Jacking & Lifting: Cycle Products
|
Shop for Jacking & Lifting and other garage equipment in the
Classic Wheels online toolstore
You're in the cycle products section of the Classic Wheels toolshop, describing these and other
jacking & lifting available at the Classic Car World (CCW) online store.
CCW are a specialist supplier of workshop and garage tools over the 'net, and listed below are the cycle products
they have for sale in the jacking & lifting area of their catalogue. For their very latest prices please visit their site.
As well as low prices on new cycle products, you can find hundreds of other tools, just check out the left hand
category menu and have a look around at other jacking & lifting they have. They stock all the leading brands, such
as Sealey.
|
| 4x4 Adaptor Kit |
| CLICK HERE TO BUY AT CCW |
| (Jacking & Lifting Code BS4/BC2071 info) |
| |
| Bicycle Storage Rack |
| Wall mounting storage rack with two arms, that will support up to 2 bikes. |
| CLICK HERE TO BUY AT CCW |
| (Jacking & Lifting Code BS6 info) |
| |
| Cycle Carrier Lighting Board |
| Composite 3ft board fitted with two metres of 7 core cable and 12 Volt N type plug. Includes 2 x e approved reflective triangles and 2 x 4-function lamp cluster (stop, tail, indicator and number plate illumination light). Important: Standard trailer boards must not be used in conjunction with cycle carriers. |
| CLICK HERE TO BUY AT CCW |
| (Jacking & Lifting Code TB3/2 info) |
| |
| Cycle Rack 3 Cycle |
| Heavy-duty cycle rack with three cycle capacity. Manufactured from steel with zinc plating for extra corrosion resistance. |
| CLICK HERE TO BUY AT CCW |
| (Jacking & Lifting Code BS11 info) |
| |
| Cycle Rack 5 Cycle |
| Heavy-duty cycle rack with five cycle capacity. Manufactured from steel with zinc plating for extra corrosion resistance. |
| CLICK HERE TO BUY AT CCW |
| (Jacking & Lifting Code BS12 info) |
| |
| Cycle Rack Module 1 Cycle |
| Single modular cycle rack system, can be joined together for desired number of cycles. Manufactured from steel with zinc plating for extra corrosion resistance. Fitted with two fixing plates for floor mounting. |
| CLICK HERE TO BUY AT CCW |
| (Jacking & Lifting Code BS10 info) |
| |
| Cycle Rack Wall Mounted Folding |
| Wall mounting storage rack. Two folding arms can be swung up when unloaded for compact storage. Support up to 2 bikes. |
| CLICK HERE TO BUY AT CCW |
| (Jacking & Lifting Code BS7 info) |
| |
| Extension Arm Kit |
| CLICK HERE TO BUY AT CCW |
| (Jacking & Lifting Code BS4/BC2072 info) |
| |
| Glass Hatch Back Adaptor Kit |
| CLICK HERE TO BUY AT CCW |
| (Jacking & Lifting Code BS3/1 info) |
| |
| Rear Cycle Carrier 3 Cycles |
| Rigid yet lightweight carrier designed to fit most saloons, hatchbacks, vans, estates and coupes. Carries up to 3 standard cycles and includes 6 nylon fixing straps and foam rubber tubes for protection to both vehicle and bikes. Folds away for easy storage. Model No. BS3/1 - Set of adaptors for use when fixing straps of cycle carrier to glass edged hatches. |
| CLICK HERE TO BUY AT CCW |
| (Jacking & Lifting Code BS3 info) |
| |
| Tow Ball Cycle Carrier 2 Cycles |
| Strong tubular construction. Mounts firmly onto any O50mm tow-ball in seconds and will carry 2 cycles. Positive lock action includes a provision for anti-theft lock (not included). Folds down flat for storage. |
| CLICK HERE TO BUY AT CCW |
| (Jacking & Lifting Code BS2 info) |
| |
| Tow Bar Cycle Carrier 3 Cycles |
| Designed to slot onto plate fixed behind the tow ball. Allows transportation of cycles even when towing a caravan or trailer. Carries 3 bikes (2 mountain bikes) and is fitted with rubber protectors to prevent damage to frames. Also supplied with padlock and keys for security. When not in use, frame slots onto 2 wall brackets allowing cycles to be stored tidily away. Optional BS4/BC2071 Adaptor kit for cycle carrier needed when fitting to 4x4 vehicles with rear mounted spare wheels. Also available BS4/BC2072 Extension Arms for BS4 Cycle Carrier. |
| CLICK HERE TO BUY AT CCW |
| (Jacking & Lifting Code BS4 info) |
| |
| Wall Mounted Workshop Bicycle Stand |
| Zinc plated steel tubes with aluminium wall and arm castings. High impact resistant jaws swivel through 360ø and will accept down-tubes, crossbars and seat-posts of racing, mountain and hybrid bikes. Suitable for both maintenance procedures and storage. Wall mountings included. |
| CLICK HERE TO BUY AT CCW |
| (Jacking & Lifting Code BS5 info) |
| |
| Workshop Bicycle Stand |
| Corrosion resistant zinc plated steel tubes constructed with aluminium head and foot castings for strength and durability. High impact resistant jaws swivel through 360ø and will accept down-tubes, crossbars and seat-posts of racing, mountain and hybrid bikes. Multi-position storage tray ensures tools are always close at hand and includes a can holder. Legs and top arm are removable for ease of storage. |
| CLICK HERE TO BUY AT CCW |
| (Jacking & Lifting Code BS1 info) |
| |
