Vehicle Service Tools: Engine General Tools
|
Shop for Vehicle Service Tools and other garage equipment in the
Classic Wheels online toolstore
You're in the engine general tools section of the Classic Wheels toolshop, describing these and other
vehicle service tools available at the Classic Car World (CCW) online store.
CCW are a specialist supplier of workshop and garage tools over the 'net, and listed below are the engine general tools
they have for sale in the vehicle service tools area of their catalogue. For their very latest prices please visit their site.
As well as low prices on new engine general tools, you can find hundreds of other tools, just check out the left hand
category menu and have a look around at other vehicle service tools they have. They stock all the leading brands, such
as Sealey.
|
| 15 Blade Metric Feeler Gauge |
| Metric graduated 15 blade feeler gauge. Dual Marked in Metric and Imperial. Blade Dimensions 75 x 13mm. Blade Sizes: 0.06 0.07 0.08 0.10 0.15 0.20 0.25 0.30 0.35 0.40 0.45 0.50 0.55 0.60 0.70mm |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS511 info) |
| |
| 22 Blade Imperial Go/No-Go Feeler Gauge |
| Imperial graduated 22 blade feeler gauge. Dual marked in Imperial and Metric. Blade tips are step-ground by 0.002 inch less than marked blade thickness to permit quick checking of proper tolerances. Blade Dimensions 75 x 13mm. Blade Sizes: 0.004-0.006 inch 0.005-0.007 inch 0.006-0.008 inch 0.007-0.009 inch 0.008-0.010 inch 0.009-0.011 inch 0.010-0.012 inch 0.011-0.013 inch 0.012-0.014 inch 0.013-0.015 inch 0.014-0.016 inch 0.015-0.017 inch 0.016-0.018 inch 0.017-0.019 inch 0.018-0.020 inch 0.019-0.021 inch 0.020-0.022 inch 0.21-0.23 inch 0.022-0.024 inch 0.023-0.025 inch 0.024-0.026 inch 0.025-0.027 inch |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS514 info) |
| |
| 25 Blade Extra-Long Imperial Feeler Gauge |
| Dual marked in Imperial and Metric. Extra-long blade pattern. Blade dimensions 300 x 13mm. Blade Sizes: 0.0015 inch 0.002 inch 0.003 inch 0.004 inch 0.005 inch 0.006 inch 0.007 inch 0.008 inch 0.009 inch 0.010 inch 0.011 inch 0.012 inch 0.013 inch 0.014 inch 0.015 inch 0.016 inch 0.017 inch 0.018 inch 0.019 inch 0.020 inch 0.021 inch 0.025 inch 0.027 inch 0.030 inch 0.040 inch |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS516 info) |
| |
| 26 Blade Imperial Offset Feeler Gauge |
| Imperial graduated 26 blade feeler gauge. Dual marked in Imperial and Metric. 45§-15mm offset tips are essential for checking tolerances on OHV configurations and suitable for other applications where straight blades cannot reach. Blade Dimensions 75 x 13mm (45§-15mm offset). Blade Sizes: 0.005 inch 0.006 inch 0.007 inch 0.008 inch 0.009 inch 0.010 inch 0.011 inch 0.012 inch 0.013 inch 0.014 inch 0.015 inch 0.016 inch 0.017 inch 0.018 inch 0.019 inch 0.020 inch 0.021 inch 0.022 inch 0.023 inch 0.024 inch 0.025 inch 0.026 inch 0.027 inch 0.028 inch 0.029 inch 0.030 inch |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS515 info) |
| |
| 35 Blade Imperial Feeler Gauge |
| Imperial graduated 35 blade feeler gauge. Dual marked in Imperial and Metric. Blade Dimensions 75 x 13mm. Blade Sizes: 0.0015 inch 0.002 inch 0.003 inch 0.004 inch 0.005 inch 0.006 inch 0.007 inch 0.008 inch 0.009 inch 0.010 inch 0.011 inch 0.012 inch 0.013 inch 0.014 inch 0.015 inch 0.016 inch 0.017 inch 0.018 inch 0.019 inch 0.020 inch 0.021 inch 0.022 inch 0.023 inch 0.024 inch 0.025 inch 0.026 inch 0.027 inch 0.028 inch 0.029 inch 0.030 inch 0.031 inch 0.032 inch 0.033 inch 0.034 inch 0.035 inch |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS512 info) |
| |
| 36 Blade Combination Steel/Brass Feeler Gauge |
| Imperial graduated 36 blade feeler gauge. Dual marked in Imperial and Metric. 30 x steel blades and 6 x brass blades for non-magnetic applications on electronic ignition systems. Blade dimensions 75 x 13mm. Blade Sizes: Steel: 0.002 inch 0.025 inch 0.003 inch 0.004 inch 0.005 inch 0.006 inch 0.007 inch 0.008 inch 0.009 inch 0.010 inch 0.011 inch 0.012 inch 0.013 inch 0.014 inch 0.015 inch 0.016 inch 0.017 inch 0.018 inch 0.019 inch 0.020 inch 0.021 inch 0.022 inch 0.023 inch 0.024 inch 0.025 inch 0.026 inch 0.028 inch 0.030 inch 0.032 inch 0.035 inch Brass: 0.006 inch 0.008 inch 0.010 inch 0.012 inch 0.014 inch 0.016 inch |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS513 info) |
| |
| Air Conditioning Spring Lock Coupling Tool Set |
| Spring type coupling connectors for Air Conditioning lines. Locking action prevents spray when disconnecting lines. Suitable for most Ford, GM (Vauxhall/Opel) and Chrysler Vehicles. Set includes: 3/8, 1/2, 5/8 and 3/4 Couplings. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS0454 info) |
| |
| Auto Engineers Wire Brush Set 3pc |
| Composite handles with hanging holes. Includes small and medium (35 and 110mm headed) brass filled brushes for components such as plugs and contacts and a large steel filled brush (110mm head) for removal of rust and welding slag. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code AK9801 info) |
| |
| Bootlace Crimping Tool |
| Chrome Vanadium steel construction, hardened tempered and blackened for corrosion resistance. Vinyl dipped insulated handle-grips. Suitable for crimping auto-electrical bootlace style terminals. Includes integral cable cutter. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code AK3853 info) |
| |
| Brake & Accelerator Pedal Jack |
| Trigger control unit with infinitely adjustable shaft. Simply position point on desired foot pedal. hook plate under steering wheel and squeeze trigger to depress pedal. Suitable for MOT and diagnostic applications. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS014 info) |
| |
| Camshaft Positioning Tool |
| Adjustable legs allow insertion of pegs into holes in camshaft pulleys. Suitable for coarse and fine positioning of camshaft for timing on a variety of vehicles including Ford Zeta and Zetec engines. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS173 info) |
| |
| Compressed Air Adaptor |
| Use with the VS160 to hold the valves closed whilst spring is compressed. Spark plug adaptor with M14 and M18 threaded fittings for car and light commercial use. Valve assembly maintains cylinder pressure when air supply is cut. Requires a 90-125psi supply. Fitted with standard bayonet air-line coupling. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS1601 info) |
| |
| CV Boot Clamp Pliers |
| Steel jaws with formed handles for extra comfort in use. Suitable for all earless type constant velocity boot clamps. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS1634 info) |
| |
| CVH Valve Spring Compressor - Ford |
| Permits valve stem seal and valve spring replacement without the need to remove the cylinder head. Superior cast design with radiused fulcrum for smooth spring compression. Suitable for CVH Ford engines 1.3, 1.4 and 1.6 as fitted to Escort (inc. XR3i and RS Turbo), Fiesta (inc. RS Turbo) and Orion. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS150 info) |
| |
| Decarbonising Brush Set 2pc 13mm |
| Brassed and crimped steel brushes with flat and pointed trims. Suitable for decarbonising cylinder head ports and components. O6x35mm Shanks. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS1801 info) |
| |
| Ear-Type Hose Clip Pliers |
| Formed steel arms with insulated vinyl handles. Suitable for ear-type hose clips found on fuel, cooling system and vacuum hoses. Also used for securing CV joint boot clamps. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS1633 info) |
| |
| Engineers Wire Brush Set 3pc |
| Composite stocked brush set with hanging location holes. Includes steel, nylon and brass filled heads. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code AK9811 info) |
| |
| Fan Belt Tightening Wrench - 1/2 inch Drive |
| Suitable for use on most alternators. Designed for use with 1/2 inch drive ratchet wrench. Simplifies a normally awkward task. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS097 info) |
| |
| Ferrule Crimping Tool |
| Chrome Vanadium steel construction, hardened tempered and blackened for corrosion resistance. Vinyl dipped insulated handle-grips. Suitable for crimping auto-electrical ferrule style terminals. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code AK3854 info) |
| |
| First Motion Shaft Puller Set with Clutch Clips |
| Set includes short-stroke (80mm) 2lb slide hammer, first motion shaft puller adaptor (5/8UNF-7mm) and set of clutch retaining clips. Suitable for Vauxhall and Opel vehicles fitted with transverse engines, such as Astra, Cavalier, Kadett, 1100, 1300, 1600 and 1800cc. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS012 info) |
| |
| Flat Top Decarbonising Brush 13mm |
| Flat trimmed brushes with brassed and crimped filaments. O6x35mm Shank. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS1802 info) |
| |
| Flat Top Decarbonising Brush 26mm |
| Flat trimmed brushes with brassed and crimped filaments. O6x35mm Shank. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS1803 info) |
| |
| Fuel & Air Conditioning Hose Disconnect Set |
| Die-cast tools suitable for press type quick disconnection joints found on Ford, GM (Vauxhall/Opel) and Chrysler vehicles. Ingenious swivel action allows quick selection of correct sized tool. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS045 info) |
| |
| Glaze Breaker - 3 Leg |
| For removal of heat glaze and carbon deposits on cylinder walls. Fitted with 75mm, medium grade cutting stones and suitable for cylinders up to O175mm. Range collar adjusts arm travel between O50mm and O100mm or O100mm and O175mm. Adjustable spring tension gives finish control. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS162 info) |
| |
| Heavy Duty Ear Type Clamp Pliers |
| Heavy-duty plier with steel jaws and formed handles for extra comfort in use. Suitable for ear-type hose clips found on fuel, cooling system and vacuum hoses. Can also be used for securing late model GM CVJ boot clamps. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS1635 info) |
| |
| Hose & Tube Removal Pliers |
| Spring loaded pliers enable fast and safe removal of hoses and tubes between O5/32 inch and O1/2 inch from hose nipples. Particularly suitable for fuel and vacuum hoses. No need to cut and stretch hoses around the engine bay - simply remove and re-use fitted lengths. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS047 info) |
| |
| Hose Clamp Pliers |
| Suitable for new, tag-type hose clips found on many new production vehicles including Ford, Rover, Peugeot and Renault. 360ø Swivel jaws allow use where access is confined. Spring handle return holds plier jaws open for ease of use. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS166 info) |
| |
| Hose Cutting Tool |
| Ratchet cutter for large diameter rubber and vinyl reinforced* hoses. Suitable for radiator hoses. Heat treated, replaceable stainless steel blade with 42mm capacity. Lightweight, heavy duty die-cast cutter grips. * Not metal reinforced. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS096 info) |
| |
| Hose Plug & Cap Identification Tag Set 49pc |
| Colour coded composite tags suitable for marking position of hoses for re-assembly. Includes caps and plugs suitable for a wide variety of applications including vacuum, coolant, fuel and heater hoses. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS048 info) |
| |
| Infrared Laser Digital AutoPro Thermometer |
| Quick and easy way to diagnose engine and vehicle faults. VS901 detects energy emissions in the infrared spectrum and converts them into a display of temperature. Features laser pointers which indicate the target area being sampled and the optimum thermom |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS901 info) |
| |
| Infrared Laser Digital Thermometer |
| Quick and easy way to diagnose engine and vehicle faults. VS902 detects energy emissions in the infrared spectrum and converts them into a display of temperature. Features laser pointer to indicate the area being sampled. Temperature is displayed on an LC |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS902 info) |
| |
| Infrared Thermometer with Laser Sight |
| Revolutionary new way to tackle diagnosis of engine and vehicle faults. VS900 detects energy emission in the infrared spectrum and converts reading into a display of temperature. Features laser pointer to indicate area being sampled. Temperature is displayed on large LCD panel with back-lit display for use in low light areas. Temperature can be shown in either øC or øF. Powered by 9V battery (not included). |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS900 info) |
| |
| Insulated Spark Plug Pliers |
| Allows safe removal of spark plug boot without pulling the leads from their clips. Insulated handles also prevent electric shock when working on operating ignition system. Vinyl dipped handles and jaws. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code AK866 info) |
| |
| Long Reach Plug Spanners with Tommy Bar |
| Designed for use with deep seated spark plugs. 300mm Long with swivel headed, captive tommy bar. 10mm Version fits many new models including: Ford Escort, Sierra, Peugeot and Citroen. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS520 info) |
| |
| Long Reach Plug Spanners with Tommy Bar |
| Designed for use with deep seated spark plugs. 300mm Long with swivel headed, captive tommy bar. 10mm Version fits many new models including: Ford Escort, Sierra, Peugeot and Citroen. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS521 info) |
| |
| Magnetic Spark Plug Sockets |
| Magnetic spark plug sockets. Chrome Vanadium steel with chrome and satin finish. Supplied carded. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code AK654 info) |
| |
| Magnetic Spark Plug Sockets |
| Magnetic spark plug sockets. Chrome Vanadium steel with chrome and satin finish. Supplied carded. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code AK6541 info) |
| |
| Magnetic Spark Plug Sockets |
| Magnetic spark plug sockets. Chrome Vanadium steel with chrome and satin finish. Supplied carded. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code AK6543 info) |
| |
| Magnetic Spark Plug Sockets |
| Magnetic spark plug sockets. Chrome Vanadium steel with chrome and satin finish. Supplied carded. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code AK6544 info) |
| |
| Mechanic's Stethoscope |
| Quickly locate the source of engine noise such as piston slap, worn gears and bearings, damaged valves, water pump failure, blown gaskets. Also useful tracking down those dash board rattles and squeaks. Plastic ear pieces and 300mm probe with sound amplifying chamber. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code AK871 info) |
| |
| Multi-Valve Valve Spring Compressor |
| Suitable for use on multi valve petrol and diesel engines with deep-seated valves. Suitable also for general use on OHC, OHV and CVH engines. Universal jaw with 55-175mm capacity and 165mm throat depth. Reversible jaw and adaptor. Twin cam action permits use from above or below valve. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS154 info) |
| |
| OHC Valve Spring Compressor |
| Suitable for most small and medium sized OHC engines and also for general use on OHV and CVH engines. Universal jaw with 60-155mm capacity and 160mm throat depth. Parallel lift action with automatic lock. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS153 info) |
| |
| OHV Valve Spring Compressor |
| Suitable for most small and medium sized OHV engines. Fully adjustable jaw with 75-165mm capacity and 150mm throat depth. Parallel lift action with automatic lock. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS152 info) |
| |
| OHV Valve Spring Compressor |
| Permits valve springs and valve stem oil seals to be replaced without the need to remove the cylinder head when used in conjunction with VS1601 compressed air adaptor. Reversible jaw adaptor and automatic cam action lock to pre-set spring tension. Suitable for use on a wide range of OHV, OHC and CVH engines. Note: Not suitable for engines with deep seated valves. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS160 info) |
| |
| OHV Valve Spring Compressor |
| Suitable for the replacement of valve springs and valve stem oil seals without the need to remove the cylinder head. Use in conjunction with VS1601 compressed air adaptor. Adjustable handle, claws and hooks allow use on most OHV engines. Note: Not suitable for vehicles with deep-seated valves. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS168 info) |
| |
| Piston Ring Compressors |
| Quality construction with sprung steel wraps and ratchet action tension mechanism. Supplied with steel key. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS155 info) |
| |
| Piston Ring Compressors |
| Quality construction with sprung steel wraps and ratchet action tension mechanism. Supplied with steel key. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS156 info) |
| |
| Piston Ring Compressors |
| Quality construction with sprung steel wraps and ratchet action tension mechanism. Supplied with steel key. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS157 info) |
| |
| Piston Ring Compressors |
| Quality construction with sprung steel wraps and ratchet action tension mechanism. Supplied with steel key. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS158 info) |
| |
| Piston Ring Groove Cleaner |
| Fast and reliable removal of carbon and glaze deposits from piston ring grooves. Suitable for pistons between O51mm and O127mm. Supplied with 3 x 6-bladed cutters covering most popular piston groove sizes. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS148 info) |
| |
| Piston Ring Installation Pliers |
| Installs and removes piston rings from 3/64 inch to 1/4 inch. Vinyl gripped handles with spring return mechanism. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS164 info) |
| |
| Plug Runner |
| Dual purpose tool. Designed for re-installing spark plugs in engines with deep recessed plugs and at the same time preventing cross threading. Suitable for 10, 12, 14 and 18mm plugs. Also suitable for valve lapping and supplied with large and small lapping heads. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS159 info) |
| |
| Pouch & Wrist Strap for VS900 |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS900/P info) |
| |
| Professional Cylinder Head Service Set 20pc |
| Complete upper engine service kit enables in situ removal and replacement of worn valve springs and guides/bushings. Suitable for 8, 16 and 24 valve engines. Supplied in carry-case. Set Includes: Universal Valve Spring Compressor. Valve Collet Replacement Tool (VS1651). Valve Stem Seal Pliers Long/Straight (VS1671). Valve Stem Seal Pliers Long/Angled (VS1672). Rigid and Flexible Air/Cylinder Hoses. Valve Stem Seal Replacement Kit (5, 6, 7, 8, 10, 11.5mm). |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS169 info) |
| |
| Pulley Locking Tool |
| Suitable for locking V-belt pulleys as found on water pumps and alternators. Use in conjunction with spanner or ratchet. May be used to rotate camshaft pulleys for timing purposes and also for removal of oil and fuel filters. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS094 info) |
| |
| Ramp Type Spark Plug Gauge |
| Mechanic's plug gap tool adjusts plug gap in graduated ramp sequence. Dual marked in inches from .020 inch to .100 inch and metric from 0.6 to 2.4mm. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS119 info) |
| |
| Rocker Arm & Valve Compensator Tool |
| Suitable for use on GM (Vauxhall/Opel) OHC engines. Permits quick, on vehicle, removal of rocker arm and valve play compensator. Mounts on camshaft housing. Cast construction with knurled hex head fixing. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS151 info) |
| |
| Spare Stone Sets for Glaze Breaker |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS1621 info) |
| |
| Spare Stone Sets for Glaze Breaker |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS1622 info) |
| |
| Spare Stone Sets for Glaze Breaker |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS1623 info) |
| |
| Spark Plug Boot Puller Tongs |
| Fully insulated tongs designed for removal/installation of spark plug boot. Reduces risk of electric shock or burns while checking installation of plug leads whilst running engine. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code AK865 info) |
| |
| Spark Plug Thread Chasers |
| Suitable for cleaning corrosion and carbon build up from spark plug threads. Also possible to restore minor cross threading damage. Use with a spark plug tube spanner or socket. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS524 info) |
| |
| Spark Plug Thread Chasers |
| Suitable for cleaning corrosion and carbon build up from spark plug threads. Also possible to restore minor cross threading damage. Use with a spark plug tube spanner or socket. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS525 info) |
| |
| Swivel Handled Plug Spanners |
| Designed for general purpose workshop use and available in both popular sizes. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS522 info) |
| |
| Swivel Handled Plug Spanners |
| Designed for general purpose workshop use and available in both popular sizes. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS523 info) |
| |
| T-Bar & Magnetic Spark Plug Socket Set 3pc |
| Comfort grip T-handle 3/8 wobble bar driver with satin finish. Supplied with 16mm and 21mm Chrome Vanadium magnetic spark plug sockets with knurled rings, suitable for 10mm and 14mm spark plugs. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code AK6550 info) |
| |
| Technicians Angular Torque Gauge 1/2 inchSq Drive |
| Designed to be used with any 1/2 inch drive torque wrench. Tough composite dial and rotating index line allow operator to accurately tighten fixing to manufacturer's exact specification. Supplied with fully adjustable reaction arm. Essential measuring tool for the busy workshop. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS530 info) |
| |
| Technicians Stethoscope |
| High quality stethoscope. Probe attachment quickly locates source of engine noise such as piston slap, worn gears and bearings, damaged valves, water pump failure, blown gaskets. Also aids tracking down of dash-board rattles and squeaks. Rubber trumpet used when checking vacuum and pressure flow - ideal for balancing carburettors. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS871 info) |
| |
| TRX-Star* Cylinder Head Bolt Key 1/2 inch Sq Drive - M |
| 1/2Sq drive satin finish Chrome Vanadium steel socket with knurled ring. 100mm Chrome Molybdenum steel shaft. Suitable for Ford cylinder head bolts on 1.8 Diesel and Turbo Diesel engines on Fiesta, Escort, Orion, Mondeo, and P100. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code AK553 info) |
| |
| TRX-Star* Cylinder Head Bolt Key 1/2 inch Sq Drive - T |
| 1/2 inchSq drive satin finish Chrome Vanadium steel socket with knurled ring. 125mm Chrome Molybdenum steel shaft. Suitable for Ford cylinder head bolts on V6 and OHC engines from 1985 onwards. Also fits differential filler plug on Sierra and Scorpio. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code AK552 info) |
| |
| Universal Clutch Alignment Tool |
| Chemically blackened steel components in presentation box. Aids alignment of clutch plate for assembly. Applications: Audi, Citroen, Fiat, Ford, Honda, Mazda, Mitsubishi, Nissan, Opel, Peugeot, Renault, Rover, Saab, Toyota, Vauxhall, VW, Volvo. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code AK710 info) |
| |
| Universal Clutch Alignment Tool |
| Nylon components with brass main shaft. Allows the clutch plate and the pressure plate to be assembled 'on the bench', making clutch changes a one handed operation. Fits 90% of cars and light vans up to 5 tons gross (not suitable for Minis or vehicles with double plate clutches). Suitable for front wheel drive vehicles. Supplied with 2 different sized expanding collets. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS010 info) |
| |
| Universal Joint Magnetic Spark Plug Sockets - Long |
| Magnetic plug sockets with built in extension bar and universal joint. Chrome Vanadium steel with chrome and satin finish. Use ratchet or T-Bar (supplied) to drive. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code AK6545 info) |
| |
| Universal Joint Magnetic Spark Plug Sockets - Long |
| Magnetic plug sockets with built in extension bar and universal joint. Chrome Vanadium steel with chrome and satin finish. Use ratchet or T-Bar (supplied) to drive. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code AK6546 info) |
| |
| Universal Joint Magnetic Spark Plug Sockets - Long |
| Magnetic plug sockets with built in extension bar and universal joint. Chrome Vanadium steel with chrome and satin finish. Use ratchet or T-Bar (supplied) to drive. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code AK6547 info) |
| |
| Universal Joint Magnetic Spark Plug Sockets - Long |
| Magnetic plug sockets with built in extension bar and universal joint. Chrome Vanadium steel with chrome and satin finish. Use ratchet or T-Bar (supplied) to drive. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code AK6548 info) |
| |
| Vacuum Testing & Brake Bleeding Kit |
| Die-cast alloy body with vacuum gauge and full accessory kit. Helps identify faults on vehicle systems including fuel, ignition, transmission and emissions. Set includes collection container for vacuum clutch and brake bleeding. Includes bleed nipple conn |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS401 info) |
| |
| Valve Collet Installation & Magnetic Pick Set 4pc |
| Suitable for the installation and removal of valve collets on all sizes of engine. Specifically designed for use with valve spring compressors where access to the collets is limited - VS153, VS154. Particularly suitable for on vehicle compressors - VS160, VS168, VS169. Allows side access to valve collets. Magnetic heads assist with retrieval of collets. Supplied with magnetic probe. Includes carry-case. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS1652 info) |
| |
| Valve Collet Installer/Remover |
| Spring loaded shaft and clips aid simple and secure installation of valve spring collets. Quick and easy retrieval of lost collets using magnetic tip. Suitable for 8 or 16 and 24 valve engines. Ideal for use on heads with recessed valves. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS165 info) |
| |
| Valve Collet Installer/Remover |
| Spring loaded shaft and clips aid simple and secure installation of valve spring collets. Quick and easy retrieval of lost collets using magnetic tip. Suitable for 8 or 16 and 24 valve engines. Ideal for use on heads with recessed valves. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS1651 info) |
| |
| Valve Stem Seal Pliers - Long Stem 16/24 Valve |
| Steel pliers with insulated handles. Long stem aids removal and installation of valve stem seals on 16 valve and 24 valve OHC engines. Serrated tips aid grip. Especially suited to stubborn seals. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS1671 info) |
| |
| Valve Stem Seal Pliers - Long Stem 16/24 Valve |
| Steel pliers with insulated handles. Long stem aids removal and installation of valve stem seals on 16 valve and 24 valve OHC engines. Serrated tips aid grip. Especially suited to stubborn seals. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS1672 info) |
| |
| Valve Stem Seal Pliers - Straight 8 Valve |
| Steel pliers with insulated handles. Suitable for the removal and installation of valve stem seals on 8 valve OHC engines. Serrated tips aid grip. Especially suited to stubborn seals. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS167 info) |
| |
| V-Belt Installer/Remover 2pc |
| Ingenious tool suitable for use on all common sizes of V-belt. Simply clip onto belt and run the tool into the pulley. The device lifts and derails the belt off the pulley. Reverse tool for installation. Suitable for automotive and engineering applications. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS0941 info) |
| |
| Viscous Fan Holding Tool |
| Use in conjunction with VS092 and VS093. Prevents fan from rotating without risk of damaging fan (or fingers). Manufactured from carbon steel. Hardened and tempered. Vinyl dipped handle. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS095 info) |
| |
| Viscous Hub Spanners |
| Suitable for removing thermo-viscous fan hubs as fitted to BMW, Ford and GM vehicles. Carbon steel construction. Hardened and tempered with vinyl handle. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS092 info) |
| |
| Viscous Hub Spanners |
| Suitable for removing thermo-viscous fan hubs as fitted to BMW, Ford and GM vehicles. Carbon steel construction. Hardened and tempered with vinyl handle. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS093 info) |
| |
| Water Pump Wrenches |
| Adjusts the timing belt tension on GM (Vauxhall/Opel) and Daewoo OHC engines by rotating the water pump on its eccentric mounting. Use with 1/2 drive ratchet. Manufactured from carbon steel. Hardened, tempered and zinc plated. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS090 info) |
| |
| Water Pump Wrenches |
| Adjusts the timing belt tension on GM (Vauxhall/Opel) and Daewoo OHC engines by rotating the water pump on its eccentric mounting. Use with 1/2 drive ratchet. Manufactured from carbon steel. Hardened, tempered and zinc plated. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS091 info) |
| |
| Workshop Angular Torque Gauge 1/2 inch Sq Drive |
| Designed to be used with any 1/2 inch drive torque wrench. Allows operator to accurately tighten fixing to manufacturer's exact specification. Essential measuring tool for the busy workshop. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS531 info) |
| |
| Wrinkle Band Spring Compressor |
| Wrinkled spring steel compression band reduces surface contact friction and prevents tool from slipping into the cylinder bore. Cam action compression allows one time setting of piston diameter enabling fast insertion of all piston assemblies. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code VS149 info) |
| |
| XZN Cylinder Head Bolt Key 1/2 inchSq Drive - M14 |
| 1/2 inchSq drive satin finish Chrome Vanadium steel socket with knurled ring. 100mm Chrome Molybdenum steel shaft. Suitable for Rover 800 2.5D cylinder head bolts and VW Type 4 Transporter bottom wishbone bolts. |
| CLICK HERE TO BUY AT CCW |
| (Vehicle Service Tools Code AK5531 info) |
| |
