. Double ended shank with polished matt finish. Ribe profile suitable for work on Italian vehicles including Fiat, Alfa Romeo and Lancia. Supplied with plastic retaining clip. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6177 info) |
| |
| Rubber Grip Ratchet Wrenches |
| Chrome Vanadium steel ratchet wrenches. Hardened, tempered and satin chrome finished. Comfortable rubber grip handle with pear-shaped head design. Flip-reverse and socket quick-release mechanism. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK676 info) |
| |
| Rubber Grip Ratchet Wrenches |
| Chrome Vanadium steel ratchet wrenches. Hardened, tempered and satin chrome finished. Comfortable rubber grip handle with pear-shaped head design. Flip-reverse and socket quick-release mechanism. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK677 info) |
| |
| Rubber Grip Ratchet Wrenches |
| Chrome Vanadium steel ratchet wrenches. Hardened, tempered and satin chrome finished. Comfortable rubber grip handle with pear-shaped head design. Flip-reverse and socket quick-release mechanism. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK678 info) |
| |
| Rubber O-Rings 225pcs |
| Rubber O-Ring assortment in popular sizes. Partitioned case. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code BOR225 info) |
| |
| Rubber O-Rings 419pcs |
| Manufactured from Buna-N and approved to American Standard TM OIL #1 & #3 Laboratory Test. Partitioned interlacing case. Contents: 3x1.5, 4.4x2, 5x2, 7x1.5, 10x1.5, 13x1.5, 10x2.5, 11x2.5, 13x2.5, 14x2.5, 16x2.5, 18x2.5, 19x2.5, 21x2.5, 22x2.5, 18x3.5, 20x3.5, 22x3.5, 23.5x3.5, 25x3.5, 26.5x3.5, 28x3.5, 30x3.5, 31x3.5, 33x3.5, 34.5x3.5, 36x3.5, 38x3.5, 41x3.5, 44x3.5, 47x3.5, 50x3.5mm |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code BOR419 info) |
| |
| Safety Wire Twister |
| Carbon Steel construction. Suitable for safety wiring all types of fasteners, caps, drain cocks and valves. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK2092 info) |
| |
| Screwdriver & Bit Set 29pc |
| Composite handle with magnetic bit holder. Bit storage handle with twist off cap. High quality S2 steel bits. Supplied in handy storage case. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK469 info) |
| |
| Screwdriver & Flexible Nutdriver Set 11pc |
| Unique combination tool with flexible extending hose clip driver. Supplied with 9pc bit and socket set. Socket sizes cover popular hose clips as fitted to: Rover/BMW - 5mm, Ford - 6mm. Includes standard 7mm size to cover Jubilee'sr most popular automotive size. Driver extends from 260mm to 420mm. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK4913 info) |
| |
| Screwdriver & Nutdriver Set 22pc |
| Hardened and tempered Chrome Vanadium steel shafts. Classic style driver handles with hex drive bolsters on larger sizes. Includes popular screwdrivers and nutdrivers. Contents: Slotted; 6 x 38, 3.2 x 75, 4 x 100, 5 x 100, 5 x 150, 6 x 100, 6 x 150, 8 x 200, 10 x 250mm, Phillips; #2 x 38, #3 x 75, #1 x 75, #2 x 100, #3 x 150mm, Pozi; #2 x 100mm, Nut Driver; 5, 6, 7, 8, 9, 10, 11mm |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK3726 info) |
| |
| Screwdriver Set 13pc |
| Chrome Vanadium steel shafts fully hardened, tempered and chrome plated. Driver tips are hardened, shot blasted and magnetized. Larger sizes fitted with hex drive bolster. Classic type handles manufactured from high impact resistant material. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK470 info) |
| |
| Screwdriver Set 7pc |
| Chrome Vanadium steel shafts with satin chrome finish. Precision ground and magnetized tips. Profiled handles manufactured from high impact resistant plastic. Drivers comply with German standard DIN5263. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK611 info) |
| |
| Screwdriver Set 8pc |
| Extra strong Chrome Molybdenum shafts with satin finish. Shot blasted and magnetised tips. Hexagonal profile design with ribbed handle for maximum power transfer from hand to fixing. Impact resistant handle with hanging hole. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK4301 info) |
| |
| Screws & Plugs 280pcs |
| Zinc plated screws with wall plugs. Partitioned cantilever case. Contents: Size (Qty); Screws - C/S Phillips #6x3/4(40), #8x3/4(30), #8x1(20), #8x1-1/4(15), #10x1-1/4(10), #10x1-1/2(10), Round Head Slotted #6x3/4(20), #8x1(15), #8x1-1/4(15), #10x1-1/2(10), Plugs S5(45), S6(35), S8(15) |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code BSP280 info) |
| |
| Security Bit Set 30pc |
| Chrome Molybdenum S2 steel bits with gold effect finish. Includes popular security fixing bits and supplied with driver and 1/4drive socket adaptor. Supplied in carry-case. Contents: TRX-Star*; T8H, T10H, T15H, T20H, T25H, T27H, T30H, T35H, T40H, AF Tamper-proof Hex; 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, Tri-wing; #1, #2, #3, #4, Spanner; 4, 6, 8, 10mm, Torq; 6, 8, 10mm, 1/4 Drive Socket Adaptor, Driver Handle, Bit Holder 1/4 Sq x 1/4 Hex |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK615 info) |
| |
| Security Bit Set 33pc |
| Chrome Molybdenum S2 steel bits with gold effect finish. Includes popular security fixing bits and supplied with magnetic bit holder and rubber case. Contents: TRX-Star*; T8H, T10H, T15H, T20H, T25H, T27H, T30H, T35H, T40H, AF Tamper-proof Hex; 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, Hex; 2, 2.5, 3, 4, 5, 6mm, Tri-wing; #1, #2, #3, #4, Spanner; 4, 6, 8, 10mm, Torq; 6, 8, 10mm, Magnetic Bit Holder |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK614 info) |
| |
| Security TRX-Star Screwdriver Set 8pc |
| Extra strong Chrome Molybdenum shafts with satin finish. Shot blasted and magnetised tips. Hexagonal profile design with ribbed handle for maximum power transfer from hand to fixing. Impact resistant head with hanging hole. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK4306 info) |
| |
| Security TRX-Star* Bit & Driver Set 9pc |
| Chrome Vanadium S2 driver bits with gold effect finish. 2-Way L-shaped driver with ball and clip type bit retention and non-slip handle grip. Supplied with belt mounted bit storage clip. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK551 info) |
| |
| Security TRX-Star* Key Set 9pc |
| Manufactured from heat treated and hardened Chrome Vanadium steel with matt chrome finish. Supplied in sliding case for safe storage easy key selection. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6137 info) |
| |
| Sheet Metal Clamp |
| Aids forming, bending, crimping and manipulating sheet metal. Eliminates tiresome hand-gripping. Useful also for upholstery work. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6829 info) |
| |
| Sheet Metal Screws 305pcs |
| Zinc plated pan head sheet metal screws. Partitioned cantilever case. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code BMS305 info) |
| |
| Short Handle Combination Wrench Set 11pc |
| Carbon steel wrenches. Hardened, tempered and chrome plated for extra resistance to corrosion. Raised panel style shaft. Supplied in tool roll. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK375 info) |
| |
| Short Handle Combination Wrench Set 11pc |
| Carbon steel wrenches. Hardened, tempered and chrome plated for extra resistance to corrosion. Raised panel style shaft. Supplied in tool roll. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK376 info) |
| |
| Side Cutters DIN 5238A/ISO 5749/3 |
| Suitable for cutting hard wires such as piano wire. Wire cutting capacities quoted according to DIN/ISO 5744. Manufactured from tool steel and double hardened. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK8309 info) |
| |
| Side Cutters DIN 5238B/ISO 5749/4 |
| Manufactured from tool steel with double hardened cutting edges. Cutting capacities quoted according to DIN/ISO 5744. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK8306 info) |
| |
| Side Cutters DIN 5238B/ISO 5749/4 |
| Manufactured from tool steel with double hardened cutting edges. Cutting capacities quoted according to DIN/ISO 5744. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK8307 info) |
| |
| Side Cutters DIN 5238B/ISO 5749/4 |
| Manufactured from tool steel with double hardened cutting edges. Cutting capacities quoted according to DIN/ISO 5744. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK8326 info) |
| |
| Side Cutters DIN 5238B/ISO 5749/4 |
| Manufactured from tool steel with double hardened cutting edges. Cutting capacities quoted according to DIN/ISO 5744. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK8327 info) |
| |
| Side Cutters DIN-5238A/ISO-5749/3 |
| Suitable for cutting hard wires such as piano wire. Wire cutting capacities quoted according to DIN/ISO 5744. Manufactured from tool steel and double hardened. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK8311 info) |
| |
| Sliding T-Bar Wrench 3/4 inchSq Drive |
| Manufactured from heat treated drop forged Chrome Vanadium steel with chrome plating for corrosion resistance. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S34/TB info) |
| |
| Slim Pattern Combination Wrench Set 12pc |
| Superior quality, drop forged carbon steel wrenches with long, slim pattern shafts. Heat treated and chrome plated with mirror finished surface. Supplied with wall rack. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK378 info) |
| |
| Slim Pattern Combination Wrench Set 9pc |
| Superior quality, drop forged carbon steel wrenches with long, slim pattern shafts. Heat treated and chrome plated with mirror finished surface. Supplied with wall rack/carry-case. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK378AF info) |
| |
| Socket Adaptors |
| Forged Chrome Vanadium steel adaptors. Heat treated and chrome plated for corrosion resistance. Fitted with sprung ball socket retainer. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S12F-38M info) |
| |
| Socket Adaptors |
| Forged Chrome Vanadium steel adaptors. Heat treated and chrome plated for corrosion resistance. Fitted with sprung ball socket retainer. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S38F-12M info) |
| |
| Socket Adaptors |
| Forged Chrome Vanadium steel adaptors. Heat treated and chrome plated for corrosion resistance. Fitted with sprung ball socket retainer. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S38F-14M info) |
| |
| Socket Adaptors |
| Forged Chrome Vanadium steel adaptors. Heat treated and chrome plated for corrosion resistance. Fitted with sprung ball socket retainer. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S38F-H info) |
| |
| Socket Extension Bars |
| Forged Chrome Vanadium steel extensions bars. Hardened, tempered and satin chrome plated. Deep knurling on shaft allows extra grip for oily fingers when spinning off sockets. Fitted with sprung ball socket retainer. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S12E150 info) |
| |
| Socket Extension Bars |
| Forged Chrome Vanadium steel extensions bars. Hardened, tempered and satin chrome plated. Deep knurling on shaft allows extra grip for oily fingers when spinning off sockets. Fitted with sprung ball socket retainer. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S12E200 info) |
| |
| Socket Extension Bars |
| Forged Chrome Vanadium steel extensions bars. Hardened, tempered and satin chrome plated. Deep knurling on shaft allows extra grip for oily fingers when spinning off sockets. Fitted with sprung ball socket retainer. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S12E75 info) |
| |
| Socket Extension Bars |
| Forged Chrome Vanadium steel extension bars. Hardened, tempered and satin chrome plated. Deep knurling on shaft allows extra grip for oily fingers when spinning off sockets. Fitted with sprung ball socket retainer. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S38E150 info) |
| |
| Socket Extension Bars |
| Forged Chrome Vanadium steel extension bars. Hardened, tempered and satin chrome plated. Deep knurling on shaft allows extra grip for oily fingers when spinning off sockets. Fitted with sprung ball socket retainer. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S38E200 info) |
| |
| Socket Extension Bars |
| Forged Chrome Vanadium steel extension bars. Hardened, tempered and satin chrome plated. Deep knurling on shaft allows extra grip for oily fingers when spinning off sockets. Fitted with sprung ball socket retainer. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S38E75 info) |
| |
| Socket Extension Bars 3/4 inchSq Drive |
| Forged Chrome Vanadium steel extensions. Hardened, tempered and chromed for corrosion resistance. Fitted with sprung ball socket retainer. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S34/E100 info) |
| |
| Socket Extension Bars 3/4 inchSq Drive |
| Forged Chrome Vanadium steel extensions. Hardened, tempered and chromed for corrosion resistance. Fitted with sprung ball socket retainer. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S34/E200 info) |
| |
| Socket Extension Bars 3/4 inchSq Drive |
| Forged Chrome Vanadium steel extensions. Hardened, tempered and chromed for corrosion resistance. Fitted with sprung ball socket retainer. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code S34/E400 info) |
| |
| Socket Rail Tray 1/4 inch, 3/8 inch & 1/2 inch |
| Steel tray comprising of five 430mm rails and packs of clips suitable for retaining 1/4, 3/8 and 1/2Sq drive sockets. Also includes two 10pc power driver bit holders. Tray features carry handles and hanging holes for workshop storage. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK272 info) |
| |
| Socket Rail Tray 1/4 inch, 3/8 inch & 1/2 inchSq Drive |
| Steel panel comprising of 4 x 430mm rails and packs of clips suitable for retaining 1/4, 3/8 and 1/2sq drive sockets. Fitted with carry handle. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK271 info) |
| |
| Socket Retaining Bar Set 3pc |
| 410mm Rails each fitted with 16 adjustable socket clips. Drilled rails allow wall mounting or cabinet fixing. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK270 info) |
| |
| Socket Retaining Bars |
| Tidy storage for loose sockets. Carry rail to the job or mount onto wall or tool-box. Handle marked with drive size. Supplied with 14 socket clips. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK1214 info) |
| |
| Socket Retaining Bars |
| Tidy storage for loose sockets. Carry rail to the job or mount onto wall or tool-box. Handle marked with drive size. Supplied with 14 socket clips. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK1414 info) |
| |
| Socket Retaining Bars |
| Tidy storage for loose sockets. Carry rail to the job or mount onto wall or tool-box. Handle marked with drive size. Supplied with 14 socket clips. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK3814 info) |
| |
| Socket Set 1 inchSq Drive DuoMetricr 16pc |
| Manufactured from heat treated drop forged Chrome Vanadium steel and chrome plated for corrosion resistance. Heat treated high Carbon Steel sockets. DuoMetricr sockets cover 18 sizes. Packed in heavy-duty carry-case. Contents: Metric Sockets; 36, 38(1-1/2), 41(1-5/8), 46(1-13/16), 50, 55(2-3/16), 60(2-3/8), 65(2-9/16), 70(2-3/4), 75mm(2-15/16), 80mm(3-1/8), 1Sq Drive Reversible Ratchet Head, Breaker Bar 560mm, T-Bar Adaptor, Extension Bars; 200, 450mm. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK260 info) |
| |
| Socket Set 1/2 inchSq Drive DuoMetricr 24pc |
| DuoMetricr socket selection covers 29 Metric and Imperial sizes. All sockets manufactured from heat treated Chrome Vanadium steel. Industrial satin chrome finished for corrosion resistance. Ratchet with rubber-grip handle, pear-shaped head, flip reverse and quick release mechanism. Supplied in heavy duty storage case and colour box. Contents: Sockets; 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 27, 30, 32mm, DuoMetricr Coverage; 7/16, 15/32, 19/32, 5/8, 3/4, 25/32, 7/8, 15/16, 1-1/16, 1-3/16, 1-1/4. Spark Plug Socket 14mm, Extension Bars;125, 250mm, Sliding T-Bar 250mm, Universal Joint, GS/TUV Approved 1/2 Sq Drive Flip Reverse Ratchet Wrench with Quick Release. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK792 info) |
| |
| Socket Set 1/2 inchSq Drive DuoMetricr 42pc |
| DuoMetricr socket selection covers 37 Metric and Imperial sizes. All sockets manufactured from heat treated Chrome Vanadium steel. Industrial satin chrome finished for corrosion resistance. Ratchet with rubber-grip handle, pear-shaped head, flip reverse and quick release mechanism. Supplied in heavy duty storage case and colour box. Contents: 1/2 Sq Drive Sockets; 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 24, 26, 27, 30, 32mm, 1/2, 9/16, 11/16, 13/16, 1, DuoMetricr Coverage; 5/16, 7/16, 15/32, 19/32, 5/8, 3/4, 25/32, 7/8, 15/16, 1-1/16, 1-3/16, 1-1/4, Spark Plug Sockets; 10, 12, 14mm, Sliding T-Head, Extension Bars; 75, 125, 250mm, Spinner Handle with Coupler, Universal Joint, Speed Brace,. Driver Bits; Slotted - 5.5, 7mm, Phillips - #1, #2, Pozi - #2, #3, GS/TUV Approved 1/2Sq Drive Flip Reverse Ratchet Wrench with Quick Release. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK793 info) |
| |
| Socket Set 1/2 inchSq Drive DuoMetricr 43pc |
| Heat treated Chrome Vanadium steel sockets, extensions and ratchets. Finished in high chrome for corrosion resistance. Professional style ratchet handle with flip reverse and quick release socket mechanism. Supplied in a heavy duty storage case. Contents: 6pt Sockets; 8(5/16), 9, 10, 12(15/32), 13, 14, 15(19/32), 16(5/8), 20(25/32), 23, 27(1-1/16), 32(1-1/4). 6pt Wheel Nut Sockets; 17, 18, 19(3/4), 21, 22mm(7/8). 6pt AF Sockets; 3/8, 7/16(11mm), 1/2, 9/16, 13/16, 1, 1-3/16(30mm). 6pt AF Wheel Nut Sockets; 11/16, 15/16(24mm), 1-1/8. DuoMetricr sizes indicated in brackets 12pt WW Sockets; 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 6pt Spark Plug Sockets; 16, 21mm, 1/2Sq Drive Ratchet Wrench 250mm with Quick Release and Flip Reverse, Flexible Handle 430mm, Sliding T-Bar 250mm, Universal Joint, Extension Bars; 75, 125, 250mm, T-Bar Adaptor 3/8F x 1/2M. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK254 info) |
| |
| Socket Set 1/2 inchSq Drive WallDriver DuoMetricr 17pc |
| DeLuxe Professional socket set with heat treated Chrome Vanadium steel WallDriver sockets. Dual satin/chrome finish. Flip-reverse ratchet with quick socket release. Supplied in metal carry-case. Contents: Sockets; 8, 10, 11, 12, 13, 14, 15, 16, 17, 19, 21, 23, 26mm, 1/2Sq Drive Flip Reverse Ratchet Wrench with Quick Release, Spark Plug Socket 10mm, Sliding T-Bar, Extension Bar 125mm. DuoMetricr coverage; 5/16, 7/16, 15/32, 19/32, 5/8, 3/4. inch |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6923 info) |
| |
| Socket Set 1/2 inchSq Drive WallDriver DuoMetricr 24pc |
| Chrome Vanadium steel ratchet wrench, hardened, tempered and fully polished. Pear head configuration with 24 tooth ratchet, flip reverse and quick socket release. Cold forged Chrome Vanadium steel WallDriver sockets with chrome/satin finish and knurled finger grips. Supplied in metal carry-case. Contents: Sockets; 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 27, 30, 32mm, 1/2Sq Drive Flip Reverse Ratchet Wrench with Quick Release, Swivel Head Breaker Bar 380mm, Extension Bars; 125, 250mm, Sliding T-Bar, Universal Joint. DuoMetricr coverage; 7/16, 15/32, 19/32, 5/8, 3/4, 25/32 inch, 7/8, 15/16, 1-1/16, 1-3/16, 1-1/4. inch |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6924 info) |
| |
| Socket Set 1/2 inchSq Drive WallDriver DuoMetricr 26pc |
| Chrome Vanadium steel socket sets heat treated and satin finished for corrosion resistance. DuoMetricr socket selection covers a wide range of Metric and Imperial sizes on selected sockets Ratchets fitted with ultra-smooth 72-tooth ratchet giving just-so ratchet lash Modern twist-reverse ratchet heads with push-off socket retention. Comfortable rubber grip handle. WallDriver socketry grips the flats of the fixing - no problem with rounded fixings. Apply up to 30% more torque to fixing. Professional composite carry-cases with rubber feet. Contents: Sockets; 8, 9, 10, 11, 12, 13, 14, 15, 17, 19, 22, 24, 27mm, Deep Sockets; 10, 11, 12, 13, 14, 15, 17, 19mm, Universal Joint Socket, Extension Bars; 125, 250mm, T-Bar 250mm, 1/2 Sq Drive Ratchet Wrench with 72 Teeth. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK8931 info) |
| |
| Socket Set 1/2 inchSq Drive WallDriver DuoMetricr 30pc |
| Chrome Vanadium steel socket sets heat treated and satin finished for corrosion resistance. DuoMetricr socket selection covers a wide range of Metric and Imperial sizes on selected sockets Ratchets fitted with ultra-smooth 72-tooth ratchet giving just-so ratchet lash Modern twist-reverse ratchet heads with push-off socket retention. Comfortable rubber grip handle. WallDriver socketry grips the flats of the fixing - no problem with rounded fixings. Apply up to 30% more torque to fixing. Professional composite carry-cases with rubber feet. Contents: Sockets; 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 30, 32mm, DuoMetricr Coverage; 5/16, 7/16, 15/32, 19/32, 5/8, 3/4, 25/32, 7/8, 15/16, 1-1/16, 1-3/16, 1-1/4, Spark Plug Sockets; 10, 14mm, Extension Bars; 75, 125, 250mm, Universal Joint, Sliding T-Bar 250mm, 1/2Sq Drive Ratchet Wrench with 72 Teeth. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK893 info) |
| |
| Socket Set 1/2 inchSq Drive WallDriver DuoMetricr 33pc |
| Deluxe professional socket set with heat treated Chrome Vanadium steel WallDriver sockets. Dual satin/chrome finish. Flip-reverse ratchet with quick socket release. Supplied in metal carry-case. Contents: 6pt Sockets; 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 26, 27, 32mm, 3/8, 1/2, 9/16, 11/16, Spark Plug Sockets; 16, 21mm, 1/2Sq Drive Flip Reverse Ratchet Wrench with Quick Release, Swivel Head Breaker Bar 380mm, Universal Joint, Extension Bars; 75, 125, 250mm, Steel Box. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK693 info) |
| |
| Socket Set 1/4 inch & 1/2 inchSq Drive DuoMetricr 51pc |
| Chrome Vanadium steel sockets and ratchet components hardened and finished in high chrome for corrosion resistance. This set is suitable for 35 different fastener sizes with a total of 24 sockets. Two high quality ratchet wrenches in 1/4 and 1/2sq drive are included in this set and covered by our lifetime guarantee. Contents: 1/4Dr 6pt Sockets; 4(5/32), 4.5, 5, 5.5(7/32), 6, 7, 8(5/16), 9, 10, 11(7/16), 13mm. 1/2Dr 6pt Sockets; 10, 11(7/16), 12(15/32), 13, 14, 15(19/32), 17, 19(3/4), 22(7/8), 24(15/16), 27(1-1/16), 30(1-3/16), 32mm(1-1/4). DuoMetricr sizes indicated in brackets 1/2Dr Spark Plug Socket; 21mm, Extension Bars; 1/4-75mm, 1/2-125, 250mm, Sliding T-Bars; 1/4, 1/2, Bit Driver Handle, Universal Joints; 1/4, 1/2, Hex Key Wrenches; 1.5, 2, 2.5mm, 1/4Dr Hex Bits; Slotted - 4, 5.5, 7mm, Phillips - #1, #2, #3, Hex - 3, 4, 5, 6, 7, 8mm, 1/4Dr Bit Adaptor, Reversible Ratchet Wrenches: 1/4, 1/2Sq Dr. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK2515 info) |
| |
| Socket Set 1/4 inch & 3/8 inchSq Drive 37pc |
| Chrome Vanadium steel sockets, extensions and ratchet components, hardened and finished in high chrome for corrosion resistance. Supplied in tough storage case. Contents: 1/4Dr: 6pt Sockets; 4, 4.5, 5, 6, 7, 8, 9mm. 3/8Dr: 6pt Sockets; 10, 11, 12, 13, 14, 17, 19mm, Extension Bars; 75, 150mm, Spark Plug Socket; 21mm. Hex Bits; 3, 4, 5, 6, 7, 8mm, Phillips Bits; #1, #2, #3, Slotted Bits; 4, 5.5, 7mm, Hex Key Wrenches; 1.5, 2, 2.5mm, Spinner Handle, Bit Holder 1/4 x 1/4Drive, 3/8Sq Drive Female x 1/4Sq Drive Male Adaptor, 3/8Sq Drive Reversible Ratchet Wrench 200mm, Spinner Disc for Ratchet. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK245 info) |
| |
| Socket Set 1/4 inch & 3/8 inchSq Drive WallDr DuoMr 39pc |
| Deluxe professional socket set with heat treated Chrome Vanadium steel WallDriver sockets. Dual satin/chrome finish. Flip-reverse ratchet with quick socket release. Supplied in metal carry-case. Contents: 1/4Dr Sockets; 4, 5, 6, 7, 8, 9, 10, 11, 12mm, 3/16,7/32,1/4,9/32,5/16,11/32,3/8,7/16,1/2. 3/8Dr Sockets; 9, 10, 11, 12, 13, 14, 16, 17, 19mm, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 3/8Sq Drive Flip Reverse Ratchet Wrench, Extension Bar 75mm, Spark Plug Socket 10mm, Adaptor 3/8F-1/4M, Spinner Handle. DuoMetricr coverage; 15/32, 19/32. inch |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK6921 info) |
| |
| Socket Set 1/4 inch & 3/8 inchSq Drive WallDr DuoMr 73pc |
| Hardened and tempered Chrome Vanadium steel ratchet wrenches with satin finish. Pear head style with flip reverse and quick release. Comfort grip handle. WallDriver Chrome Vanadium steel sockets with chrome/satin finish and knurled finger grips. Chrome Molybdenum steel bit sockets. Supplied in heavy duty storage case. Contents: 1/4 Dr Components - Sockets; 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13mm, Deep Sockets; 8, 10, 11, 12, 13mm, Hex Socket Bits; 3, 4, 5, 6mm, TRX-Star* Socket Bits; T10, T15, T20, T25, T27, T30, Slotted Socket Bits; 4, 5.5, 6.5mm, Phillips and Pozi Socket Bits; #1, #2, #3, 1/4Sq Drive Reversible Ratchet Wrench, Extension Bars; 50, 100mm, Sliding T-Bar, Universal Joint, Spinner Handle, Hex Keys; 1.5, 2, 2.5mm. 3/8 Dr Components - Sockets; 14, 15, 16, 17, 18, 19, 20, 21, 22, 24mm, Deep Sockets; 14, 15, 17, 19mm, TRX-Star* Socket Bits; T40, T45, T50, T55, Hex Socket Bits; 8, 10mm, 3/8Sq Drive Flip Revere Ratchet Wrench with Quick Release, Extension Bars; 75, 150, 250mm, Spark Plug Sockets; 10, 14mm, Universal Joint, Extension Adaptor 3/8M-1/2F. DuoMetricr coverage; 5/32, 7/32, 5/16, 7/16, 15/32, 19/32, 5/8, 3/4, 25/32, 7/8, 15/16. inch |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK2751 info) |
| |
| Socket Set 1/4 inchSq Drive Metric 24pc |
| Professional quality set with comfort grip ratchet featuring flip reverse and quick release. Supplied in a composite carry-case. Contents: Sockets; 4,5,6,7,8,9,10,11,12,13mm, Slotted Bits; 4, 5.5, 7mm, Phillips Bits; #1, #2, #3, Bit Adaptor; 1/4-6mm, Pozi Bits; #1, #2, #3, TRX-Star* Bits; T15, T25, T40, 1/4Sq Drive Comfort Grip Reversible Ratchet Wrench. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK247 info) |
| |
| Socket Set 1/4 inchSq Drive WallDriver DuoMetricr 26pc |
| Chrome Vanadium steel socket sets heat treated and satin finished for corrosion resistance. DuoMetricr socket selection covers a wide range of Metric and Imperial sizes on selected sockets Ratchets fitted with ultra-smooth 72-tooth ratchet giving just-so ratchet lash Modern twist-reverse ratchet heads with push-off socket retention. Comfortable rubber grip handle. WallDriver socketry grips the flats of the fixing - no problem with rounded fixings. Apply up to 30% more torque to fixing. Professional composite carry-cases with rubber feet. Contents: Sockets; 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13mm, DuoMetricr Coverage; 5/32, 7/32, 5/16, 7/16, 15/32, Hex Socket Bit; 3, 4, 5, 6mm, Phillips Socket Bit; #1, #2, TRX-Star* Socket Bits; T15, T20, Extension Bars; 50, 115mm, Universal Joint, Sliding T-Bar 110mm, Spinner/Extension 150mm, 1/4 Sq Drive Ratchet Wrench with 72 Teeth. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK891 info) |
| |
| Socket Set 1/4 inchSq Drive WallDriver DuoMetricr 29pc |
| Deluxe professional socket set with heat treated Chrome Vanadium steel sockets and bits. Flip-reverse rubber grip ratchet with quick release. Supplied in metal case. Contents: 6pt Sockets; 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13mm, Bit Sockets; Straight Slot - 4, 5.5, 7mm, Hex - 3, 4, 5, 6, 8mm, Phillips - #1, #2; Pozi - #1, #2,; Extension Bar 50mm, 1/4Sq Drive Flip Reverse Ratchet Wrench with Quick Release, Spinner Handle, Universal Joint, Sliding T-Bar. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK697 info) |
| |
| Socket Set 1/4 inchSq Drive WallDriver DuoMetricr 40pc |
| DeLuxe Professional socket set with heat treated Chrome Vanadium steel sockets and bits. Flip-reverse rubber grip ratchet with quick release. Supplied in metal case. Contents: 6pt Sockets; 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13mm, 3/16, 1/4, 9/32, 11/32, 3/8, 1/2, 6pt Deep Sockets; 4, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13mm, 3/16, 1/4, 3/8, 1/2, 1/4Sq Drive Flip Reverse Ratchet Wrench with Quick Release, Spinner Handle, Sliding T-Bar 105mm, Flexible Extension, Universal Joint, Extension Bars; 50, 100, 150mm. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK690 info) |
| |
| Socket Set 1/4 inchSq Drive WallDriver DuoMetricr 46pc |
| Hardened and tempered Chrome Vanadium steel ratchet wrench with satin finish. Pear head style with flip reverse and quick release. Comfort grip handle. WallDriver Chrome Vanadium steel sockets with chrome/satin finish and knurled finger grips. Chrome Molybdenum steel bit sockets. Supplied in heavy duty storage case. Contents: Sockets; 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14mm, Deep Sockets; 8, 10,12, 13mm, Socket Bits; Hex - 3, 4, 5, 6, 8mm, TRX-Star* - T10, T15, T20, T25, T30, T40, Slotted - 4, 5.5, 6.5mm, Phillips and Pozi - #1, #2, #3, Allen Keys - 2, 3, 4mm, Extension Bars; 50, 100mm, Spinner Handle, Sliding T-Bar, Universal Joint, 1/4Sq Drive Flip Reverse Ratchet Wrench with Quick Release. DuoMetricr coverage; 5/32, 7/32, 5/16, 7/16, 15/32. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK2749 info) |
| |
| Socket Set 1/4 inchSq Drive WallDriver DuoMetricr 57pc |
| Chrome Vanadium steel socket sets heat treated and satin finished for corrosion resistance. DuoMetricr socket selection covers a wide range of Metric and Imperial sizes on selected sockets Ratchets fitted with ultra-smooth 72-tooth ratchet giving just-so ratchet lash Modern twist-reverse ratchet heads with push-off socket retention. Comfortable rubber grip handle. WallDriver socketry grips the flats of the fixing - no problem with rounded fixings. Apply up to 30% more torque to fixing. Professional composite carry-cases with rubber feet. Contents: Sockets; 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13mm, Deep Sockets; 4, 5, 6, 7, 8, 9, 10, 11, 12, 13mm, DuoMetricr Coverage; 5/32, 7/32, 5/16, 7/16, 15/32, Universal Joint Socket, 24Pc Bit Set; Slotted - 4, 4.5, 5.5, 6.5mm, Pozi - #1, #2 x 2, #3, Phillips - #1, #2 x 2, #3, Hex - 2, 3, 4, 5, 6, 8mm, TRX-Star* - T10, T15, T20, T25, T27, T30, Magnetic Bit Holder, 1/4Drive Bit Adaptor, Driver Handle 150mm, Extension Bars; 50, 100mm, T-Bar 110mm, 1/4Sq Drive Ratchet with 72 Teeth. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK8912 info) |
| |
| Socket Set 20pc 3/8 inch Square Drive |
| Deluxe professional socket set with heat treated polished Chrome Vanadium sockets. Flip reverse, 48-tooth comfort grip ratchet handle with push-button socket release.
Contents: Sockets 6, 7, 8, 9, 10, 11, 12, 12, 14, 15, 16, 17, 19, 22, 24mm, Extension |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK854 info) |
| |
| Socket Set 23pc 1/2 inch Square Drive |
| Deluxe professional socket set with heat treated polished Chrome Vanadium sockets covering sizes from 8 to 32mm. Flip reverse, 48-tooth comfort grip ratchet handle with push-button socket release.
Contents: Sockets; 8, 10, 11, 12, 13, 14, 15, 16, 17, 1 |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK857 info) |
| |
| Socket Set 24pc 1/4 inch Square Drive |
| Deluxe professional socket set with standard and deep heat treated polished Chrome Vanadium sockets. Flip reverse, 48-tooth comfort grip ratchet handle with push-button socket release.
Contents: Standard Sockets; 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK851 info) |
| |
| Socket Set 3/4 inchSq Drive DuoMetricr 22pc |
| Includes 29mm and 50mm sockets for use on agricultural vehicles - sizes normally found on Massey Ferguson tractors. Made from heat treated drop forged steel and supplied in strong steel case. Contents: Metric 12 Point Sockets; 22(7/8), 24(15/16), 26, 27(1-1/16), 29, 30(1-3/16), 32(1-1/4), 33(1-5/16), 36, 38(1-1/2), 41(1-5/8), 46(1-13/16), 50mm, AF 12 Point Sockets; 1-1/8, 1-3/8(35mm), 1-7/16, 1-3/4, 3/4Sq Drive Reversible Ratchet Wrench 450mm(18), Extension Bars; 100(4), 150(6), 200mm(8), Sliding T-Bar 400mm(16). |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK258 info) |
| |
| Socket Set 3/4 inchSq Drive DuoMetricr 22pc |
| DuoMetricr socket selection covers 27 Metric and Imperial sizes. Made entirely from Chrome Vanadium steel. This set features heat treated DuoMetricr sockets with high chrome finish. Ratchet features heavily knurled grip and twist reverse mechanism. Contents: Sockets; 22, 24, 26, 27, 29, 30, 32, 33, 35, 36, 38, 41, 46, 50mm, 1-1/8, 1-7/16, 1-3/4, 3/4Sq Drive Reversible Ratchet Wrench, Sliding T-Bar, Extension Bars; 100(4), 150(6), 200mm(8), Cross Reference Chart. DuoMetricr coverage: 7/8, 15/16, 1-1/16, 1-3/16, 1-5/16, 1-1/4, 1-3/8, 1-1/2, 1-5/8, 1-13/16. inch |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK259/CRV info) |
| |
| Socket Set 3/4 inchSq Drive DuoMetricr 26pc |
| Manufactured from heat treated, drop-forged steel and chrome plated for corrosion resistance. Packed in heavy duty impact resistant storage case. Contents: Metric 12 Point Sockets; 22(7/8), 24, 26, 27(1-1/16), 30, 32, 33, 36, 38, 41, 46mm(1-13/16), AF 12 Point Sockets; 15/16, 1-1/8, 1-3/16, 1-1/4, 1-5/16, 1-3/8, 1-7/16, 1-1/2, 1-5/8, 1-3/4, 3/4Sq Drive Reversible Ratchet 450mm, Extension Bars; 100(4), 150(6), 200mm(8), Sliding T-Bar. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK2582 info) |
| |
| Socket Set 3/4 inchSq Drive WallDriver DuoMetricr 22pc |
| Heat treated drop forged Chrome Vanadium steel with chrome plating for corrosion resistance. WallDriver socketry with DuoMetricr selection gives maximum power transfer and value while pear head ratchet with flip reverse and push off gives control. Supplied in carry-case. Contents: 3/4 12pt WallDriver Sockets; 19, 21, 22, 23, 24, 26, 27, 29, 30, 32, 33, 35, 36, 38, 41, 46, 50mm, 3/4Sq Drive Pear Head Reversible Ratchet Wrench 510mm, Extension Bars; 100, 150, 200mm, Sliding T-Bar 460mm. DuoMetricr coverage: 3/4, 7/8, 15/16, 1-1/16, 1-3/16, 1-1/4, 1-5/16, 1-3/8, 1-1/2, 1-5/8, 1-13/16. inch |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK2598 info) |
| |
| Socket Set 3/8 inch & 1/2 inchSq Drive WallDr DuoMr 64pc |
| Deluxe professional socket set with heat treated Chrome Vanadium steel WallDriver sockets. Dual satin/chrome finish. Flip-reverse ratchet with quick socket release. Supplied in metal carry-case. Contents: 3/8Dr 6pt Sockets; 13, 14, 15, 16, 17, 18, 19mm, 3/8, 1/2, 9/16, 11/16. 3/8Dr Deep 6pt Sockets; 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm, 3/8, 1/2, 9/16, 11/16. 1/2Dr 6pt Sockets; 20, 21, 22, 23, 24, 25, 26, 27, 28, 30, 32mm. 1/2Dr 12pt WW Sockets; 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4. 3/8Dr Spark Plug Sockets; 16, 18, 21mm. 3/8 Tools - Ratchet Wrench with Quick Release, Sliding T-Bar 150mm, Universal Joint, Extension Bars; 75, 200mm, T-Bar, 1/2 Tools - Ratchet Wrench with Quick Release, Swivel Head Breaker Bar 380mm, Universal Joint, Extension Bars; 125, 250mm, T-Bar Adaptor 1/2F-3/8M, Speed Brace, Steel Box. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK694 info) |
| |
| Socket Set 3/8 inchSq Drive DuoMetricr 34pc |
| Heat treated Chrome Vanadium steel sockets, extensions and ratchets. Finished in high chrome for corrosion resistance. Professional ratchet handle with reverse and quick release socket mechanism. Supplied in tough storage case. Contents: 6pt Sockets; 8(5/16), 9, 10, 11(7/16), 12(15/32), 13, 14, 15(9/32), 16(5/8), 17, 18, 19(3/4), 20(25/32), 21, 22mm(7/8). 6pt Deep Sockets; 8(5/16), 9, 10, 11(7/16), 12(15/32), 13, 14, 16(5/8), 17, 19(3/4), 22mm(7/8). DuoMetricr sizes indicated in brackets Spark Plug Sockets; 16, 21mm, 3/8Sq Drive Ratchet Wrench 200mm, with Quick Release and Flip Reverse, Bent Type Flexible Handle 240mm, Universal Joint, Extension Bars; 75, 150mm, T-Bar Adaptor 1/2F x 3/8M. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK251 info) |
| |
| Socket Set 3/8 inchSq Drive DuoMetricr 44pc |
| DuoMetricr socket selection covers a wide range of Metric and Imperial sizes. Normal and deep socket contents manufactured from heat treated Chrome Vanadium steel. TUV/GS Approved ratchet with rubber-grip handle, pear-shaped head, flip reverse and quick release mechanism. Supplied in heavy duty metal case. Contents: Standard Sockets; 9, 10, 11, 12, 13, 14, 15, 17, 19, 22mm, Deep Sockets; 10, 11, 12, 13, 14, 15, 17mm DuoMetricr Coverage; 7/16, 15/32, 19/32, 3/4, 7/8, Spark Plug Sockets; 16, 21mm, Extension Bar 70mm, Universal Joint, Adaptor, Bits; Slotted - 4, 5, 6.5, 7mm, Phillips - #1, #2, #3, #4, Hex - 5, 6, 6.5, 7mm, TRX-Star* -T20, T25, T27, T30, T40, T45, T50, T55, GS/TUV Approved 3/8 Sq Drive Flip Reverse Ratchet Wrench with Quick Release. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK791 info) |
| |
| Socket Set 3/8 inchSq Drive DuoMetricr 79pc |
| Chrome Vanadium steel sockets and ratchet components, hardened and finished in high chrome for corrosion resistance. Bits manufactured from Chrome Molybdenum S2 steel for long life. Supplied in tough storage case. This set has been sold extensively in the USA, UK and Europe for the last 15 years and is particularly recommended for the professional car technician. Contents: 6pt Sockets; 8(5/16), 9, 10mm, 12(15/32), 13, 14, 15(19/32), 16(5/8), 17mm. 6pt AF Sockets; 3/8, 7/16(11mm), 1/2, 9/16, 11/16, 3/4(19mm), 13/16, 7/8(22mm). 6pt Deep Sockets; 8(5/16), 9, 10, 12(15/32), 13, 14, 16(5/8), 17mm. 6pt AF Deep Sockets;: 3/8, 7/16(11mm), 1/2, 9/16, 11/16, 3/4(19mm), 13/16, 7/8(22mm). DuoMetricr sizes indicated in brackets Spline Bit Deep Sockets; 6 x 50, 8 x 50, 10 x 50, 8 x 100, 10 x 100, 12 x 100mm, 6pt Spark Plug Sockets; 16, 21mm, 3/8Sq Drive Ratchet Wrench 200mm, with Quick Release and Flip Reverse, Spinner Handle/Extension; 250mm, Bent Type Flexible Handle; 250mm. Universal Joint. Extension Bars; 75,150mm,T-Bar Adaptor 1/2F x 3/8M, Coupler 3/8Sq Dr x 1/4 Hex, Hex Bits; Slotted- 4, 5.5, 7mm, Phillips-#1, #2, #3, TRX-Star*-T10, T15, T20, T25, T30, T40, Hex-3, 4, 5, 6, 7, 1/8 9/64, 5/32, 3/16, 7/32, 1/4, Pozi-#1, #2, #3, Hex Keys; 1.5, 2, 2.5mm. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK252 info) |
| |
| Socket Set 3/8 inchSq Drive WallDriver DuoMetric 78pc |
| Hardened and tempered Chrome Vanadium steel ratchet wrench with satin finish. Pear head style with flip reverse and quick release. Comfort grip handle. Chrome Vanadium steel sockets with chrome/satin finish and knurled finger grips. Chrome Molybdenum steel bit sockets with gold effect tamper-proof driver bits. Supplied in heavy duty storage case. Contents: WallDriver Sockets; 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 24mm, TRX-Star* Socket Bits; T10, T15, T20, T25, T27, T30, T40, T45, T50, T55 (50mm), Deep WallDriver Sockets; 8, 10, 11, 12, 13, 14, 15, 17, 19 (63mm),TRX-Star* Tamper-proof Bits; T-8, T-10, T-15, T-20, T-25, T-27, T-30, T-35, T-40, Hex Bits; 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, Security Hex Socket Bits; 3, 4, 5, 6, 8, 10mm, Security Spanner Bits; 4, 6, 8, 10,Security Tri-Wing Bits; 1, 2, 3, 4, Extension Bars; 3, 6, 10, Torx Bits; 6, 8, 10, Spark Plug Sockets; 16, 21mm, 1/4 Bit Holder, 3/8Sq Drive Flip Reverse Ratchet Wrench with Quick Release, Universal Joint, 3/8 Drive Bit Adaptor. DuoMetricr coverage; 15/32, 5/8, 3/4, 25/32, 7/8, 15/16, 5/16, 7/16. |
| CLICK HERE TO BUY AT CCW |
| (Sealey Hand Tools Code AK275 info) |
| |
| Socket Set 3/8 inchSq Drive WallDriver DuoMetricr 27pc |
| Chrome Vanadium steel socket sets heat treated and satin finished for corrosion resistance. DuoMetricr socket selection covers a wide range of Metric and Imperial sizes on selected sockets Ratchets fitted with ultra-smooth 72-tooth ratchet giving just-so ratchet lash Modern twist-reverse ratchet heads with push-off socket retention. Comfortable rubber grip handle. WallDriver socketry grips the flats of the fixing - no problem with rounded fixings. Apply up to 30 |
