Air Tools: Drills
|
Shop for Air Tools and other garage equipment in the
Classic Wheels online toolstore
You're in the drills section of the Classic Wheels toolshop, describing these and other
air tools available at the Classic Car World (CCW) online store.
CCW are a specialist supplier of workshop and garage tools over the 'net, and listed below are the drills
they have for sale in the air tools area of their catalogue. For their very latest prices please visit their site.
As well as low prices on new drills, you can find hundreds of other tools, just check out the left hand
category menu and have a look around at other air tools they have. They stock all the leading brands, such
as Sealey.
|
| 1/2 inch Reversible Air Drill |
| Big capacity drill with polished aluminium housing, heavy duty, planetary gear drive assembly and 1/2 chuck. Fitted with flip-reverse control. Supplied with side handle, chuck and key. Suitable for heavy workshop use. |
| CLICK HERE TO BUY AT CCW |
| (Air Tools Code SA27 info) |
| |
| 1/2 inch Super Duty Air Pistol Drill |
| Fully polished finish with exhaust through handle base for reduced noise emission. Smooth air motor runs on high quality ball bearings for long life and reliability. Fully reversible drive with finger-tip control set above trigger. Fitted with Jacobs keyless chuck for fast bit changes. Supplied with side handle. Rubber grip gives added control. |
| CLICK HERE TO BUY AT CCW |
| (Air Tools Code SA621 info) |
| |
| 1050Watt Variable Speed Electric Hammer Drill |
| Heavy-duty professional hammer drill with electronic variable speed and reverse controls. Suitable for driving and removing screws. Two speed mechanical gearbox gives added versatility and hammer action allows 22mm capacity in masonry. Features high quality keyless chuck for fast bit changes. Supplied with adjustable side handle and depth stop. Supplied in carry-case. |
| CLICK HERE TO BUY AT CCW |
| (Air Tools Code SDE1050 info) |
| |
| 3/8 inch Air Drill |
| Polished aluminium housing with planetary gear drive assembly. Fitted with 3/8 inch drill chuck and supplied with chuck key. Suitable for general workshop use. |
| CLICK HERE TO BUY AT CCW |
| (Air Tools Code SA23/S info) |
| |
| 3/8 inch Reversible Air Angle Drill |
| Right angle air drill with 90ø planetary gearbox. Ideal for drilling in hard to get at areas where normal drills will not fit. Push-button reverse feature suitable for driving fixings. Supplied with 3/8 inch chuck and key. |
| CLICK HERE TO BUY AT CCW |
| (Air Tools Code SA26 info) |
| |
| 3/8 inch Reversible Air Drill |
| Polished aluminium housing with planetary gear drive assembly. Features reversible action making this tool suitable for driving fixings. Fitted with 3/8 inch drill chuck and supplied with chuck key. Suitable for general workshop use. |
| CLICK HERE TO BUY AT CCW |
| (Air Tools Code SA24 info) |
| |
| 3/8 inch Spot Weld Cutter |
| Spring loaded centre point guides cutter crown onto spot weld. Fine adjustment of cutting depth by screw permits top panel to be removed leaving the lower panel free to be dressed clean for replacement panel. Suitable for air and electric drills. |
| CLICK HERE TO BUY AT CCW |
| (Air Tools Code Z1 info) |
| |
| 3/8 inch Super Duty Air Pistol Drill |
| Fully polished finish with exhaust through handle base for reduced noise emission. Smooth air motor runs on high quality ball bearings for long life and reliability. Fully reversible drive with finger-tip control set above trigger. Fitted with Jacobs keyless chuck for fast bit changes. Rubber grip gives added control. |
| CLICK HERE TO BUY AT CCW |
| (Air Tools Code SA620 info) |
| |
| 3/8 inch Super Duty Straight Air Drill |
| Fully polished finish with exhaust through rear for reduced noise emission. Smooth air motor runs on high quality ball bearings for long life and reliability. Safety trigger prevents inadvertent operation. Full cage type gearbox gives added torque. Fitted with Jacobs keyless chuck for fast bit changes. |
| CLICK HERE TO BUY AT CCW |
| (Air Tools Code SA622 info) |
| |
| 6.5mm Drill Bit for SA76 |
| CLICK HERE TO BUY AT CCW |
| (Air Tools Code SA76/36-6.5 info) |
| |
| 600Watt Electronic 2 Speed Electric Hammer Drill |
| Professional hammer drill with electronic dual speed control. Hammer action and 1/2 chuck gives 13mm capacity in masonry. Features non-slip grip and integral chuck key storage. Supplied with adjustable side handle, depth stop and chuck key. |
| CLICK HERE TO BUY AT CCW |
| (Air Tools Code SDE600 info) |
| |
| 650Watt Variable Speed Electric Hammer Drill |
| Heavy duty professional hammer drill with electronic variable speed and reverse controls. Suitable for driving and removing screws. 1/2 Chuck capacity coupled to gearbox with drill and hammer modes. Features non-slip grip and integral spirit level. Supplied with adjustable side handle, depth stop and chuck key. |
| CLICK HERE TO BUY AT CCW |
| (Air Tools Code SDE650 info) |
| |
| 850Watt Variable Speed Electric Hammer Drill |
| Heavy-duty professional hammer drill with electronic variable speed and reverse controls. Suitable for driving and removing screws. Two speed mechanical gearbox gives added versatility and hammer action allows 20mm capacity in masonry. Features high quality keyless chuck for fast bit changes. Supplied with adjustable side handle and depth stop. Supplied in carry-case. |
| CLICK HERE TO BUY AT CCW |
| (Air Tools Code SDE850 info) |
| |
| 8mm Drill Bit for SA76 |
| CLICK HERE TO BUY AT CCW |
| (Air Tools Code SA76/36-8 info) |
| |
| Air Spot Weld Drill |
| Quick and simple removal of all types of spot weld. Simply insert a O6.5mm or O8mm spot drill and set the depth on the nose of the tool. This drill can even take out a spot-weld, a panel at a time, without damaging the panels below. Supplied with O6.5mm drill bit. |
| CLICK HERE TO BUY AT CCW |
| (Air Tools Code SA76 info) |
| |
| Drill Chucks and Keys |
| Not Illustrated Spare Drill Chucks and keys for models on this page |
| CLICK HERE TO BUY AT CCW |
| (Air Tools Code SA27T/02 info) |
| |
| Drill Chucks and Keys |
| Not Illustrated Spare Drill Chucks and keys for models on this page |
| CLICK HERE TO BUY AT CCW |
| (Air Tools Code SA27T/02A info) |
| |
| Electric SDS Hammer Drill 1010W/230V |
| Heavy-duty electric motor coupled to high efficiency pneumatic impact gearbox. Includes rotary drill plus rotary and static hammer functions and is suitable for use with SDS type drill bits and chisels. Supplied with adjustable side handle and depth stop |
| CLICK HERE TO BUY AT CCW |
| (Air Tools Code SDS1010 info) |
| |
| Electric SDS Hammer Drill 850W/230V |
| Heavy-duty electric motor coupled to high efficiency pneumatic impact gearbox. Includes rotary drill plus rotary and static hammer functions and is suitable for use with SDS type drill bits and chisels. Supplied with adjustable side handle and depth stop |
| CLICK HERE TO BUY AT CCW |
| (Air Tools Code SDS850 info) |
| |
| Hammer Drill 13mm 2 Mechanical/Variable Speed 1000W/230V |
| Professional heavy-duty 1000Watt hammer drill with variable speed and reverse controls. Suitable for driving and removing screws. Two speed mechanical gearbox gives added versatility and hammer action allows up to 16mm capacity in masonry. Features high q |
| CLICK HERE TO BUY AT CCW |
| (Air Tools Code SD1000 info) |
| |
| Hammer Drill 13mm Variable Speed with Reverse 800W/230V |
| Professional 800Watt hammer drill with variable speed and reverse controls. Suitable for driving and removing screws. Hammer action allows up to 13mm capacity in masonry. Features high quality chuck, soft grip handle and is supplied with adjustable side h |
| CLICK HERE TO BUY AT CCW |
| (Air Tools Code SD800 info) |
| |
| Keyless Chuck for SD800 & SD1000 |
| Keyless chuck suitable as an optional extra for Model Nos. SD800 & SD1000 |
| CLICK HERE TO BUY AT CCW |
| (Air Tools Code SD1000KC info) |
| |
| Replacement Cutter Crowns |
| Double sided cutter crowns for Z1 spot removal tool. Pack of 2. |
| CLICK HERE TO BUY AT CCW |
| (Air Tools Code Z1C2 info) |
| |
| SDS Electric Hammer Drills |
| Heavy duty electric motor coupled to high efficiency pneumatic impact gearbox. Includes rotary drill plus rotary and static hammer functions and is suitable for use with SDS type drill bits and chisels. Supplied with adjustable side handle and depth stop plus rubber chuck gaiter to protect unit from falling dust and masonry when drilling inverted. Accessory kit supplied includes three SDS type drills, two chisels, a tub of chuck lubricant and a spare set of carbon brushes. Also includes 1/2 drill chuck, SDS adaptor and key for use with regular drill bits. Supplied in carry-case. |
| CLICK HERE TO BUY AT CCW |
| (Air Tools Code SDS620 info) |
| |
| SDS Electric Hammer Drills |
| Heavy duty electric motor coupled to high efficiency pneumatic impact gearbox. Includes rotary drill plus rotary and static hammer functions and is suitable for use with SDS type drill bits and chisels. Supplied with adjustable side handle and depth stop plus rubber chuck gaiter to protect unit from falling dust and masonry when drilling inverted. Accessory kit supplied includes three SDS type drills, two chisels, a tub of chuck lubricant and a spare set of carbon brushes. Also includes 1/2 drill chuck, SDS adaptor and key for use with regular drill bits. Supplied in carry-case. |
| CLICK HERE TO BUY AT CCW |
| (Air Tools Code SDS620/110V info) |
| |
